Public Works Department Tender

Supply ,Fitting & Fixing of Marvel Visitor Chair The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.*Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette.Tabular frame is cantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thkS.S 202 tube.The back connected to frame through chrome plated high pressure die cast connector piece.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Finnesse Table-563 (1650 x 900 x 740) + Finnesse ERU-5216 (1550 x 450 x 705)+Pedestal .Finesse Table - 5630 size shall be 1650 Width mm x 900 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Finesse ERU -5216 LHS size shall be 1550 Width x 450 Depth x 705 Height. The top of Finesse ERU -5216 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.The quoted product should be from a certified member of The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Finnesse Back Unit as per approved drawing & design / specification of EIC .Finesse HDU - 4315 size shall be 1280 Width x 425 Depth x 705 Height. Top of Finesse HDU - 4315 shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.The quoted product should be from a certified member of BIFMA(Certificate to be enclosed) and should be following managment systems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007 ,AIOTA, Greenguard Certification(Certificate to be enclosed) procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Versa Neo High Back Chair,Providing, supplying and placing of High Back Chair.SEAT/BACK ASSEMBLY: The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The stitched cover should be made from spacer fabric and leatherette. Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with spacer fabric and leatherette. SeatSIZE : 47.0cm.(W)x48.0cm. (D) . BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with spacer fabric and leatherette. BACK SIZE : 45 cm. (W) x 75.5 cm. (D) ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk MS E.R.W tube. The armrest height adjustable up to 6.5±0.5cm in 5 steps.The Armrest structure should be powder coated (DFT 40-60 micron). ACTIVE BIO-SYNCHRO mechanism : The adjustable tilting mechanism should be designed with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORTBack Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PNEUMATIC HT. ADJUSTMENT : The pedestal is injection moulded in black 33% glass-filled Nylon 66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.1±0.5cm. pitch-center dia.(76.1±1.0 cm. With castors.) TWIN WHEEL CASTOR : 5 Nos. twin wheel castors should be injection moulded in plastic having 6.0±0.1cm wheel Diameter and assembled to pedestal. Overall Dimensions of Chair Seat Height - 44.4-54.4cm. Height - 113.6-131.1cm. Width-76.1 cm and Depth-76.1 cm

Supply ,Fitting & Fixing of Versa Neo Visitor Chair Providing, supplying and placing of Visitor Chair. SEAT/BACK ASSEMBLY: The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The stitched cover should be made from spacer fabric and leatherette. Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with spacer fabric and leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK SIZE : 45 cm. (W) x 60.5 cm. (D) Visitor TUBULAR FRAME: The powder coated (DFT 40-60 micron) tubular frame should be cantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube.The back connected to frame through powder coated (DFT 40-60 micron) high pressure die cast connector piece. Overall Dimensions of Chair Seat Height - 44.8cm. Height - 99.5cm. Width-60.9 cm and Depth-64.3 cm

Supply ,Fitting & Fixing of Mayfair Main Desk (1200W x 600D x 750H) + ERU (900 x 450 x 750) + Pedestal (390 x 435 x 529) .Mayfair Main Desk size shall be 1200 Width x 600 Depth x 750 Height.The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT.The Modesty panel shall be in a combination of black & white cedar.The quoted product should be from a certified member of BIFMA(Certificate to be enclosed) and should be following managment systems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007 ,AIOTA, Greenguard Certification(Certificate to be enclosed) procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Bravo High Back Chair,The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area BACK SIZE 47.5 cm. (W) x58.0 cm (H).SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. The one-piece armrests should be injection moulded from black Co-polymer Polypropylene The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. The bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors).The twin wheel castors should be injection moulded in Black Nylon. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Bravo Visitor Chair, The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured & upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 58.0 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. Overall Dimensions of Chair shall be Seat Height - 46.5cm, Height - 89.5cm, Width & Depth of Chair as measured from pedestal - Width-61.4 cm and Depth-64.5 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Storwel Plain (1981H x 916W x 486D), Overall size Shall be 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Wish Workstation (1200W x 6000D) with Pedestal+KBPT+CPU Trolly Wish WS TABLE TOP AND 1200HT PARTITION (variation uptom +_ 10%) Partition system shall be such that it is elevated from ground (upto 110 mm) for air circulation and ease of maintenance. The partition thickness shall be 52mm. The extrusions shall be made of aluminium having materials AL96063-T6 and have average wall thickness of 1.2 mm Coated with average 50 to 60 micron thickness of epoxy powder coating at every division of tile/block. Tiles shall have 4 divisions each having 270mm, with hollow tiles on top and bottom levels, and 2 blocks made out of a composite construction of MDF and 38mm thick paper honeycomb at the