Public Works Department Tender

5/8" (15.88 mm.) (for suction) & 1/4" (6.4 mm) ( for discharge) dia (Soft drawn) Cu. Pipes (As per standardBS864 or ANSIB 16.22) mm incl. 19mm thick insulation.

Supply & Laying of 4 core 1.5sq.mm 1.1 KV insulation grade sheathed Cu cable with gas line as per direction of EIC for making interconnection/communication between Indoor to Outdoor unit of Split type AC m/c. (Polycab/Gloster/Finolex/KEI/ Havells /RR Cable as approved by E.I.C)

Supply & Laying of 3 core 2.5sq.mm 1.1 KV insulation grade sheathed Cu cable with gas line as per direction of EIC for making interconnection between Indoor to Outdoor unit of Split type AC m/c. (Polycab/Gloster/Finolex/KEI/ Havells /RR Cable as approved by E.I.C)

Supply and laying 25mm PVC pipe (heavy type) for water drainage.(25mmOD, 1mm thick) with 6mm nitrile rubber insulation with proper support & bracket as per direction. (Make- Supreme/Oriplast).

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene / PVC rigid pipe and by the prelaid GI fish wire and making necy. connection as required [E-9/1]

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [E-9/1(v)]

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works [E-16/7]

a) 20mm size [E-16/7(a)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-9]

i) 2.5sqmm [F-5/9(i)]

ii) 4 sqmm [F-5/9(ii)]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/5(a)]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [E-17/5(b)]

Supply & fixing automatic single phase AC starter of 21Amp capacity equipped with Timecheck, Voltcheck & Ampcheck and 3-digit display (Make- Electron-model no.-OPL-3+ or equivalent model of LT/Legrand as per dierction of E.I.C) to be fixed on existing GI box with all fixing accessories complete as to G.S.

Supply and fixing of Timer DB comprising of following components concealed in wall and mending damages as to original finish. (a) Double door SPN MCB Distribution board with IP-42/43 protection- 2+10 Way Enclosure (LTSD12N) (mk- L&T) with neutral bar and earthing arrangement.- 1 No (b) S & F of 240 V, 25A DP MCB (Make- L&T) of Breaking capacity 10kA & C characteristics to be fixed on din rail of existing MCBDB - 1Nos (c ) S & F of Single Phase Time Switch. (Make- L&T, Cat No-67DDT0) to be fixed on din rail of existing MCBDB- 1 Nos (d) S & F of 2 Pole Contactor. (Make- L&T, Cat No- CS90118) to be fixed on din rail of existing MCBDB- 1 Nos (e) S & F of Indicator (Make- L&T) to be fixed on exsisting MCBDB after necessary fabrication work- 2 Nos (f)6 amp auto manual toggle switch – 1 no. (L &T) (g) All interconnection would be made by FR stranded Cu wire(Brand approved by E.I.C) of suitable size & length maintaining colour code incl taping, socketing to complete the work as per direction of E.I.C

Disconnection & dismantling existing old Electrical installation, Switch-board, wiring, Electrical fitting/fixtures and old AC Machine etc with owns tools & takles incl. mending good damages and clearing/removing from the site as directed by EIC.

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor [ item no.3(vi) of Page-172 of PWD(SOR)-building works - Vol-I w.e.f 01/11/2017]

19 mm thick

Add GST @ 18% on sl. No. 1 to 15

Add LWC @ 1% on sl. No. 1 to 16