Public Works Department Tender

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Supplying and Laying in the specified pattern of Interlocking Concrete Block Pavements ICBP) with concrete blocks (with concrete grade as specified as per Table I of IS 15658:2006) manufactured in steel mould clamped to a vibrating table by hudraulic pressure (as per cl. no. 6.30 of IRC : SP : 63 (2018), from BIS licensee manufacturer, with spacer nib (Small protruding rofiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per Cl. No. 3.26 of IS: 15658) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block, as per Cl. No. 3.3 of IS: 5658 ) as per Table 2 of IS: 15658 with flexural strength/breaking load as per Annexure G of IS: 15658, on the prepared base course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm hick (grading of the bedding sand as per clause 6.5.1 of IRC SP- 63) and filling up the gaps in etween paver blocks with joint filling sand (the grading of the joint filling sand will be as per lause 6.5.2 of IRC SP 63) and completing the edges with cut blocks as per Cl. No. 8.7 of IRC SP 63 (2018) with proper confinement of bedding and joint filling sand, compaction, levelling and filling up of the edge gap. 50 mm thick.

Add : GST @18% (eighteen percent) on Rs.271208.00 i.e. Total Amount over item No. 1 to 5

Add : Labour Welfare Cess @ 1 % (one percent) on Rs.320025.00 i.e. Total amount after GST