centre. Frame shall have a bottom frame assembly made up of L-channels- 2mm thick CRCA steel (IS: 513), formed plates of 3mm thick HR steel (IS: 2062) &ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together and should be Coated with average 50 to 60 micron thickness of epoxy powder coating. This shall be connected to uprights and panel leg. Panel leg shall be fabricated by CO2 welded MS Tube. There shall be leg assemblies to support worktop which shall be fabricated by CO2 welded MS Tube. The blocks and metal frame shall be held together by verticals at both ends, made up of aluminium extrusion and avg wall thickness of 1.2mm. The trims shall be made up of aluminium extrusion and avg wall thickness of 1.2mm. The middle blocks shall have decorative laminates on both sides. The bottom tiles shall be in plain metal on both sides and shall be press fitted onto the assembly frame pf the panel with the help of snap on clips. The top tiles shall be slided into the panels from top before fixing with the top horizontal and may have finishes like whiteboard, fabric, fabric magnetic. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Thril Mesh Chair, Providing, supplying and placing of Mid Back Chair. SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 101.5 - 111.0 CM. SEAT HEIGHT (SH): 44.5 - 54.0 CM. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Mayfair Main Desk (1350 x 750 x 750), ERU (1200 x 450 x 750) with Pedestal The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT.The Modesty panel shall be in a combination of black & white cedar.The quoted product should be from a certified member of BIFMA(Certificate to be enclosed) and should be following managment systems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007 ,AIOTA, Greenguard Certification(Certificate to be enclosed) procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Beat High Back Chair Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured. upholstered with knitted fabric , over moulded High Resilience Polyurethane foam HIGH BACK SIZE: 51.8 cm. (W) x 75.2 cm. (H) SEAT SIZE : 49.0 cm. (W) x 48.8 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features: • Up-Down adjustment– 8 steps (8.0±0.5 cm range) • Height adjustable armrest structure which is powder coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2 . BACK HEIGHT ADJUSTABILITY: Back can be adjusted in 5 positions by manually. Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for High back and Mid back chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. PEDESTAL ASSEMBLY WITH CASTORS: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-centre dia is Ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. with castors) . TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. OPTION OF SLIDING SEAT MECHANISM: Seat can be slide horizontally as per user convenience. Stroke of seat slide is 5 cm. This option is available for revolving pedestal type of chair. Overall Dimensions of Chair Seat Height - min 45.0 to max 55.0cm. Height - min 102.0 to max 119.0 cm. Width & Depth of Chair as measured from pedestal - Width-76.1 cm and Depth-76.1 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Beat Visitor Chair Providing, supplying and placing of Visitor Chair. SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured. upholstered with knitted fabric , over moulded High Resilience Polyurethane foam. MID BACK SIZE : 51.6 cm(W) x 65.7 cm. (H). SEAT SIZE : 49.0 cm. (W) x 48.08 cm. (D). TUBULAR VISITOR FRAME (Visitor Chair): The tubular frame is powder coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly. Overall Dimensions of Chair Seat Height - 47.0cm. Height - 100.8 cm. Width & Depth of Chair as measured from pedestal - Width-57.5 cm and Depth- 58.2 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of T 31 Table (900W X 590D X 750H) Worksurface The panels are made from 18+-0.5 mm thick Pre Laminated boards as per with 2mm thick PVC edge banding on all sides.C frame made from 0.9 +-0.09 mm thick powder coated 50 microns(+-10) CRCA MS.Made from 1.0+-0.09 mm thick powder coated 50 microns(+-10) CRCA MS.Shell 0.5 +-0.07 mm thick CRCA MS.Drawer Tray :0.5 +-0.07 mm,Drawer Front : 0.8 +-0.1 mm thk CRCA MS.Lock: 10 Lever Cam Lock.Handle Built in Plastic. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of 7046R Chair The seat and back shall be made from 1.2 ±0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm(W) x 42.0cm.(D) and of back shall be 40.0cm(W) x 47.0cm.(H). The seat and back covers shall be injection moulded in black Co-polymer Polypropylene. The HR polyurethane foam shall be moulded with density.=45±2.kg/m3 and hardness load 16±2 kgf as per IS:7888.for 25% compression. The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 em. thk. HR steel. The permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.0 to max 54.0cm, Height - min87.5 to max 98.5cm, Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm.The quoted product should be from a certified member of BIFMA(Certificate to be enclosed) and should be following managment systems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007 ,AIOTA, Greenguard Certification(Certificate to be enclosed) procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Supreme 3 Seater Sofa Providing, Overall Size :Width : 181m Depth : 78cm Height : 81.5cm Seating Height : 38cmUpholstery:Material : PVC .Shade : Black ,Thickness : 1 mm ,Weight (GSM) : 575 ,Tear strength (kg/5cm) : wrap : 34.1 weft : 19.78 ,Breaking strength (Kg/cm2): wrap : 3.92 Kg weft : 2.59 Kg ,Adhesion of coating kgf/5cm : warp : 3.05 Kg weft : 3.02 Kg , Colour Fastness to Rubbing (Dry/Wet) (scale 1-5) : Dry = 3 Wet = 3 Frame :Material : Pine Wood , Moisture content : 10 -12 % ,Thickness of Plywood used : 12 mm & 18 mmSeat Foam :Material : Slab stock ,Density : 32 kg/m3 at seat and 28 kg/m3 at backWebbing : Material : Nylon Thickness : 2 mmLegs Material : PVC with 4 mm bush. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Dual Center Table Providing, Supplying and Placing of Coffee table Overall Size : W x D x H - 904 x 444 x 411mm. 1. Body: All panels are made of 18mm Prelaminated Particle Board, with all exposed edges having 2mm thick PVC edge banding. The drawer is fitted with two way slides so that it can be opened from both sides. Bottom & middle horizontal panel provides storage area. Four nylon bushes are provided. 2. Top: 8mm thick toughened glass with UV plate glued on it. This glass is fixed with the side vertical panels. 3. Construction: Knock-down. 4. Finish: PLT panels are in WENGE shade having SUEDE finish. UV guled plates under glass have SUNRAY finish. 5. Hardware: Dowels for knockdown assembly with high quality standard hardware like screws, two way drawer slides and nylon bushes etc. 6. Packet: One packet. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Meraki Corner Table Overall Size : Width : 60cm Depth : 60cm Height : 49.8cm Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : Knock down .Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Hardware : Hettich . Construction : Knock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 nos. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Mingle Conference Table 21 Seater Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes.Understructure-It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction.Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Management-An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Kareena High Back Chair. SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support for comfortable seating posture. BACK SIZE: 48cm.(W) X 76.0cm.(H) SEAT SIZE: 51.0cm.(W) X 48.0cm.(D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The armrest top should be made of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height should be adjustable up to 6.5±0.5cm. in 5 steps . KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism: The mechanism should be designed with the following features: • 360° revolving type single point control. • Front pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat back tilting ratio of 1:2 • Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions ADJUSTABLE BACKREST: The backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and can be locked in 5 positions for correct position of lumber support. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 10.0±0.3cm. PEDESTAL ASSEMBLY: The pedestal should be fabricated from 0.2 ± 0.02 cm thick HR sheet . chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal should be 66.0±0.5cm. Pitch-center dia. (76.0±1.0 cm with castors). TWIN WHEEL CASTORS The twin wheel castors should be injection moulded in black Nylon. Overall Dimensions of Chair Seat Height - min 47.5 to max 57.5cm. Height - min 103.5 to max 120.5cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply ,Fitting & Fixing of Kareena Mid Back Chair, SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support for comfortable seating posture. BACK SIZE: 48cm.(W) X64.5cm.(H) SEAT SIZE: 51.0cm.(W) X 48.0cm.(D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The armrest top should be made of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height should be adjustable up to 6.5±0.5cm. in 5 steps . KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism: The mechanism should be designed with the following features: • 360° revolving type single point control. • Front pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat back tilting ratio of 1:2 • Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions ADJUSTABLE BACKREST: The backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and can be locked in 5 positions for correct position of lumber support. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 10.0 ±0.3cm. PEDESTAL ASSEMBLY: The pedestal should be fabricated from 0.2 ± 0.02 cm thick HR sheet ( should be : DD 1079 / HR skin pass ), chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal should be 66.0±0.5cm. Pitch-center dia. (76.0±1.0 cm with castors). TWIN WHEEL CASTORS The twin wheel castors should be injection moulded in black Nylon. Overall Dimensions of Chair Seat Height - min 47.5 to max 57.5cm. Height - min 93.4 to max 110.4cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm.The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Steel Rack . The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , GRIHA Greenguard by UL and Indoor Air Quality Gold by GLOBAL Services. Slotted Angle Rack, Size : 84" x 33.5" x 17.5" inc. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Insight Table1665W (1665W X 900D X 740H) Size : 1665 X 900 X 740 from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers Worktop 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading.C – Frames Legs 1.6 mm thick M.S Cframe Supporting the Top. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Visitor Chair 1007 The seat and back should be made from 1.0±0.1cm. thk. hot pressed moshould be ture resistant tant.commercial plywood and upholstered with P.U. foam and fabric. BACK SIZE: 42.0cm.(W) X 26.5cm. (H) SEAT SIZE: 42.0cm. (W) X 42.0cm. (D) The HR Polyurethane foam should be moulded with density =45+1-2 kg/m3 and Hardness load 16 ± 2 kgf for 25% compression. The understructure assembly should be a cantilever type mainframe made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated--( DFT 40-60 microns ). The armrests should be made in twin tube form using 0 1.58cm. (5/8") x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ). The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted. The bidder has to submit a bid specific authorization certificate from the OEM.