Public Works Department Tender

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board complete with 3 nos suitable size copper bar with holes (for Ph,N & E) fixied on bakelite/Hard rubber insulator over the MS welded chairs and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

S/D following sizes PVC insulated & unsheathed Cu.wire in 19mm / 25mm / 32mm bore 3mm thick polythene pipe embedded in wall complete with all accessories incl. cutting the channel and mending good the damages incl. making connections as to G.S.:- [Make of Wires - Finolex / Havell's / RR Kable ]

a) 2 x 2.5 & 1 x 1.5 mm² for 15A Power plug

b) 2 x 4 & 1 x 2.5 mm² from PDB to Power Plug

Finishing the end of following sizes copper wire end / PVC cable/Al. with dowells solderless socket by crimping method as pre GS as follows :-

a) 2 x 2.5 & 1 x 1.5 mm² cu. Wire

b) 2 x 4 & 1 x 2.5 mm² cu. Wire

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing of 12'' Heavy Duty exaust fan with making hole complete with all accessories having the following Model / Cat No. ( Make -EPC Electrical Pvt. Ltd. ) Speed 1420 RPM with S/F 2 " Alumiuam louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

S & F 250V 25A Timer controller for AC machine in SS double door 2+10-way DB enclosure (Make:- L&T, encloser cat no DBSPN012DD) or equvalant) with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4 & 1x2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl necessary connections as per direction of EIC :- i) 10kA, C-Curve, 240V, 25A ,DPMCB (LT/Schnider/ABB Elegance) --- 1 No ii) 24 Hr programmable Digital/Analog Timer (LT make cat no 67DDT0) ---- 1 No iii) 3 pole power contractor (LT make cat no MNX 22/230V) with 1 NO +1 NC additional contact block ---- 1 set iv) 2 Moduler AC motor stater (Make:- Legrand/Myrius) ---- 1 No. v) 2 Module plate with cover (Make :- Legrand/Myrius) -- 1 No vi) 20A Auto-Off-Bipass SPDT toggle switch (Approved/reputed make) ---- 1 No. vii) 10A SPST Moduler type switch (Make :- Legrand/Myrius) - 1 No. viii)Outgoing connector make ELMAX (Approved/reputed make) - 1 No.

S&D of minimum 2.0 Tr Capacity ceiling suspended [concealed] Split Air Conditioner with R410A / R407C / R-32 Refrigerant, with Rotary / Twin Rotary Compressor with minimum Cooling Capacity not less than 7.05 KW, Air Flow not less than 640 CFM, Moisture Removal should be 2.5 I/hr, EER not less than 2.65 KW/KW, Minimum cu. pipe Length from ODU to IDU not less than 25 MTR & suitable for operation on 230V,+_ 5% , 50Hz, 1Ph AC Supply. with precharged refrigerant, Wired/ Wireless remote & all other accessories complete with refrigerent (Make : Mitsubishi heavy industries / O General (Model No. : ARG25F/AOG25F) / Daikin ).

Installation, testing & Commissioning 2.0 Tr Concealed Split type AC Machine with all accessories i.e., fastner, nut bolt, wall cutting, all glass window/grill cutting where needed with S&F heavy gauge ODU iron brecket, IDU tie rod etc. incl. mending good damages as per direction of EIC.

Supply & fixing of HVAC grade copper pipe (0.9 mm min.) with minimum thickness 9 mm Nitril Rubber insulation of following sizes for liquid and gas line between ODU and IDU (Make - Ryoku/Nippon):-

5/8" (gas line / suction).

1/4" (liquid line/ discharge line).

Supply, installation & commissioning PVC Drain pipe line (25mm OD HD 1mm thick) with Class O fire rated nitrile rubber insulation & supports & brackets (For 2.0 Tr concealed split AC).

S&D of Daily Weekly Programmable Electronic 110 240 VAC Crono Timer Switch, 50/60 Hz, 1 C/O SPDT Cat. No. : 67DDT0 (Black) [for AC m/c timer DB]. [Make- L&T or equivalent].

S&D of Programmable Electronic time switch for Toilet Exhaust Fan as per direction of EIC. [Make- GIC, Cat No. V7DFTS3, Model or equivalent].

Supply and fixing of air curtain made of CRCA sheet fabricated with pure polyester powder coating paint body suitable for 68 inch wide door consisting of 1no motor with 2 nos blower suitable to run with 230V/ 50 Hz /1 phase power supply. [Makes - Airotek / Techno mech sales].

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC