Public Works Department Tender

c) Average Run- 10 Mtr

Do-----Do--- On Board

Supplying and fixing double door Horizontal 8 way TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Incomming-63A FPMCB Isolator, Outgoing-24 nos 16A-32A SP MCB) (Make-Legrand/Siemens/ABB/L&T)(Brand approved by EIC)(For connection of Split A.C & SPNDBs) (make- Legrand/Siemens/ABB/Schneider)

Supplying and fixing double-door (2+12way) SPN MCB Distribution Board with IP-42/43 protection, on angle iron frame on wall. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Incoming: 40 A DP MCB Isolator --- 1 nos. Outgoing: 6 - 16 A SP MCB --- 12 nos. (Make- Legrand/Schneider/Seimens/ABB)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required a) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC( from TPNDB to SPNDB)

b) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC ( from TPNDB to AC Point)

c) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (For power point& computer Point connection)

d) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC forfor 6A power point and beyond 9 mtr point wiring.

Supply & Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. i) 2X84/0.3(6 sq mm)+1X 56/0.3(4 sq mm)

ii) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm)

iii) 2X36/0.3 (2.5 sq mm)+ 1X22/0.3 (1.5 sq mm)

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 2 Module (for wall fans)

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 3 nos. 6 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch & 1 nos. 16 A, 3/5 pin Modular type plug socket with 1 nos. 16A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supplying & Fixing 240 V AC/DC superior type Multitune ( min 10 nos. tune) Call Bell (Anchor) with selector switch for single/Multi Tunes mode, Battery operated on HW board incl. S&F HW board

Supply of OLP-3, 25A is a highly advanced microprocessor controlled starter used for ACs and other compressor loads. The time-tested combination of Voltcheck, Ampcheck & Timecheck ensures safe operation and long life of AC Compressors. [Make: Electron/Ultratech/Ultrasafe] OLP-3, 25A Starter.

Supplying & Fixing GI Modular Switch Board of the following sizes incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 4 module GI modular box for housing the OLP starter.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supply and fixing 2+10 way double door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall embedded with following items. (Make-L&T/ Crabtree/ Legrand/ Siemens/ ABB) (a) Supply and fixing 240/415V 32A DP MCB of Breaking capacity 10KA & C characteristics on din rail of existing DBS and necy, connection--1 No. (b) S&F 3 pole power contactor with 230V coil voltage, following Ampere rating on din rail of existing DBS having the following model/cat no. 32A, 3 pole, Model:- MNX 32----1 No. (c) S&F 110-240VAC, 24 hours programmable digital Time Switch with minimum switching time of 15 minutes on din rail existing DBS (GIC/L&T) ---1 No. (d) S&F 110-240VAC, 2 position, Auto/ Manual bypass toggle/changeover switch on existing DBs by making suitable holes on the DBS---1 No. (e) S&F 110-240 VAC, 22.5 mm dia, LED Indicator on existing DBS by making suitable holes on DBS---1 No. (f) 32Amp Barrier type terminal---1 no. Interconnection to be done with 2x4 sqmm + 1x 2.5 sqmm copper wire 0.5 mtr including auto-Manual bypass arrangement with locking arrangement incl. making/cutting door of SPN DB for fixing arrangement of toggle switch, locking arrangement, LED indicator etc as required as per direction of EIC. (For 1.5 TR &2 TR single phase A.C. machine)

S&F of 36 watt, 230V, 6500K, 600X 600 LED Square type light fitting recess mounted, min 100lm/W, min 50000 burning hour, fully diffused fittings having surge protected driver complete set, below the ceiling with suitable size Gl chain supports fixed with "L" type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the fitting with suitable size of bolts and nuts incl. S&F "L" type MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and Painting etc. (Make Philips cat no-RC360B LED36S-4000/6500 V2 L60W60 PSU OD/ wipro/Crompton equivalent ) as per direction of EIC.

Supply & fixing of 12 watt, recess Round LED downlighter Fiting having 6500K LED, luminous efficienry not less than 80 Lm/watt Driver wattage should be greater than or eqal to the rated fiftings wattage incl. all accessories as required as per direction of ElC. [Make: Wipro-LD95-141-XXX-65-G1/Philips- Sigai$-DN 392B LED 10S-4000 PSD WH / Crompton- LSCRM-12W-CDL)

Supply & Fixing 450mm(18"), 1420 RPM full metal body cabin fan on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length (Make -EPC/Crompton ACVORTEX 18WM) as per direction of EIC.

Add: GST for works contract@18% on Item Sl. No. 1.00 to 21.00

Add: L.W.Cess @ 1 % on total