Public Works Department Tender

SITC of PATCH CHORD Category 6 4-Pair, F/UTP, Horizontal cable, 23 AWG solid bare copper conductors WITH RJ45 CONNECTOR AT BOTH END 2 MTR LENGTH, Make: Molex/Legrand/R & M/COMMSCOPE/Belden Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of: STQC certified Face Recognition Enabled Biometric Device with the following Configuration: Fingerprint Sensor : Optical (Scratch Free Sensor Surface); Image Resolution: 500 DPI / 256 Gray; Sensing Area: 15 x 17 mm; FAP: FAP10; Fingerprint and with Touch Screen, PoE, Wi‐Fi and IP65 Ratings, RF Card based Door Controller support, Support EM Prox, PoE, IP65 and Wi‐Fi Built‐In Interfaces Such as USB, Door Lock, Door Sense, Exit Reader, Exit Switch; Display: 5 inch TFT LCD or higher; Processor: 1.3 GHz Quad Core, 64bit; RAM: 1GB RAM; Memory: 16GB with Expandable up to 32GB included; WiFi: 802.11 b/g/n 2.4GHz; Bluetooth: Bluetooth 4.2 or higher; SIM Slot: Dual SIM Card or 4G/5G USB Dongle; GPS: GPS/AGPS; Camera: 2 MP Autofocus Rear Camera with LED; Baseband Version: MOLY.LR9.W1449.MD.LWTG.MP.V190,2018/06/13; Certification: ISO Compatible Fingerprint Templates and Images ANSI Compatible Fingerprint Templates and Images 500 DPI STQC/Aadhaar Approved Fingerprint Sensor CE, IEC60950, RoHS Certified Fingerprint Sensor; Connectivity: GPRS/EDGE Enabled, 2G, 3G, 4G, GPS; Acceptance and Rejection Rate: Lower FRR and FAR; Display Resolution: 1280 x 720 Pixels; Audio Jack: Yes; Ports: Micro USB v2.0 Port - 1nos. (With OTG Support) or One Micro USB v2.0 Port & One Round Pin Charger Connector; If the internet/MPLS link failure storage of attendance in the local controller and push the DATA to central server automatically when the services are restored. The controller should be having 500000 event storage capacity. The communication between software and Controller should be on controller MAC ID synchronization. The controller should be IK06 , IP65, The controller should have inbuilt interface for smart card and should be able to enroll finger and smart card from the controller directly. The controller should communicate with Central server over LAN, MPLS and Internet automatically. The controller should have inbuilt contactless smart card interface. The Controller should have inbuilt 5" capacitive Touch Screen and should pop up Photo while employees use the controller for attendance punch, The controller should be IK06, IP65 and should have inbuilt USB port. The controller should have inbuilt POE interface as well as external power source. The controller should support 9600 fingerprint in 1:N mode and 200000 fingerprint in 1:1 mode . Template per user 30 and card per user 30. The Controller should have Protective box to Protect controller from external tampering. Including protective box, battery backup (2200mAh, 3.7V) and (03(three) yeras subscription of 4G/5G SIM or 4G/5G USB Dongle with data of 2Gb/day). The device should be CE, FCC, UL, ROHS 16, BIS certified. Make: Mantra, Tyco, Matrix, Bosch, Honeywell, Hikvision, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of: Application Software Platform for minimum 50 Users. Supports Up to 25,000 Door Controllers Advance Access Control, Advance Time Attendance and Enrolment Management Compatible with all Hardware and Software Modules as per site requirement. 2000 user Web based user friendly GUI application and real-time monitoring of door controllers from one place, Built on 3-Tier, .NET Platform with MS-SQL and Oracle database, expandable and modular without change in the hardware-Built on 3-Tier, .NET Platform with MS-SQL and Oracle database, expandable and modular without change in the hardware, Provides head count of number of users in the premises, basic door access feature to users, user photo display on large screen during access, O virtual message board facility for posting daily notices, news, announcements,should support upto 65000 door controllers and 1 million users in the network, automatic and customized SMS & E-mail notifications, informative reports & charts with various filters, customized report templates; and export reports in Excel, Word, RPT, PDF, CSV and XML etc, automatic E-mail scheduler facility for different reports, user enrolment management software module with user photograph upload facility, user verification functionality, mass enrolment functionality, user name and ID search functionality, Dual Credential Access: Device will allow the User to access the device using FACE + FINGER/ FACE+RFID credential access etc, Alarms:Door abnormal: When a User Access the device and opens the door but door is not physically closed within Pulse time (Door Open Timer), device will generate Door Held Open Alarm after configured duration it will be converted to Abnormal., Door Force Open: When a User tries to open the door without valid swipe, device will generate Door Force Open Alarm. , c. Door Held Open Too Long Alarm: If the Door remains in physically open condition after Door Open Timer, device will generate Door held Open Alarm. Alert Notification: System should send SMS and EMAIL notifications for the events, Door Force Open Event, Door Abnormal, Door Offline, User Denied, User Allowed (In Specific Time Range). Time Stamping: Based on the Allowed or Denied Event, system can take different actions. List of Events and Actions are shown as like access allowed, access denied, invalid user, duress alarm, panic alarm, door abnormal alarm, door force open alarm, tamper alarm-recording, popup, mail image. Minimum 2 Person Entry at Start and Maximum Occupancy: Software allows Admin to configure minimum occupancy for the area/zone. and maximum xcapacity limit restriction.Multiple location Monitoring, Hooter integration for every door. Make: Mantra, Tyco, Matrix, Bosch, Honeywell, Hikvision Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of IP 2MP IR Dome Camera (complete with perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.8” Progressive Scan CMOS; Min. Illumination: Color: 0.008 Lux @(F1.2-1.7, AGC ON), 0.0002 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.8 - 3.6 mm mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.2 to F1.7 with Auto focus; Lens Mount: Ø14; IR Range: 30 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264/MJPEG; Video Bit Rate: 128 Kbps to 8 Mbps; Audio Compression: VBR/adjustable CDR/G.711 / G.722.1/G.726/MP2L2/PCM; Environment Noise Filtering: Yes; Audio Sampling Rate: 8kHz/16kHz/32kHz/44.1kHZ/48kHz; Image Max. Resolution: 1920 × 1080, 50Hz: 30fps; Image Enhancement: BLC/3D DNR/HLC; Image Setting: Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser; Day/Night Switch: Day/Night/ Auto/Schedule/Triggered by Alarm In; Alarm Trigger: Motion detection, video tampering, network disconnected, IP address conflict, illegal login, HDD full, HDD error, Alarm input, Alarm output; Alarm output Protocols: TCP/IP, ICMP, HTTP, etc; Edge Analytics: line crossing, region entry/exit, intrusion, video blur, Perimeter Protection, etc; Simultaneous Live View: Up to 6 channels; User/Host: Up to 8 users, 3 levels: Administrator, Operator and User; Interface: 1 input (line in, 3.5 mm), 1 output(3.5 mm), single track / 1 RJ45 10M/100M self-adaptive Ethernet port / 1 input, 1 output (max. 12 VDC, 30 mA) / 1Vp-p composite output (75 Ω/BNC) / Built-in Micro SD/SDHC/SDXC slot, up to 128 GB / H.264 encoding supports; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP67, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site). Make: Infinova, panasonic, Honeywell. Axis, Pelco. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of UPS Power Point to Network Racks & Desktop Workstation, Display, Biometric Attendance System at different location through suitable power networking with 4/6 Sq mm 3 core FRLS PVC insulated armoured ISI marked copper cable (maximum 80mtr or as per site requrment), 3x16/6A Sockets with Separate 3x16/6A Switch and 1 x 6/16A MCB mounted in 16SWG GI box with Bakelite top cover complete. Switch, Sockets & MCB Make: Legrand /Hager/SIEMENS/L&T, Wire Make: Polycab/ Mescab/Finolex

SITC & Laying of PVC conduits(ISI marked) / floor channel laying through surface with all accessories as required for the entire system with all OEM accessories. (Quality: MMS; Ø=25mm) Make: Precision, Presto Plast, Supreme, Quality : ISI Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

ADD GST @18%

Labour Welfare Cess @1%