Public Works Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Jan 2025
Closing Date8 Feb 2025
Tender Amount₹ 1,37,62,879
Costs
EMD
₹ 2,75,258Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Repair And Renovation Work Of Emergency Observation Ward At Ground Floor Of Bidhan Block To Convert Casualty Ward, Within Midnapore Medical College And Hospital
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WBPWD_799892_1Tender No
WBPWD/SE/SWC/NIeT-9(2)/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://wbpwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Additional_Performance_Security
BOQ Items
... More
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor ncluding removing rubbish within a lead of 75m as directed.
4226.87
19
80311
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and ranite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be upplied by the Agency]
(b) With Chawk Dungri
(i) Area of each tile upto 0.3 sq.m.
536.17
1610
863325
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & olishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
140.88
995
140236
... More
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 5622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineer in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer)
(a) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick)
1551.69
1560
2420807
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative
105.03
728
76507
... More
(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative
3791.9
1088
4127218
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] i) With 1:6 cement mortar (b) 20 mm thick plaster
372.78
151
56562
... More
(c) 15 mm thick plaster
181.5
133
24239
... More
(ii) With 1:4 cement mortar (c) 10 mm thick plaster
62.19
120
7497
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes
a) Pakur Variety
32.98
5168
170470
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
24.84
344
8545
... More
White washing including cleaning and smoothening surface thoroughly.
All floors :
(b) Two coats (to be done on specific instruction).
391.68
1814
7105
... More
Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving istemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge).
3618.07
1009
36506
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
4053.04
110
445834
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer
4053.04
3080
124834
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality
4053.04
62
251288
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm.
5.15
11927
614
... More
Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth
3.71
5095
18903
... More
(b) In superstructure, ground floor
16.88
5317
89752
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor
59.52
697
41515
... More
(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety] (a) 1:3:6 proportion
3.45
5079
17524
... More
Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)
(a) Upto area 2.5 Sq.m
36.18
119
4305
... More
(b) Above area 2.5 Sq.m
61.95
146
9045
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(d) Sal : Local.
0.76
72954
55591
... More
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..
(i) 66mm x 90mm
49.5
497
24602
... More
Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.
In ground floor.
(In case of non-supply of single plank, penal rate of reduction of 20% will be made)
(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.
(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
Ground Floor
24.72
2789
68944
... More
Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately.
(ii) 35mm thick shutters.
(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
In ground floor.
10.56
2642
27900
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings.
(a) 35 mm thick shutters (single leaf)
In ground floor.
8.8
2659
23399
... More
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.
In ground floor.
(i) 32 mm thick
14
2763
38682
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
(a) 40mm X 6mm, 250mm Length
Ground Floor
132
29
3828
... More
(b) 40mm X 6mm, 200mm Length
120
25
3000
... More
Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only).
Ground Floor
51.18
126
6449
... More
Styles and rails of wooden shutters fitted and fixed complete. (Payment to be made on area of new work only). In Ground Floor:
(ii) 35mm Thick shutter.
(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
9.81
2178
21366
... More
Panel (made of single plank) of door and window shutters to design as directed: In Ground Floor
(Payment to be made on area of exposed new work). (In case of non-supply of single plank penal rate of reduction to a maximum of 30% will be made).
(ii) 19mm thick panel of 30cm to 45cm width
(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
11.04
1118
12343
... More
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)
(i) 3 mm thick (weighing 7.4 kg/Sq.m)
9.75
477
4651
... More
Repairing steel shutter with new rivets including taking out and refixing, adjusting, welding, cleaning cutting holes, mending good damage to match with the existing one.
73.71
401
29558
... More
Renewing M.S. members of steel shutters by welding including taking out the old, mending good damages complete, including taking out and refixing the glass panes.
179.1
211
37790
... More
Easing, oiling and adjusting the steel shutters including scraping all members and fitting so as to make the shutters easily operable (no extra payment will be made for taking out and fixing glass, if necessary).
53
42
2226
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor)
(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
6.83
9888
67525
... More
(ii) Grill weighing above 16 Kg./sq.mtr and above
13.32
9696
129151
... More
Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens).
In ground floor.
(d) 75mm x 50mm x 4.5mm x 3.0mm.
42.68
233
9944
... More
(e) 75mm x 50mm x 2.7mm x 2.7mm.
23.4
230
5382
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
(vi) 100mm. X 50mm. X 1.25mm.
152
43
6536
... More
(vii) 100mm. X 58mm. X 1.90mm.
144
47
6768
... More
Iron socket bolt of approved quality fitted and fixed complete.
(c) 150mm long x 10mm dia bolt.
46
63
2898
... More
(d) 225mm long x 10mm dia bolt.
68
77
5236
... More
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
(c) 300mm long.
