Public Works Department Tender

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required. 415 V, 125 A, 4 no. Cu. Bars. [19(b) /D-13 ]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand ) 4 Way [ 14 / D- 10 ]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. 2+12 Way[ Legrand ] [ 13 / D- 9 ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand ] 6-32 A SP [ 7 / D- 6]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand ] 40 A DP [ 6 / D- 5 ]

63 A FP [ 6 / D- 5 ]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. Average run 9 mtr [ 1(d)/E-24 ]

Do-Do-as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. Connection making earthing attachment as to GS. On Board Plug. [ 3(a)/E-24 ]

Do-Do-as ECC, to 6A 3 pin Modular type separate plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. Connection making earthing attachment as to GS. Average run 7.5 mtr [ 3(f)/E-24 ]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-18/ 9(b)]

S/F OLP3+ upto 21A A.C Starter suitable with G.I box flushed in wall with voltage check, Amp check, Time check incl. all connection. [NS]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc as per G.S. [PageNo. E-17 Item No.-5 (a)]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [PageNo. E-17 Item No.-5 (a)]

The following 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 3 x 1.5sqmm [ 1(a)/ E- 14 ]

2 x 2.5sqmm + 1 x 1.5sqmm [ 1(a)/ E- 14 ]

2x4sqmm + 1x2.5sqmm [ 1(a)/ E- 14 ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes as per GS. 1.5sqmm [9 (i)/F-5]

2.5sqmm [9 (i)/F-5]

4 sqmm [9 (ii)/F-5]

Supply of 2/4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make -Brand approved by EIC] 2 core 6 sqmm [ NS ]

4 core 10 sqmm [NS]

4 core 25 sqmm [NS]

Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. 2 core X 6 sq.mm. [ 2(a)/ F- 1 ]

Laying of following 2 / 4 Core cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. 4 core 25 sqmm [ 1(a) / F-2 ]

4 core X 10 sq.mm. [ 1(b) / F-2 ]

2 core X 6 sq.mm. [ 1(a) / F-2 ]

Laying of cable upto 35sqmm, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth 75mm and mending good the damages to original finish incl. removing the rubbish. [ 5(i) / F-3 ]

Laying of one no. cable upto 50 sqmm through existing GI Pipe as per GS[ 3(a)/ F-1 ]

Supplying & fixing medium gauge 25mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings For protection of above cable as required. [ 11(a)/ F-6 ]

Cost of Concrete road cutting including necessary mending goods the damage as far as practicable with necessary Cement, Sand, Stone chips, Jhama Metal etc..(N.S)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 25 sqmm [ 7(c) / F-4 ]

4 core 10 sqmm [7(c) / F-4 ]

2 core 6 sqmm [7(a) / F-4 ]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 core 25 sqmm [ 8(b) / F-5 ]

4 core 10 sqmm [8(b) / F-5 ]

2 core 6 sqmm [8(b) / F-5 ]

Supply of 4ft LED T-8 box type single batten with end cap complete with all accessories (Phillips make Cat no. - TMC 502 P 1 x T-LED 22 W P3241) [NS]

Supply of 22W LED T-8 lamp (Make-Philips, Type-MAS LEDtube 18W, 865 T8 I – 1800lm or equivalent of Wipro, Havells as per choice of EIC ).

Fixing only single/twin fluorescent light & light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [17/C-2]

Supply & Delivery 240 V,50 Hz, Metal body Heavy duty Exhaust fan of following sizes and RPM (Make -- EPC or any approved by EIC) 12" (30 cm), 1375 RPM

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following dia incld. Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 12" (30 cm), 1375 RPM

S&D of 230 V, 1 200mm Sweep ceilingfan without remote ( 28-32 watt BLDC fan class of insulation 'B', SERVICE VALUE (CMM/W) minimum 6.85, R.P.M 350 (min) , P.F not less than 0.9, built in 2.5 KV SPD, without remote system) with complete accessories [Make - crompton, atomberg, orient, Havells] Manufacturer'S warranty should not be less than five years. [NS]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [21-a/C-3]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. [20-a/D-13]

Wiring with 3 X 1.5 Sqmm PVC copper wire in 13mm dia polythene pipe from loop box to HPSV fitting. (average run 3 mtr.) [N/S]

S&F LED Street Light Fitting having lumen output 8000 (minimum), System lumen eficacy 120lumen/watt (Minimum), Input Power 70W (Maximum), IP66, 5700CCT, 70CRI, PDC Aluminium Housing, with manufacturer's logo embossed on the housing as per direction of the EIC. [Make - Philips, Wipro, Crompton, Havells] [NS]

S&F LED Flood Fitting having lumen output 10000 (minimum), System lumen eficacy 120 lumen/watt (Minimum), Input Power 120W (Maximum), IP66, 5700CCT, 70CRI, PDC Aluminium Housing, with manufacturer's logo embossed on the housing as per direction of the EIC. [Make - Philips,Wipro, Crompton, Havells] [NS]

Supply and fixing timer DB on wall surface for operation of 2 nos. 1.5/2 ton A.C. machine febricated with the following components :- a) 240V, 20A DP MCB ( Legrand, cat no. - 408592)-1 no. b) 25A TP Power Contactor with 220V coil voltage, ( L&T, Cat No. MNX18-3P, CS94100 )-2 nos. c) Daily & weekly programmable basis digital time switch, min switching time 1 min, 25 ON/OFF programs,6 yrs. Battery backup, settable DST & key pad lock features., 1no, Cat no. – 67DDT0. -1 d) Timer DB ( Legrand, Cat no.- 5076 12) 12 way SPN DB- 1 no. e) SPMCB (20A) - 2nos. f) One no. Red and one no. green 240V LED indicator for indicating Auto & bypass indication (Make : L&T) incl. toggle switch, terminal stud bolts etc. The above 18A timer controller components will be housed in phosphatised powder coated double door 12 way SPN DB box with neutral bar, din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection incl. earthing attachment.

