Public Works Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Public Works Department - PWD Tender
Civil And Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date6 Jun 2024
Closing Date5 Jul 2024
Tender Amount₹ 1,36,86,010
Costs
EMD
₹ 2,73,720Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_689826_1Bid Award Id
ViewTender No
WBPWD/SEWC-II/NIT 01/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://wbpwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
1421.35
417877
294
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
Pakur Variety
209.86
1015036
4836.73
Brick work with 1st class bricks in cement mortar (1:6)
In foundation and plinth
77.18
344227
4460.06
Brick work with 1st class bricks in cement mortar (1:6)
In superstructure, Ground floor
129.17
604911
4683.06
Brick work with 1st class bricks in cement mortar (1:6)
1st floor
13.14
62994
4794.06
Controlled Cement concrete with well graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS: 456 and relevant special publications submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-In-Charge. Consumption of cement will not be less than 300kg. of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test & job-mix formula. In ground floor and foundation. [using concrete mixture] M-25 Grade Pakur Variety
Ground floor
319.44
1857927
5816.2
M-25 Grade Using Pakur Varitey stone chips
Pakur Variety
In 1st floor
12.19
72058
5911.2
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to direction. For works in foundation and upto roof of ground floor/upto 4 m Tor steel/Mild Steel (SAIL/TATA /RINL) In ground floor
33.67
1856363
55134.03
In 1st floor
1.72
95681
55564.03
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
25 mm to 30 mm thick wooden shuttering with staging in foundation
154.85
31435
203
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
In ground floor
1456.09
519824
357
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
In 1st floor
102
38250
375
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
84.07
51916
617.53
1st floor.
81.85
51527
629.53
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) With earth obtained from excavation of foundation.
410.87
31859
77.54
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
1421.35
34112
24
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Malayasian
In ground floor
0.42
31808
76096
1st floor.
0.07
4959
76296
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) 40mm X 6mm, 250 mm Length
54
1566
29
Supplying solid flush type doors of deluxe decorative (both side) quality,
conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:
35mm thick shutters (single leaf)
In ground floor
14.48
57268
3955
35mm thick shutters (single leaf)
1st floor.
1.68
6668
3969
Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. 300mm x 16mm dia. Bolt
9
2079
231
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
150mm long x 12mm dia. bolt.
4
352
88
225 mm long x 12mm dia. bolt.
12
1368
114
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
With continuous plate base (Hexagonal/ Round rod)
150 mm grip x 12 mm dia rod.
28
3108
111
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
100mm. X 58mm. X 1.90mm.
56
2632
47
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
5.88
58141
9888
Collapsible gate with 40 mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.
In ground floor
14.96
64777
4330
Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.
37.5
122625
3270
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.
Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.
For structural members of specified sections weighing less than
22.5 Kg./m
8.25
598975
72603
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).
15 Micron colour annodizing
4- track sliding window
Bottom frame
20.4
8976
440
15 Micron colour annodizing
4- track sliding window
Top and side frame
57.3
21774
380
15 Micron colour annodizing
Shutter for all track sliding window
Bottom and Top member
44.32
6072
137
15 Micron colour annodizing
Shutter for all track sliding window
Style side member
36.9
4871
132
15 Micron colour annodizing
Shutter for all track sliding window
Interlock member
110.7
18376
166
15 Micron colour annodizing
Louvered window
Top, Bottom and side member
12
2352
196
15 Micron colour annodizing
Louvered window
Louvered Section
7.2
4903
681
15 Micron colour annodizing
Louvered window
Cleat angle (Non-Annodized)
7.2
1894
263
15 Micron colour annodizing
Fixed glazing
Top, Bottom and side member
14.4
4882
339
15 Micron colour annodizing
Fixed glazing
Mullion
3.6
1307
363
15 Micron colour annodizing
Fixed glazing
Glazing clip
21.6
1080
50
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium
sections for the following units:-
Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built
locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM
gasketing in between window frame and masonry work (walls, column,
beam.lintels etc.) as well as between glass and shutter frame for fixing
glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all
incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
3 /4 track sliding window
29.16
27440
941
Fixed glazing.