34
166
5644
... More
(A) Iron door ring of approved quality fitted and fixed with nut and washer complete.
(i) 50mm dia.
46
17
782
... More
(ii) 75mm dia.
96
28
2688
... More
Iron skeleton bolt of approved quality fitted and fixed complete.
(a) 375mm long x 10mm dia rod.
5
92
460
... More
(b) 450mm long x 10mm dia rod.
5
104
520
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).
(A) In 10-12 Micron thickness Annodizing film
I) Natural white
a) 2- track sliding window
i) Bottom frame
14
218
3052
... More
ii) Top and side frame.
45.2
195
8814
... More
b) 3- track sliding window
i) Bottom frame
18
311
5598
... More
ii) Top and side frame.
44
270
11880
... More
d) Shutter for all track sliding window.
i) Bottom & Top member.
61.3
117
7172
... More
ii) Style side member.
55
119
6545
... More
iii) Interlock member.
80
148
11840
... More
i) Fixed partitions.
(Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.)
i) Top , bottom & side member.
75.6
321
24268
... More
ii) Intermediate member.
151.2
339
51257
... More
iii) Glazing clip.
750
50
37500
... More
k) Movable door shutter.
i) Door frame. (Top & sides).
111.4
315
35091
... More
ii) Shutter :
Top rail.
19.02
304
5782
... More
Bottom rail.
19.02
448
8521
... More
Lock rail.
19.02
377
7171
... More
Door vertical.
83.6
332
27755
... More
Glazing clip.
282.4
50
14120
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC.
The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
i ) 2 track sliding window.
18.72
696
13029
... More
ii ) 3 /4 track sliding window.
23.4
941
22019
... More
(B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge.
The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. (10% rate reduction has to be made for swing doors or partitions where floor sping is not used. 10% enhancement of rate is to be made where door frame of extruded aluminium sections has to be fitted and fixed to masonry wall. 5% rate enhencement may be allowed for double leaf swing door. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration.Payment for door frame sections are to be paid seperately).
43.2
1281
55339
... More
(D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge.
The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, fastener but excluding the cost of extruded aluminium sections, EPDM gasket, glass, board, glazing clips, locking arrangement, etc.
I) For partitions using section of size:
b) 101.50mm x 44.45 mm
59.4
890
52866
... More
Supplying PVC rollers for sliding windows as per direction of Engineer in charge.
108
14
1512
... More
Supplying maruti lock (100mm)
25
46
1150
... More
Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.
i) For sliding windows
a) ' T' shaped EPDM gasket for frames.
608.8
13
7914
... More
b) 'U' shaped EPDM gasket for frames.
196.3
15
2945
... More
iii) weather gasket / wool pile for door vertical.
41.8
19
794
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
iii) 5mm thick clear glass.
75.83
526
39887
... More
Providing, fitting and fixing in position, medium density fibre board conforming to IS: 12406-1988 for plain and IS: 14587-1998 for prelaminated made of wood fibre bonded with Urea formaldehyde for interior grade and Phenol Formaldehyde for exterior grade conforming to per IS:848-1974 as per approved make and brand as per direction of Engineer-in-Charge.
In Ground Floor
(A) Plain :
(b) Interior grade.
(i) 6mm
49.21
677
33315
... More
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
(x) 150 x 75 x 4.0mm.
66
133
8778
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
(a) With continuous plate base (Hexagonal/ Round rod)
(iii) 100 mm grip x 12 mm dia rod.
84
85
7140
... More
Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.
(i) 250mm x 16mm dia bolt.
22
233
5126
... More
ii) Godrej Hydraulic door closer fitted and fixed complete.
(b) Medium type
12
1665
19980
... More
Supplying, fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs.
b) with 75mm iron Butt-hinge
iii) Local Sal.
50
35
1750
... More
(i) Door stopper.(Brass)
35
117
4095
... More
Wood work in beams and burgahs fitted and fixed in position complete. (Cost for repairing of Damage to be paid separately)
(iii) Local Sal.
0.05
63237
3162
... More
Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge
82.48
166
13692
... More
Cutting holes and subsequent mending good damages.
(b) Diameter exceeding 150 mm. but not exceeding 300 mm.
(i) In brick work [Cement-6.0 Kg/Mtr]
6.25
152
950
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
(i) Pakur Variety
2.21
5666
12496
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
(a) For works in foundation and upto roof of ground floor/upto 4 m
II. Other than
SAIL/ TATA/RINL
0.17
55149
9541
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof)
(f) 25 mm to 30 mm shuttering without staging in foundation
8.4
203
1705
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
181.5
32
5946
... More
Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position
with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.
(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor.
18.48
4330
80018
... More
Welding in M.S. structural work with gas or electric:
(a) Tack weld
3000
9
27000
... More
Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coats.
11.87
379
4499
... More
Easing and oiling, cleaning collapsible gate and repairing to locking arrangements.
