Public Works Department Tender

Road Work Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specifications Clause 201 for Rural Roads of MORD. (I) By Manual Means a) In area of non-thorny jungle

Providing and laying Bituminous Profile Corrective Course using Mobile Hot Mix Plant (Light Duty) and using Pakur Variety aggregates of Grading-2 of Table-33 premixed with 75kg of bitumen per cum, transported to site laid over a previously prepared surface at specified laying temperature to the required grade, level and alignment, as per specification to achieve the desired compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per direction of Engineer-incharge. Using Bitumen VG-40

Bituminous Concrete Providing and laying bituminous concrete with Batch Type Hot Mix Plant using crushed Pakur Variety aggregates, filler materials (Cement /hydrated lime /Rock dust) and premixed with bituminous binder of specified grading @5.2% (min) for Gr.-1 & @5.4% (min) for Gr. -2 , as per table 500-17 and mix design done as per table 500- 10 and job mix formula as per cl. 505.3.3, Including screening, cleaning of chips and preparing a uniform and qualify mix, transporting the hot mix to work site, laying the mixed Pakur Variety materials at specified laying temperature as specified in Table 500-2 with a hydrostatic paver finisher with sensor control to the required grade, level and alignment over prepared surface coated with tock coat, rolling with smooth wheeled and vibratory or tandem rollers or with a pneumatic tire roller of 12 to 15 tonne weight with a tire pressure at least 0.56 Map, to achieve the desired density as per clause 505.3.5, Including cost and carriage of bitumen, crushed aggregates, filler materials and hire charges of machinery and equipment for construction and quality control, complete as per Clause 507 of Specifications for Rood & Bridge Works of MoRT&H (5th Revision). B. For Grading 2 (13.2 mm nominal size, 30mm thick.) (i) Using Batch Type HMP of minimum capacity 100-120 TPH & Using Bitumen VG-40.