Public Works Department Tender

Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement concreat M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-in-Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete.

Supplying & laying in the specified pattern of interlocking concrete block pavement (ICBP) with concrete blocks (with concrete grade as specified as per table 1 of IS : 15658 : 2006) manufactured from BIS licence manufacturar, with spacer nib (Small producing profiles on the verticle face of a paver block used as a device for keeping mimimum jount gap in between the paving blocks as per Cl. No. 3.26 of IS : 15658) and of specified size and shape with aspect ratio (the ration of length to thickness of paver block, as per Cl. No. 3.3 of IS : 15658) as per table 2 of IS : 15868 with flexural strength / breaking loan as per Annexure G of IS : 15868, on the prepared base course of specified CBR as per table 1 of IRC SP 63 (2018) or else as metioned in design & drawing with a cushion of compected bedding sand of 25-35 mm thick ( grading of bedding sand as per clause 6.5.1. of IRC SP-63) and filling up the gap in between paver blocks with joint filling sand (the grading of joint filling sand will be as per clause 6.5.2. of IRC SP 63) and completing the edge with cut blocks as per Cl. No. 8.7 of IRC SP - 63 (2018) with proper confinment of bedding and joint filling sand, compaction, levelling and filling up of the edge gap. 60 mm thick (ii) Coloured Decorative

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - ii) Two coats (white in shade)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion