Public Works Department Tender

Repairing pot-holes and making up small depressions with ramming or power rolling including screening cleaning chips or metals and washing, drying as necessary and heating the chips or metal where necessary, cutting pot holes to regular shapes with vertical edges, cleaning the disintegrated materials, heating matrix and applying tack coat finishing the top of repaired surface levelled with adjoining area, including cost and carriage of stone aggregates and matrix, excluding cost of applying tack coat. (i) Using premixed chips or Bazree (a) With suitable pan

It-5.11/P-257 (Roads) Providing laying and rolling of open graded premix surface of 20 mm thickness composed of 13.20 mm and 11.20 mm size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre coating the smae either using viscosity grade paving bitumen or cut back or emulsion, carrying the mixture by any suitable arrangements, laying the mixutre uniformly over the surface, including line, grade and level ot serve as wearing course on a previously prepared base,including mixing in mobile Hot mix plant (Light duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips amd matrix heating the matrix, preheating the aggregates to required tempature and including the hire charges of mobile hot mix palnt and other machirery pay of operators, cost of fuel and lubricants etc complete to be followed by seal coat of either Type A or Type B as per technical specification cluse 508 for rural roads of MORD.

Providing and laying Premixed seal coat (Type B) with approved quality sand / grit @ 0.60 m3 / 100 m2 and bitumen binder on thoroughly cleaned black top surface cleaned with tack coat including heating and mixing cleaned sand / grit uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary to ensure uniformly followed by rolling with power roller including the cost and carriage of binder and aggregates cost of heating the binder and aggregates and all other incidential charges cost of fuel and lubricants including hire charges of machineries, tools & plants required for construction and quality control complete as per clause 511 pf specification for Road & Bridge works of MORT&H (5th Revision) ii) By manual means with hot bitumen binder ( @ 6.80 kg / 10 sqm) Using stone dust mixed with grit & VG 30 Bitumen

G.S.T. @ 18%

Labour Welfare Cess @ 1%