11.87
17
202
... More
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials
4.2
1304
5477
... More
M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc.
(length of straight not less than 230 mm)
0.63
9984
6270
... More
Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol ormaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping]
In Ground Floor
(iv) 12mm
9
1290
11610
... More
Supplying, fitting, fixing bolts with nuts, washer:
(i) 10 to 16 mm dia:
(a) Length up to 75 mm
1.33
157
209
... More
(i) 10 to 16 mm dia:
(b) Length above 75 mm and upto 150 mm.
1.67
146
244
... More
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality ncluding smoothening surfaces by sand papering etc.
182.47
29
5292
... More
(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
191.28
38
7269
... More
A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
(a) On timber or plastered surface :
With super gloss (hi-gloss) -
iii) One coat (with any shade except white)
Bidhan Block G.F.
436.33
54
23562
... More
(iv) Two coats (with any shade except white)
191.28
81
15494
... More
(b) On steel or other metal surface :
With super gloss (hi-gloss) -
(ii) Two coats (white in shade)
201.86
79
15947
... More
Sanitary & Plumbing Works
Labour for dismantling G.I. pipe with fittings. (i) 15 mm
144.6
6
868
... More
(iii) 25 mm
126
6
756
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
33
1015
33495
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
(i) 550 mm X 400 mm size
10
2208
22080
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.
(a) Sink only
(i) 530 mm X 430 mm x 180 mm
7
3285
22995
... More
(ii) 630 mm X 550 mm X 180 mm
5
3788
18940
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
(ii) 450 mm long
35
82
2870
... More
(iii) 600 mm long
25
107
2675
... More
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.
(iv) 1050 mm long
35
91
3185
... More
Supplying,fitting and fixing rubber plug.
(i) 45 mm dia.
25
15
375
... More
Supplying, fitting and fixing Waste fittings complete. (a) C.P. over brass
(ii) 32 mm
42
190
7980
... More
Supplying, fitting and fixing pillar cock of approved make.
a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand).
8
555
4440
... More
f) (i) CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand).
18
1058
19044
... More
Dismantling wash basin with brackets with or without waste fittings
20
35
700
... More
Refixing wash basin with brackets with or without waste fittings.
10
70
700
... More
Dismantling sink with brackets with or without waste fittings.
(ii) Above 450 mm and upto 600 mm length
18
52
936
... More
Refixing sink with brackets with or without waste fittings.
(ii) Above 450 mm and upto 600 mm length
18
76
1368
... More
Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) 'P' Trap (iii) 100 mm
9
948
8532
... More
Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/2009 and 1729/2002 including lead caulked joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (a) (i) 100 mm X 150 mm
9
461
4149
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(A) (i) Single Socketed 3 Meter Length
(b) 110 mm
42
292
12264
... More
(ii) Double Socketed 3 Meter Length
b) 110 mm
24
315
7560
... More
(B) Fittings (i) Coupler (b) 110 mm
18
85
1530
... More
(ii) Plain Tee
(b) 110 mm
14
85
1190
... More
(iii) Door Tee (b) 110 mm
15
195
2925
... More
x) Bend 87.5º (b) 110 mm
22
120
2640
... More
xv) Vent Cowl (b) 110 mm
10
33
330
... More
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials.
(B) Under ground (ii) 110 mm dia
66
84
5544
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.
(a) With 'P' trap
14
1421
19894
... More
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).
(i) 580 mm X 440 mm
8
1613
12904
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
(iii) Corner urinal 440 mm X 345 mm X 250 mm
2
1167
2334
... More
Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).
(i) 600 mm X 100 mm
(b) White vitreous chinaware
16
466
7456
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.
(a) E.W.C. (iv) Bestolite (solid type) white
19
715
13585
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe
9
155
1395
... More
Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent)
20
135
2700
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
15
613
9195
... More
Supplying, fitting and fixing towel rail with two brackets.
(a) C.P. over brass
8
384
3072
... More
(ii) 25 mm dia. and 600 mm long
10
430
4300
... More
Dismantling Indian W.C. including taking out base concrete as necessary
14
45
630
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
i) With Pakur variety. (SAIL/TATA/RINL)
15
6875
103130
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,PartI.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
(iii) For 30 users A) With Pakur variety. (SAIL/TATA/RINL)
2
59878
119757
... More
(iv) For 50 users A) With Pakur variety. (SAIL/TATA/RINL)
2
86330
172661
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
(SAIL/TATA/RINL
4
15977
63910
... More
Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.
(b) Upto 30 users:
(ii) Beyond a lead of 150 metre and outside the Municipal limit
3
2950
8850
... More
(c) Upto 50 users:
(ii) Beyond a lead of 150 metre and outside the Municipal limit
3
3303
9909
... More
Dismantling & Refixing pit cover
15
35
525
... More
Cleaning silt of inspection pit.
