Public Works Department Tender

Repairing pot-holes and making up small depressions with ramming or power rolling including screening, cleaning chips and washing, drying as necessary and heating the chips where necessary, cutting pot holes to regular shapes with vertical edges, cleaning the disintegrated materials,heating matrix and applying tack coat (including sides), finishing the top of repaired surface levelled with adjoining area, including cost and carriage of stone aggregates and matrix, ...... applying tack coat. i) With premixed Chips with 54 kg of bitumen per m3 of loose net volume of stone chips. (The payment is to be made on the basis of loose net volume of stone materials consumed in the work) With Pakur Variety Stone Chips, Bitumen VG - 30 (Packed) and Cationic Bituminous Emulsion-Packed(MS)] Using Mobile HMP (Light duty)

Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as,wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD. Using Pakur Variety stone aggregates.

Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) On Bituminous Surface (Using Bitumen Emulsion at the rate of 0.20 kg to 0.30 kg per sqm.) Using RS-1 Type packed bitumious emulsion.