Public Works Department Tender

Grading – III Pakur variety Stone Chips Use 26.5mm chips @ 0.4480 m3/m3, 5.6mm chips @ 0.5760 m3/m3 & Medium sand @ 0.2560 m3/m3

Wet Mix Macadam Base Course Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs for lighting, guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). Pakur variety Stone Chips Use 26.5mm chips @ 0.3960 m3/m3, 13.2mm chips @ 0.2640 m3/m3, 5.6mm chips @ 0.3564 m3/m3 & Stone dust with grit @ 0.3036 m3/m3

Prime Coat Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). For WBM / WMM Surface: with primer @ 0.85 kg/sqm Cost of Bitumen Emulsion( SS-1 Type ) (Packed)

Tack Coat: Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). On Bituminous Surface treated with primer {Using cationic bitumen Emulsion (RS-1) packed type @0.225 Kg./M2}

Bituminous Macadam using Hot Mix Plant (HMP) Providing and laying bituminous macadam with Hot Mix Plant using approved crushed aggregates of specified grading as per Table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature with paver finisher to the required grade, level and alignment and rolled with suitable power roller for break down, inter-mediate and finished rolling as per specification to achieve the desired compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per Clause 504 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). For Grading 2 (19 mm nominal size, 50-75 mm thick.) Using Drum mix Type HMP of minimum capacity 40-60 TPH. Pakur variety Stone Chips Use 22.4mm chips @ 0.4241 m3/m3,13.2mm chips @ 0.2827 m3/m3, 11.2mm chips @ 0.3534 m3/m3, 5.6mm chips @ 0.2121 m3/m3 & Stone dust with grit @ 0.1414 m3/m3 Cost of Bitumen bulk (VG-40) @ 75 kg/m3

Semi-dense Bituminous Concrete Providing & laying Semi-dense Bituminous Concrete (SDBC) as wearing coarse by Hot Mix Plant, using coarse aggregates, fine aggregates, filler materials and binder of required specification and grading as per approved job mix formula, over thoroughly cleaned surface coated with tack coat, including screening, cleaning of aggregates, mixing the components as per approved Job Mix Formula with hot binder, carrying the mixture by tipper truck or any other approved suitable arrangements, laying the mixture uniformly, maintaining the specified laying temperature, thorough rolling with power roller with necessary hand packing and pinning to give an uniform surface to achieve the desired density of at least 98% of that of Laboratory Marshall specimen, including the cost and carriage of aggregates, filler and binder, heating the binder, preheating the aggregates, and filler to the specified temperature, including the hire charges of Hot Mix Plant and other machineries, pay of operators, cost of fuel and lubricants and all other incidental charges complete. For Grading 2 (10 mm nominal size, 25 mm thick.) Using Drum mix Type HMP of minimum capacity 40-60 TPH. Pakur variety Stone Chips Use 11.2mm chips @ 0.1462 m3/m3, 5.6mm chips @ 0.8769 m3/m3, Stone dust with grit @ 0.4092 m3/m3 & Lime/Cement filler @ 44 kg/m3 Cost of Bitumen bulk (VG-40) @ 115 kg/m3

Add GST @ 18% on Rs.6145250.00 i.e. total amount over item 1 to 8

Add Cess @ 1% on Rs.7251395.00 i.e. total amount over item no. 1 to 9