Public Works Department Tender

SITC of floor mounted cubical type self supporting and standing compartmentalized powder coated waterproof 16SWG (Suitable Size) GI Sheet Panel with separate bus & cable alleys made of 3mm thick CRCA sheet & angle iron frame supported incl. necy. interconnection by suitable size & grade copper cable / solid link/ flat bar incl. making cable end terminal box float boxes after making drill holes ect. As required incl. painting the panel board by powder coated paint as per direction of E.I.C and S & F of the following. A) Incoming i) 415Volt, 400 Amp. FN type TPN change Over switch (LT /Siemens make)-----1 no B) Bus Bar Chamber-- 415 Volts, 4 Bars B.B.C incl. 4 Nos. 600 Amp capacity electrolytic copper Bars on non-hygroscopic porcelain insulator of requisite length incl. drill hole etc. as required and as approved by E.I.C C) out going (i) 415 Volt 250 Amp FN type TPN main switch with HRC fuses(LT/Siemens make) ---2 nos ii) 415 Volt 125A Amp FN type TPN main switch with HRC fuses (L&T make) --- 4 nos. D) Instruments. i) 0-500V voltmeter(AE make) with selector switch(Kaycee make)-- 1 set ii)0-400 A ammeter(AE make) with selector switch(Kaycee make )—1 set iii)suitable CT---3 nos iv)sliding fuse –3nos v)LED type indicating lamp—3 nos incl. interconnection. As approved by EIC.

SITC of floor mounted cubical type self supporting and standing compartmentalized powder coated waterproof 16SWG (Suitable Size) GI Sheet Panel with separate bus & cable alleys made of 3mm thick CRCA sheet & angle iron frame supported incl. necy. interconnection by suitable size & grade copper cable / solid link/ flat bar incl. making cable end terminal box float boxes after making drill holes ect. As required incl. painting the panel board by powder coated paint as per direction of E.I.C and S & F of the following. A) Incoming i) 415Volt, 250 Amp. FN type TPN change Over switch (LT /Siemens make)-----1 no B) Bus Bar Chamber-- 415 Volts, 4 Bars B.B.C incl. 4 Nos. 415 Amp capacity electrolytic copper Bars on non-hygroscopic porcelain insulator of requisite length incl. drill hole etc. as required and as approved by E.I.C C) out going (i) 415 Volt 125 Amp FN type TPN main switch with HRC fuses(LT/Siemens make) ---3 nos ii) 415 Volt 63A Amp FN type TPN main switch with HRC fuses (L&T make) --- 3 nos. D) Instruments. i) 0-500V voltmeter(AE make) with selector switch(Kaycee make)-- 1 set ii)0-400 A ammeter(AE make) with selector switch(Kaycee make )—1 set iii)suitable CT---3 nos iv)sliding fuse –3nos v)LED type indicating lamp—3 nos incl. interconnection. As approved by EIC.

S&F 12 way Vertical TPN PBDB with 3 phase in coming & TP/SP outgoings, as follows with vertical type busbar system, in SS enclosure (IP-43 protection) (Make:- Legrand/ABB/L&T) double door comprising of neutral link incl. & provision for earthing attachment concealed in wall after cutting the brick wall and mending good the damages to original finish incl. interconnection with suitable size of copper wires and earthing attachment. Incoming-415V, 10KA, 125 A,4 pole MCCB ----1 no Outgoing- 415V, 10KA, 63A T.P MCB C curve ---12 (make: Legrand/Schneider/Siemens).

Supplying & fixing 415V, 6-32A per way ,6 way TPN MCBDB with SS enclosure double door with IP 42/43 protection with 63 A FP isolators as incomer and 18 Nos. 6-32A SPMCBs ( 'C' Curve , 10kA ) as outgoing ,concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/Schneider/Siemens)

Supplying & fixing 250V,6-10A per way , SPN MCBDB with SS enclosure double door with IP42/43 protection with DP isolators as incomer and SPMCBs ( 'C' Curve , 10kA ) as outgoing ,concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/Schneider/Siemens ), 2+12 way Enclosure, 607712, 40A DP Isolator,10 Nos. SPMCB.

Supplying and fixing of 415 V 32A Four Pole MCB With suitable size enclosue of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Legrand/Schnider/L&T).

Supplying and fixing of 415 V 16A Four Pole MCB With suitable size enclosue of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Legrand/Schnider/L&T)

Supply & Fixing of 3ft x 1 ft GI Angle Iron frame from floor welded and 6 inch grouted in floor and mending good damages after work with main switch connection including painting & necessary nuts & Bolts as per direction of EIC 40x40x6 with necessery welding. (make: Approve)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. a) 4 X 10sqmm. + 2 X 6sqmm.

b) 4 X 6sqmm. + 2 X 4sqmm.

c) 2 X 6sqmm. + 1 X 4sqmm.

d) 2 X 2.5sqmm. + 1 X 1.5sqmm.

e) 2 X 1.5sqmm. + 1 X 1.5sqmm.

Cutting channel of 40 mm x 40 mm size on masonary wall incl. S&F heavy guage polythene pipe dia as stated below by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. Mending good damages to building works. [For AC point (a) 19 mm dia 3 mm thick polythene pipe with out earth continuity wire.

Supply & Fixing 20 mm dia PVC rigid Conduit pipe ( Precision make ) on wall and mending good the damages as to original finish as to GS.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]).(Black/Gray colour) Avg.Run- 8 Mtr.

Avg.Run- 10 Mtr

On board plug point with 5A 3/5 pin modular type plug socket(Black/Gray colour)

Supplying & fixing of 250 V 2 X 6 A modular type Switch, 2x6A 5 pin plug socket (make:Approve) fixed on suitable size 6 M modular type G I switch board with top cover plate flushed in wall incl. mending good damages to original finish.(Black/Gray colour).

S & F Angular Holder with 9W LED lamp.( make: Phillips/CG/Orient)

S & F of Twin LED Fittings with 2x18W 2100 lm 1200 mm long PC body retrofit type tube light with box type metallic fittings as approved by P.W.D. (make: Phillips / CG/Orient)

S & F of 45W IP66 rated Full metal body circular type LED Flood Light with hing arrangement suitable for fixing on Iron structure. (make: Phillips /Orient/Havells/Jaguar /Magic) with 5years warrenty.

S & F of 36W 2ft X2 ft recess mountd celling LED light fittings white powed coated CRCA Housing with full window acrylic diffuser including necessary connection.(Make:CG / Philips/ Jaquar/Orient) (CAT NO.CCR-127-36-57-SL-NWH Aura 1/ RC380BLED30S 6500 G4 Full glow / LULTU15036XC Ultima Ultra) with 5years warrenty.

S&F M/S fan clamp(Average length of two piece suitable for holding MS steel structure above ceiling as per direction of EIC approved specification,fabrication 40mm x 9mm MS flat,painting incl.mending good damages to the building

S &F of 1400 mm sweep A C ceiling fans (make-C.G-zapar / Usha-striker/Orient).with minimum 2 years warrenty.

S&F of 230V, 400W step type 2M electronic fan regulator suitable for existing modular switch board with top cover plate (make:-Approve) (Black/Gray colour)

S & Fixing exhaust fan, Louver shutter after making hole in wall and mending good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia as follows (make: Approve make ,as per choice of EIC)) 18 "exhaust Fan( 920 RPM)

Supply and fixing compression type brass gland and fininshing the end of the cable by means of crimping method as to G S. A) 4 core 95sqmm

B) 4 core 25 sqmm

S&F of required size solderless Cu socket of following Cu wires. a) 6sq mm

b) 1.5sq mm

c)2.5Sqmm

d) 10 sqmm

Earthing the installation by 50 mm dia G I pipe by ISI-Medium on murrom soil.

Excavation of morrum soil.

Supply and fixing Earth Bar 25 X 6 mm on wall incl suitable.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 65mm dia

Supply & Delivery of 2.2/2 Ton Split type room air conditioner machine (1:1) with rotary compressor and having 2 star (2023) rating as per BEE or as per model mention below with 410A refrigarent and cordless LCD remote including refrigarant copper pipe line and connecting copper wire Spcification(MAKE-HITACHI/Daikin/ O'General/ Mitsubishi Electric) : A)Cooling capacity nominal (BTU):24000. B) Star - 2 Star C) Rated Voltage -230v +/- 5%. D) Compressor Type - Rotary as supplied with AC machine as per direction of EIC (MAKE-HITACHI/O'General/Daikin/Mitsubishi Electric) PCB Board of Indoor unit should be placed with in the metal Box.(For CNC Lab)

Installation of 2.0/2.2 Ton capacity split type Air conditioner machine with S& F MS base plate, flastner,gutka,screws etc. nuts, bots & washers for outdoor unit as per direction of EIC.

S/F 4 core 2.5sqmm PVC cu cable for connection between indoor & outdoor units. (polycab/kei/Gloster/mescab).

S/F 3 core 4sqmm PVC cu cable for connection between indoor & outdoor units. (polycab/kei/Gloster/mescab).

S& F of extra cooling cooper tube and cubee foam from inner unit to outer unit(condensing unit) a) 5/8" dia copper tube(ISI mark heavy gauge)with insulation with cubee foam and necy taping arrangement as per direction of EIC.

b) 1/4" dia copper tube(ISI mark heavy gauge)with insulation with cubee foam and necy taping arrangement as per direction of EIC.

S&F 25A A.C machine plug top (Make:Legrand/Anchor/Havels)(Black/Gray colour)

Supply & Fixing PVC drain pipe medium type (Make:Supreme/Astral).

Add GST @18% On total from item no 1 to 39.

Add LWC @1% On total from item no 1 to 40.