3.24
2488
768
Louvered window.
2.16
1577
730
Supplying PVC rollers for sliding windows as per direction of Engineer in charge
112
1568
14
Supplying maruti lock (100mm)
28
1288
46
Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.
For sliding windows
'U' shaped EPDM gasket for frames.
310.8
4662
15
Filling the gap in between aluminium frame & adjacent RCC / Brick/
Stone work by providing weather silicon sealant over 6mm dia backer
rod of approved quality as per architectural drawings and direction of
Engineer-in-Charge complete.
Upto 5 mm depth and 5 mm width
Ground Floor
81.3
5610
69
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;
coloured, toughened glass conforming to IS: 2553-1992 (part-II)
6mm thick
34.56
37083
1073
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..
66mm x 90mm
9.9
4920
497
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.
In ground floor.
32 mm thick
2.95
8151
2763
"Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] " With 1:6 cement mortar 20 mm thick plaster
991.54
148463
149.73
With 1:6 cement mortar 20 mm thick plaster
60.34
9276
153.73
With 1:4 cement mortar 10 mm thick plaster
In ground floor
616.36
73686
119.55
With 1:4 cement mortar 10 mm thick plaster
In 1st floor
29.64
3662
123.55
With 1:6 cement mortar 15 mm thick plaster
In Ground floor
433
57394
132.55
With 1:6 cement mortar 15 mm thick plaster
In 1st floor
231.46
31606
136.55
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
718.23
23529
32.76
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic
adhesive & grout materials etc.
Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Area of each tile upto 0.09 Sq.m
Coloured decorative
65.21
70716
1084.43
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).
In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength 1500 N
15.42
24386
1581.43
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after
application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other
incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) With application slurry @1.75 kg/ Sq.m, 20 mm sand
cement mortar (1:4) & 2 mm thick cement slurry at back side
of tiles, 0.2 kg/ Sq.m white cement for joint filling with
pigment.
Deep Colour & White
74.29
124171
1671.43
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing
work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0
kg/Sq.m]
273.44
271920
994.44
Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete.
[Using cement slurry at back side of granite @ 4.4 kg/sq.m &
white cement slurry for joint filling @ 1.8 kg/sq.m]
In ground floor Area of each Granite slab 0.6 to 1.0 Square meter.
17.72
58723
3313.95
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.
In ground floor
Area of each Granite slab 0.6 to 1.0 Square meter.
95.57
262165
2743.17
Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.
9
9729
1081
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
422.72
12259
29
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
10.86
412
38
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. On steel or other metal surface : With super gloss (hi-gloss) - Two coats (with any shade except white) "
422.72
33395
79
On timber or plastered surface : With super gloss (hi-gloss) - Two coats (with any shade except white)
10.86
880
81
"Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) In ground floor
One coats
1347.16
45399
33.7
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
In Ground Floor:
Two Coat
572.38
25814
45.1
In 1st floor
Two coats
231.46
10603
45.81
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :Two coats Luxary Quality
1347.16
94301
70
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). In ground floor
1257.18
153376
122
In 1st floor
89.98
11042
122.72
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Premium 100% Acrylic Emulsion
In ground floor
Two coats
(Premium 100% Acrylic Emulsion)
572.38
48080
84
In 1st floor Two coats
(Premium 100% Acrylic Emulsion)
231.46
19607
84.71
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. UPVC Pipes: 110 mm. Dia
44
11044
251
UPVC Pipes: Bending 87.5 degree 110 mm. Dia
16
2560
160
UPVC Pipes: Plain Tee 110 mm. Dia
8
1376
172
Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work)
With carried earth arranged by the contractor within a radius of 3 Km including cost of carried earth
625
237388
379.82
Supplying and Laying in the specified pattern of Interlocking Concrete Block Pavement (ICBP) with concrete blocks (with concrete grade as specififed as per Table I of IS : 15658-2006) manufacturered in steel mould clamped to a vibrating table by hydrulic pressure (as per cl no. 6.30 of IRC :SP:63:(2018), from BIS licesee manufactuuer, with spacer nib (Small protroding profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the apving blocks, as per cl No. 3.26 of (IS: 15658) and of specified size shape with aspect ratio (The ratio of length to thicknes of paver block, as per Cl No. 3.3 of 15658) as per Table 2 of IS 15658 with flexural strenghth/braking load asper Annexure G of IS:15658, on the prepared base course of spcified CBR as per Table I of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per cluase 6.5.1. of IRC SP 63) and filling up gaps in between paver blocks with joint filling sand (the grading of the joint filling sand will be as per 6.5.2. of IRC SP 63) and completing the edges with cut blocks as per Cl. No. 8.7 of IRC SP - 63 (2018) with proper confinement and joint filling sand compacting, levelling and filling up of the edges gap.
