Public Works Department Tender

Installation, testing & commissioning of the above-said split ACs incl. supply & fixing required Angle Iron Structure on wall for placing outdoor unit & mending good the damages as per direction of E.I.C.

Supply & Laying of 4core 1.5sq.mm 1.1 KV insulation grade sheathed Cu cable with gas line as per direction of EIC for making interconnection/communication between Indoor to Outdoor unit of Split type AC m/c.(Make- Havells/Finolex/KEI/Polycab as approved by E.I.C)

Supply and fixing of 19mm thickness plywood of size- (4ft x 2ft =8sqft) on exsisting window after cutting glass by diamond cutting tools for passing refrigerent and drain line as per direction of E.I.C.

Supply & Laying 20 mm hard PVC pipe (heavy type) for water drainage.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch of grey/black/white colour as per choice by the authority/E.I.C (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA as approved by E.I.C) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. [E-24/1]

a) Average run 6 mtr [E-24/1(b)]

b) On board [E-24/3/(a)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [E-14/ 1(a)(iii)]

ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)(ii)]

iii) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)(i)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

i) 2.5sqmm [F-5/9(i)]

ii) 4 sqmm [F-5/9(ii)]

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. [E-17/1]

2 Row 18 Module [E-17/1(f)]

4 Module [E-17/1(a)]

Supply & Fixing 240 V 6 A Modular type switch (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC) on existing GI Modular type switch board having top cover plate and making necessaryconnections as required. [E-17/3(a)]

Supply & Fixing 240 V 16 A Modular type switch (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required [E-17/3(b)]

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/4(a)]

Supply & Fixing 240 V, 6/16 A, 5 pin Modular type plug socket (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/4(b)]

Supply & Fixing 240 V, 25A Modular switch type SP MCB (C-Curve) (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/9(a)]

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket with 6A Modular type switch of grey/brown/other colour as approved by the authority/E.I.C (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC), without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-18/9(a)]

Supply & Fixing 240 V, 16/6 A, 3 pin Modular type plug socket with 16A Modular type switch of grey/brown/other colour as approved by the authority/E.I.C (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC), without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-18/9(b)]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [E-18/10]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length [C-2/17]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C-3/21(a)]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [C-4/29]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board [D-13/20(a)]

Supply & fixing of Blank Plate for modular box

Supply & fixing of Indicator for modular box

S&F recessed mounting 2ftx2ft square 36 Watt LED luminaire of warm-white or cool day light(as per choice of the authority/E.I.C) with glare-free illumination having luminous efficacy- 100lm/W and complete with all accessories (Make : Crompton /Phillips / Wipro or manufacturers with own NABL acreedited Lab having valid Test certificate as approved by E.I.C] incl. inter connection & necy. fixing arrangement as per direction of EIC.

Supply of 12''(300 mm) Sweep heavy duty best quality AC Wall Bracket Full metal body Fan (Make : Orient / Crompton / Usha as approved by E.I.C)

Supply & fixing Timer Control Unit for single phase Split type AC machine assembled with following accessories: - i)12-way double-door(Metal door) SPNDB Box (L & T cat no.-DBSPN012DD or equivalent model of Legrand/ Siemens as approved by E.I.C)-1 no. ii)25A DP 30mA RCCB (Make: L&T Cat no.-BG202503 or equivalent model of Legrand /Siemens ) - 1 no. iii)Digital 24 hour time switch (Make-L&T Cat no.-67DDT0 or equivalent model of GIC/Siemens) -1no. iv)25A 2-pole power contactor (L&T: Type- MU25 ; Cat no.-CS90118 or equivalent model of Siemens/ABB)-1no v) 6 amp auto mannual toggle switch (Make- L&T or equivalent make as approved by E.I.C) vi)LED indicating lamp (L&T: SIL R 240V)-1 no. vii) ON/OFF Push = 2 nos viii)2X4sq.mm+1x2.5sq.mm copper wire -4 mtr. ix)1.5sqmm copper wire-3 mtrs. x)8 Pin Relay 5Amp 2 Pole General Purpose Relay - MKG2P Plugin type enclosed version with LED Indication - With Mounting Base (220V)( make-Sulzer or equivalent model of Siemens/ABB) xi) S&F Thermal overload Relay(9-14A) (Make-L&T cat no.-CS90207OOVO or equivalent model of Siemens/ABB)- 1no. All control circuit wiring would be made by 1x1.5 sqmm FRLS stranded Cu wire(Brand approved by E.I.C) and the I/C & O/G circuit with 1x4sqmm copper wire of suitable length maintaining colour code incl taping, socketing to complete the work.

Supply & fixing automatic single phase AC starter of 21Amp capacity equipped with Timecheck, Voltcheck & Ampcheck and 3-digit display (Make- Electron-model no.-OLP-3+ or equivalent model of LT/Legrand as per dierction of E.I.C) to be fixed on existing GI box.

Supply & laying 1.1 KV grade 3 core 4 sqmm flexible copper Cable with screw, saddle,drill machine nut bolt etc all necessary items needed for connection. (from starter to A.C outdoor Connection)(make: Havels/KEI/Polycab/Finolex as per approved by EIC)

Add. G.S.T.@ 18% on total value.

Add. LWC.@ 1% on total value