Supply and fixing timer DB on wall surface for operation of compound light febricated with the following components :- a) 40 A DP MCB(10kA, C curve)—1no, 240V, 40A DP MCB, Cat.- BB2040DC ( L&T)-1 no. b) 25A TP Power Contactor with 220V coil voltage, ( L&T, Cat No. MNX18-3P, CS94110 ).-1 no. c) Digital Time Switch ( L&T, Cat No. Crono 67DDT0 )-1 no. d) 12 WAY SPN DOUBLE DOOR DB- DB should have door reversibility feature, inbuilt pad locking facility, 1 no, cat no. LT —DB SPN012DD e) One no. Red and one no. green 240V LED indicator for indicating Auto & bypass indication (Make : L&T) incl. one no. three point toggle switch and 4 way terminal stud bolt.

Supply & Delivery of outdoor stand mounted feeder pillar box enclosure(Heavy Duty Sheet) with 20A TPN MCB incomer, digital timer, 25A TP contactor for the automatic switching of luminaries, power tool control with raise-lower push button, incl. necessary connections/painting as required as directed by EIC.

Supply & delivery of 7.0 Mtr Hot Dip Galvanized (86-65 micron dry film thickness) Octagonal Pole, as per BSEN 10025; ASTM A572; IS 5986: IS 4759/2629, ASTM A123 and BSEN IS 1461 standard. The pole should be 7.0 Mtr long, bottom dia-130 mm, top dia-70 mm, thickness-4 mm, continuously tapered and shall have octagonal cross section with pole cap at top, necessary cleat attachment/hanger for arm brackets. Base-plate having dimension 220x220x12 mm and 4 nos 'J' Type foundation bolt with double nut and plate washer, bolt dia 20 mm , PCD- 200-225 mm ,bolt length- 700 mm, Projected bolt length - 100 mm( these dimention are subjected to tolerance as per IS-2102 except for bending radius). The pole will consist of a built-in loop-box having one number 32 A, 3 Phase 3 Way connector with Neutral link on porcelain insulator (for incoming/outgoingcable and luminaries connection), and 4 numbers (6-32 A) SPMCB. The door opening shall be complete with a closefitting, vandal resistance, weatherproof door ( to IP-55 of IS:2147) , providing with a heavy duty double internal lock with special paddle key. The door opening shall be carefully designed and reinforced with welded steel section , so that the mast section at the base shall be unaffected and undue buckling of the cut portion is prevented.The Pole should be supplied with adequate templates for the purpose of construction of base foundation.The pole should have earthing terminals 02(two) nos at a height of 600 mm from the base plate for connection of earth continuity wires/ conductors .(Make:Jindal/BAJAJ/ UTKARSH/EIC Approved )

S&F 50 mm. dia 1.0 mtr. long detachable type below G.I. Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC. (86-65 micron dry film thickness) (As per IS 5986: IS 4759/2629, ASTM A123 and BSEN IS 1461 standard.)

Erection with carrying upto 7 Mtr octagonal GI (Hot Dip Galvanised in single dip) pole 1.6 Km from the store to work-site with foundation of M20 grade concrete for 7.0 Mtr GI Octagonal Pole with all the materials like sand, cement, stone chips, reinforcement steel, binding wire etc as relavent IS Code. soil bearing capacity at site as 10 T/sqmtr., by PCC Base foundation having (L-1000mm x W-1000mm x H-100mm) & RCC foundation having dimention (L-500mm x W-500mm x H-1400mm) including neatly cemented finish (3mm thick) partly below and above ground level. There should be multiple alkathene pipes upto 1.2 mtrs of 50 mm dia of adequate length for distribution of incoming & outgoing cables for street light wiring as directed by EIC in the CC foundation of octagonal poles.

Supplying and Fixing GI water proof looping cable box of size (200 x 550 x 100mm) having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same flushed in wall incl. painting[16 / I- 2 ]

Supply & Fixing single Arm bracket 1.5m long detachable type made by 40mm dia GI pipe (Bansal make) as per G.S

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (i) One coat of red lead/Zinc chromate priming (ii) 1st coat of synthetic enamel paint over the primer (iii) 2nd coat of synthetic enamel paint over the1st coat [7(a)/H-2]

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing With GI Loop Box[ 12(b)/ I-1 ]

Excavation of soil for installation of Earth Electrode and filling & ramming. For soft soil [1(a)/G-1 ]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2 ]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. [5(a)(i)/G-2]

Earthing with 50 mm dia GI pipe( ISI-M) 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. [ 2(a)/G-1 ]