Public Works Department Tender

Supplying and laying in the specified pattern of Interlocking Concrete Block Pavement (ICBP) with concrete blocks (with concrete grade as specified as per Table 1 of IS 15658:2006) manufactured in steel mould clamped to a vibrating table by hydraulic pressure (as per cl no. 6.30 of IRC : SP: 63(2018) from BIS license manufacturer with spacer nib (small producing profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks as per cl. no.3.26 of IS:156358) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block as per cl. no. 3.3 of IS:15658 ) as per table 2 of IS:15658 with flexural strength/breaking load as per annexure G of IS: 15658 on the prepared base course of specified CBR as per table 1 of IRC SP63 (2018)or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35mm thick (grading of the bedding sand as per clause6.5.1 of IRC:SP-63) and filling up the gaps in between paver blocks with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of I(RC SP 63) and completing the edges with cut blocks as per cl no 8.7 of IRC SP-63(2018) with proper confinement of bedding and joint filling sand compaction, levelling and filling up of the edge gap 50 mm thick. Coloured Decorative

Brick edging 75 mm wide with picked jhama bricks, laid true to line and level including cutting necessary trench in soil or in hard metalled surface, laying the bricks and repacking the trench (on both side of the edging) with spoils and ramming the same thoroughly complete as per direction. (a) Brick-on-edge edging (125 mm) depth.

Add : GST @18% (Eighteen Percent) on Rs.4,18,856.00 i.e. Total Amount over item No. 1 to 5

Add : Labour Welfare Cess @ 1 % (One Percent) on Rs.4,94,250.00 i.e. Total amount after GST over item No. 1 to 6