Public Works Department Tender

Supplying and fixing 63 A 4P, MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting inwith SS enclosure with IP- 20/30 protection, pwder coated provision for housing Four pole (4P) MCCB, concealed in wall after cutting the wall & mending good the damages to original finish / on flat iron frame incl. painting, connection & provision for earthing attachment. (Make:-Legrand/Seimens/LK)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Make: RR Kabel/Finolex/Polycab/ Havells/ Mescab) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Make- Legrand, Arteor/Myrius) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC a) Average run 9 mtr.

Distn. wiring in 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC in single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Make: RR Kabel/Finolex/Polycab/ Havells/ Mescab) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Make- Legrand, Arteor/Myrius) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish., as to GS. a) On Board

Supply & Fixing 240 V, 4 nos. 16 A, 3 pin Modular type plug socket with 4 nos. 16A Modular type switch (Make- Legrand, Arteor/Myrius), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Make- Legrand, Arteor/Myrius) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make- Legrand, Arteor/Myrius), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Make- Legrand, Arteor/Myrius) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Make- Legrand, Arteor/Myrius) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/ 0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Make- Legrand, Arteor/Myrius) on existing Modular GI switch board with top cover plate incl. making necy. connections etc., as per G.S

Supply & delivery of 4 core 50 sqmm., Alluminium armoured XLPE insulated Cable. (Make: RR Kabel/ Havells/ Gloster/ Polycab)

Laying of cable from 4 core 50 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Supply & laying of 1.1KV single core stranded FRLS PVC insulated & unsheathed copper wire (Make:RRKabel/Finolex/Polycab/Havells/Mescab) in 19/25 mm dia polythene pipe after cutting channel of suitable size, concealed in wall, incl. mending good the damages

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC.

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC.

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

1.5 sqmm

2.5 sqmm

4.0 sqmm

10 sqmm

16 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as 4 Core 50 Sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials as 4 Core 50 Sqmm.

Supply & delivery of 18 watt, 2100 lm, 4ft,LED tube light Polycarbonate, Color: Cool Day Light. (Make: Philips/Crompton/Wipro

S & F of 240V, 25A Timer Controller for AC machine in SS double door (2+10) way DB enclosure with IP-43 (Make: L&T/Schneider/ ABB) with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4sqmm & 1x2.5 sqmm copper wire with dowels solder less socket by crimping method as to GS earthing attachment on wall incl. necessary connections as per direction of EIC. i) 10KA C-curve, 240V 25A DP MCB (Make: LK/Schneider/ ABB)—1No. ii) 24HR programmable digital Timer (Make: LK/Schneider/ ABB) ---1 No. iii) 3 Pole power contractor (LK make cat no-MNX22/230V) with 01 no NO+01NC additional contact block---1set iv) 2 Module AC motor starter (Make: Legrand-Myrius)-----1 No. v) 2 Module plate with cover (Make: Legrand-Myrius)-----1 No vi) 20A Auto-Off-Bypass SPDT toggle switch (Approved/ Reputed make)---1 No. vii) 10A SPST Modular type switch (Make: Legrand-Myrius)---1No. viii) Outgoing connector make ELMAX (Approved make)---1 No. ix) LED indicator----01No

Earthing Installation –

Excavation of soil for installation of Earth Electrode and filling & ramming. For soft soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA-Medium GI pipe.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

[Make and model no. of each and every item to be approved by EIC]