Public Works Department Tender

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor / upto 4m. (i) Tor steel/Mild steel JSW/ JSPL/ SHYAM/ SRMB/ BMAS/ ELECTROSTEEL/ SSL

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).With 1:6 cement mortar; (b) 15 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m Same asd plaster

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. For roof truss span above 12.00 mtr.For roof truss works a) Span up to 12 Mtr

Supplying,fitting,fixing bolts with nuts,washer: 10 to 16 mm dia bolt: Length above75 mm and upto 150 mm.

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed 20 mm dia bolt. (a) 450 mm long

Supplying, fitting & fixing single scheme coloured coated trepezoidal profile in wall cladding , roof shall be made of 0.45mm BMT (Base metal thickness) 0.5mm TCT )Total Coated Thickness) excluding paint G550 (minimum 550 yield strength) of zincalume material coating IS 15965 with high solar reflectance index (SRI) value for better cooling as per thermotechnology 1000-1015mm effectiv cover width with five major corogation ,28 mm high rib spaced at 2032 mm c/c with subtle square fluting in the pan and the end rib shall have anti- capillary groove and return leg. the steel sheet shall be fastened with 40 micron zinc coated or 25 mm micron zinc-tin-alloy coated , hex head ,self drilling screw as per IS 3566-2002 class-3 fastner. The base sheet shall be coated witrh Zinc alluminium alloy Zincalume (AZ150) (i.e. 55% Al,43.4%Zn,1.6%SI) minium 150g/m2 coating total on both sides, pre fabricated with colour bond XRW ( exterior roofing walling ) paint system of 35 micron Super Durable Polyester paint (SDP) with stable inorganic pigment with no lead contents conforming IS15965 . The sheet shall be free from defects and have brand marking of the manufacturer giving product details on the back of the sheet at regular interval conforming genuinity of the material. In Roof:- a) With 0.5 mm thick sheet

Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping) .(A) 300 mm lapping each way With 0.71 mm sheet

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc .

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(iv) On steel or other metal surface :Two coats (with any shade except white)With super gloss (hi-gloss

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One coat Ground floor Quantity same as plater(outside)

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. b) Premium 100% Acrylic Emulsion Two coats Grounds floor

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length160 mm

Total Amount

GST @ 18%

Cess @ 1%