15
154
2310
... More
Cutting hole through wall, roof or cornice and mending good all damages
18
68
1224
... More
Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from road side masonary drain/ hume pipe drain/ culvert etc. by mathor labour after removing concrete.Slab/manhole cover etc.without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal/corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineerin-Charge.
(Payment will be made on the basis of actual stack measurment of spoils in dry condition at roadside
7.98
289
2306
... More
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(A) For Exposed Work (a) (ii) 15 mm dia. medium quality
15
192
2880
... More
(b) (ii) 20 mm dia. medium quality
11.3
226
2554
... More
(c) (ii) 25 mm dia. medium quality
25
305
7625
... More
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (vii) 25 mm dia
7
912
6384
... More
(viii) 20 mm dia
6
657
3942
... More
Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
20
539
10780
... More
(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm
76
154
11704
... More
Supplying, fitting and fixing shower of approved brand and make.
(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
8
1251
10008
... More
(g) PTMT overhead shower ( Prayag or equivalent) (i) 75 mm round
16
179
2864
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(a) For Exposed Work PVC Pipes
15 mm (Dia)
150
101
15150
... More
20 mm Dia (Left & Right Side)
150
129
19350
... More
25 mm Dia
210
177
37170
... More
32 mm Dia
104
236
24544
... More
Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] A. 6 Kg / Sq.Cm. (Working Pressure) 40 mm (Dia)
80
72
5760
... More
50mm Dia (Left & Right Side)
80
110
8800
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (B) Socket 40 mm (Dia)
30
42
1260
... More
50 mm (Dia) Left & Right Side
24
53
1272
... More
(C) Elbow 40 mm (Dia)
30
69
2070
... More
50 mm (Dia) Left & Right Side
30
113
3390
... More
(E) Tee 40 mm (Dia)
20
99
1980
... More
50 mm (Dia) Left & Right Side
20
125
2500
... More
Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. )
(v) 40 mm dia
Above Ground
80
37
2960
... More
(vi) 50 mm dia (Left & Right Side)
80
40
3200
... More
(A) Labour for fitting and fixing G.I. pipes above ground (exposed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately)
(i) 15 mm dia.
20
46
920
... More
(ii) 25 mm dia Left & Right Side
16
54
864
... More
Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 (G) End Cap 15 mm dia
8
6
48
... More
20 mm dia
10
9
90
... More
25 mm dia
10
14
140
... More
32 mm dia
10
26
260
... More
(I) Tank connecting nipple 25 mm dia
4
115
460
... More
32 mm dia
3
166
498
... More
(J) Male threaded adopter
15 mm dia
30
11
330
... More
20 mm dia
24
15
360
... More
25 mm dia
20
25
500
... More
32 mm dia
10
52
520
... More
(Q) Ball Valve
15 mm dia
16
99
1584
... More
20 mm dia
20
152
3040
... More
25 mm dia
32
239
7648
... More
32 mm dia
10
399
3990
... More
(R) Female threaded adopter
15 mm dia
10
11
110
... More
20 mm dia
10
19
190
... More
25 mm dia
16
26
416
... More
32 mm dia
8
47
376
... More
(U) Male threaded adopter (Brass threaded) 15 mm dia
16
104
1664
... More
20 mm dia
16
118
1888
... More
25 mm dia
20
251
5020
... More
32 mm dia
8
433
3464
... More
(V) Female threaded adopter (Brass threaded) 15 mm dia
32
101
3232
... More
20 mm Dia (Left & Right Side)
24
181
4344
... More
25 mm dia (Left & Right Side)
10
292
2920
... More
32 mm dia (Left & Right Side)
6
525
3150
... More
(W) Female Elbow (Brass threaded) 15 mm dia
20
65
1300
... More
(X) Male Elbow
(Brass threaded) 15 mm dia
20
74
1480
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
(d) 2000 litre capacit
5
10434
52170
... More
Labour for hoisting plastic water storage tank.
(ii) Above 1500 litre upto 5000 litre capacity.
5
226
1130
... More
Labour for lowering plastic water storage tank and stacking in places as directed.
(ii) Above 1500 litre upto 5000 litre capacity
5
138
690
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia.
25
19
475
... More
Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir.
15
155
2325
... More
Dismantling G.I. tank including disconnecting pipe connection.
5
115
575
... More
Fixing G.I. tank in position including refitting pipe connection.
5
115
575
... More
Add GST @ 18% on Rs. 11547977.00 i.e. total amount over item No. 1 to 124
11547977
18
2078636
... More
Add Labour Welfare Cess @ 1% on Rs. 13626613.00 i.e. Total amount over item No. 1 to 125 plus 18%GST amount
13626613
1
136266
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%