Public Works Department Tender

b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes . A)2.5 sq.mm

Overhauling,servicing& Commissioning of existing 200 KVAR APFC pannel with all necessary arrangement & providing Test Certification/ Fit certificate.

Supply & fixing of indoor type insulated ring type low tension current transformer on existing LT Panel of following rating with all necessary Cu wiring ,arrangements as per direction of EIC. 500/5A 15VA, Cl 1.0

Supply & fixing of 22.5 mm dia LED indicating lamps (R,Y,B) with all necessary connection on existing LT Panel as per direction EIC.

Supply & fixing of 0 to 600V range moving iron type analog AC voltmeter on existing LT panel as per direction of EIC with all necessary connection(accuracy class 1.5), model-SMI-96

Supply fixing of voltmeter selector switch Votage between phases with OFF, 4 Pos. 90° angle of throw on existing LT Panel with all necessary connection (OFF-RY-YB-BR)

Supply & fixing of 3 phase LED Ammeter (Cl 0.5) on existing LT Panel with all necessary connection as per direction of EIC. [Make:L&T,Cat WL131020OOO]

Supply & fixing of Acrylic SMD singage Board as referenced bellow. ACP with imported Acrylic singage Exterior 4mm Aludecore ACP board with 3mm male,female Acrylic letter with Samsung/GE defuse module LED light with rain proof power supply fitting by good quality iron structure. Item details- i) S& F 4mm thick blue ACP sheet (Dimension 80 sqft. aprox). ii) S& installation of 6'' depth box type MS structure 40mmx40mm MS square pipe 3mm thick fram with back side & four side covered by MS sheet incl. Aluminium channel & fixing arrangement.(80 sqft aprox) iii)S&F of special type of imported 3mm thick Acrylic letter of suitable size fixed on ACP sheet after router cutting the ACP.Nos of Letters & Various Letter sizes incl. Logo would be done as approved by the competent authority. (iv)Nos of LED inside Letters & Logo will be fixed as per Letters' & Logos' size as required.The specification of the same is given below: A) LED:- white- samsung module with lense. B) Type: Double line, fixed. C) Life: 70,000 burning hours. D) intensity: Uniform & smooth throughout, without dark patches. E) Visibility: 30 mtr at least for normal eye. F) Power Supply:83Amp (Meanwell SE-1000-12. G) Ambient Air: 0-50°c. 100% relative humidity. H) power consumption- 0.8 watt per module. I) input - 230V AC, output- - 12V DC. v) S & F of 50mmX50mmX6mm MS angle on wall as per required incl paint. vi) scaffholding arrangement of 30 ft height (approx) with bamboo and wooden planks etc as required for making & installation of the glowsign board and incl. carrying Board from work shop to site, loading,unloading and vice-versa.

Supply & delivery of 1.1 KV grade 3 core 4 sq. mm XLPE insulated Aluminiuim unaramoured Cable. [Make: Gloster/Havelle/KEI/MESCAB/Polycab]

Laying of 3 core 4 sqmm cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supply & fixing Timer ControlUnit assembled with following accessories:- (i) 12 Way SPNDB Box (Make:- L&T/Cabtree/Legrand/Simens/ABB)------1 no. (ii) 40 A DP MCB Isolator-----1 no. (iii) Digital 24 hrs Time Switch)------ 1 no. (iv) 32 A, 2 Pole Power Contractor---- 1 no. (v) Centre off 2 way Toggle switch---- 1no. (vi) 32 A Barrier type Terminal----- 1 no. (vii) LED indicating Lamp----1 no. All control circuit wiring would be made by 2 x 4 + 1 x 2.5 sqmm FR stranded Cu wire (Brand- Gloster/KEI/RR kable) of suitable length maintaining colour code incl. taping, socketing to complete the work.

Extra on erection of existing pole providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Supply and Fixing of Junction box (250x200x105mm) with Front side opening door and Earth stud,locking arrangement with clamp(Mk- Syntex-GSJB2520/equivalent). Junction box having following accessories- i) 2 way 32A Stud type power Terminal- 1 no(Mk.- Reputed) ii)6A SP MCB, 'C' curve, 10 kA. (Mk- L &T/ Legrand /ABB) -l no

Supply & Delivery of 45-50Watt LED Flood light luminarie IP 66,made up of pressure die cast aluminium housing with Toughened glass/ PC cover provided with high power LEDs and secondary optics PMMA lens and Silicon filled BIS registered Potted Vibration proof Driver with built in 4 KV surge protection and 10 KV external SPD with Efficacy12O lumen/watt or better, Impact resistance-IK10/IK08,CRI 70, CCT 5700K. Make:- Wipro Ranger/Crompton, Rover/ Bajaj,GLATT/ PANASONIC Flano/ Havells JETA LEGANZA} Driver Mk.- Philips Signify/Wipro / Xitanium / Inventronics. LED Chip mk.-Nichia,Cree,Osram, Lumiled.

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supply and Fixing of Post Top latern with necessary fixing arrangement as required as per direction of EIC. (Make:Havells , cat no. RUBYPT25WLED830SSYMTOPC/equivalent to crompton/Philips)