Colour Decrative
120 mm thick
420
777000
1850
S & P Works
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster .
With Pakur variety (Other than SAIL/TATA/RINL)
10
63386
6338.63
"Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.
With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. With Pakur variety (Other than SAIL/TATA/RINL)
2
28761
14380.54
"Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings For 30 users
With Pakur variety (SAIL/TATA/RINL)
1
55726
55726.48
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 2000 litre capacity
2
20868
10434
Labour for hoisting plastic water storage tank.
Above 1500 litre upto 5000 litre capacity
Upto 5th story from G.L.
2
308
154
Labour for punching hole in plastic water storage tank upto 50 mm dia
6
114
19
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Single Socketed 3 Meter Length 110 mm
54
15768
292
Fittings Plain Tee (b) 110 mm
4
340
85
Door Tee 110 mm
8
1560
195
Bend 87.5
110 mm
16
1920
120
Door Bend (T.S.) 110 mm
4
588
147
Vent Cowl 110 mm
4
132
33
Pipe Clip
110 mm
20
420
21
125/110 P Trap with W.C. Ring 75 mm
4
1360
340
Supplying, fitting and fixing bib cock or stop cock. Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
7
4613
659
Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
2
1348
674
Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
8
6520
815
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 40 mm dia
2
3292
1646
25 mm dia
4
3648
912
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. (b) For Concealed Work. (i) CPVC Pipes Class-1, SDR-11 (Dia)
20 mm dia
35
5985
171
25 mm dia
14
3290
235
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc.
For Exposed Work PVC Pipes
25 mm
67
11859
177
For Exposed Work PVC Pipes
40 mm
30
8760
292
For Exposed Work PVC Pipes
50 mm
10
3840
384
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap
2
2842
1421
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.
E.W.C. Iv) Bestolite (Solid type) white
2
1430
715
Supplying, fitting and fixing shower of approved brand and make.
(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
1
452
452
Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
2
2502
1251
Supplying, fitting and fixing towel rail with two brackets. C.P. over brass 25 mm dia. and 600 mm long
6
2580
430
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
2
2030
1015
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.
i) Polythene Flush Pipe
2
310
155
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size
4
8832
2208
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. 450 mm X 300 mm
4
1468
367
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long
1
75
75
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete. 635 mm X 395 mm X 420 mm
1
2869
2869
Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately) 450 mm X 350 mm
1
881
881
Supplying, fitting and fixing liquid soap container. Cromium plated
8
3144
393
Supplying, fitting and fixing glass shelf with aluminium guard rails. Ordinary type with 5.5 mm sheet glass. 450 mm X 125 mm
4
1364
341
40 mm thick damp roof course with cement concrete (1:1.5:3) (With gradeded stone chips 20 mm nominal size) with water proofing compound of approved brand @0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementious waterproofing slurry coat complete [cost of under water proofing as per item no 9 and non toxic paints to be paid seperately] for retaining structures.
[water proofing as per item no 9 and non toxic paints as per item no, 8 (b) of subhead C of Section 'C'
43.39
11874
273.65
Add GST @ 18% on Rs.11483479.00 ove Item No. 1 to 75
11483479
2067026
18
Add Labour Welfare Cess @ 1% on Rs. 13550505.00 over Item No. 1 to 76
13550505
135505
1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements