Public Works Department Tender

4 Sq mm [ 9(ii)/ F-5 ]

6 Sq mm [ 9(iii)/ F-5 ]

SUB HEAD 2 -- BDB,PDB,VTPN ETC Supplying and fixing Changeover switch with Sheet Steel enclosure on flat iron frame on wall with nuts bolts etc 32 A, 240 V, DP Changeover Switch (Make-Havells) [ 2(a )/D-1 ]

32 A, 415 V, FP Changeover Switch (Make-Havells) [ 2(a )/D-1 ]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. -- 2 Way [ 11/D-9 ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs as per GS. -- 6-32 A SP MCB [ Make - Legrand ] [ 7/D-6 ]

32 A DP MCB [ Make - Legrand ] [ 7/D-6 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs as per GS. -- 63 A FP [ Make - Legrand] [ 6/D-5 ]

SUB HEAD 3 -- SUPPLY OF CABLES Supply & Delivery of 2 Core PVC/XLPE Insulated & Sheathed Armoured Aluminium Conductor Cables for Working Voltage up to 1100 Volts of following sizes. [ Make - Polycab/Gloster/RR Kabel ] 2 core 10 Sq mm. cable. [ NS ]

Supply of 4 Core PVC/XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes. [ Make - Polycab/Gloster/RR ] 4 core 10 Sq. mm Cable. [ NS ]

SUB HEAD 4 -- LAYING OF CABLES Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as per GS. -- [ 2(a)/F-1 ] [ For 2 core 10 Sq mm. ]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and paintingas per GS. -- [ 2(b)/F-1 ] [ For 4 Core 10 Sq mm. ]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damagesas per GS. -- From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. [ 5(i)/F-3 ] [ For 2 core 10 Sq mm. & 4 core 16 mm. ]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre as per GS. -- [ 1(a)/F-2 ] [ For 2 core 10 Sq mm. ]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring as per GS. -- 2 core 10 Sq mm. cable gland. [ 7(a)/F-4 ]

4 core 10 Sq mm. cable gland. [ 7(c)/F-4 ]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make) as per GS. 2 core 10 Sq mm. cable [ 8(b)/(iii)/F-5 ]

4 core 10 Sq mm. cable [ 8(b)/(xi)/F-5 ]

SUB HEAD 5 -- FIXING OF LIGHT FITTINGS Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required. [ 14(d)/C-2 ]

SUB HEAD 6 -- SUPPLY OF LIGHT FITTINGS Supply & delivery of Single LED Fitting (20 watt, 230 V AC, 50 Hz, 6500K CDL, THD 10%, built in 2.5 KV SPD) with all accessories and 1 no. LED Tube, as directed by EIC, Luminious efficacy 105 & 120 Lumen/watt. The LED luminaves & accessories shall have BEE certification. (Make- Philips (Signify)/ Crompton/ Wipro)

SUB HEAD 7 -- COMPOUND LIGHTS AND FEEDER PILLAR Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire as per GS. [ 18/ C-3 ]

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. ( 250 x 250 x 100mm ) [ 16(b)/I-2 ]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmmPVC/A cable and having lined with rubber gasketted GI top coverwith brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. as per GS. -- [ 5/H-5 ]

S & F of Compound Light Timer Control Box with Double door 10 Way SPNDB enclosure on wall as per -- ( Make - L&T) incl. interconnection with suitable size of PVC insulated copper wire and neutral link & proviosion for earthing attachment. incl. proper socketting with required size of copper lugs and following accessories -- i) 240/415 V, 32 A DP MCB of Breaking Capacity 10 KA & ''C'' Charecteristics ( Make - L&T ) - 1 nos. ii) 25 A, 2 Pole Power Contactor with 220 coil voltage ( Make -L&T, Cat no - MNX - 25 - 2P, ) - 1 nos. iii) Digital Time Switch ( Make - L&T, Cat No - Crono 67DDTO ) -1 nos. iv) One no. Red and One no. Green 240 V LED indicator lamp for indicating purpose of Auto & Bypass indication ( Make -- L&T ) v) Auto/Manuual Toggle Switch -- 1 nos vi) S & F 4 way terminal lead on existing enclosure over the pvc insulated chairs with necy. nuts, bolts & washers. -- 2 nos. [ NS ]

S&F of 415V 3Ph Timer DB [equivalent of 14 way SPN DB] with sheet steel enclosure, pnosphitised powder coated neutral bar, DIN rail with IP-43 potection comprising with 1 no. 40A FPMCB Isolator, 3nos. 6-32A SPMCB ('C' curve 10KA), 1no. Programmable Digital time switch-24 hrs with minimum switching of 15 minutes and 1 no. 32A 3-Pole power contractor with auxilary contactor inner- outer plate & internal wiring by suitable size of cu. wire incl. 1 no. Auto- Manual bypass toggle switch, start stop puss buttan switch and provision for earthing attachment, incl. LED indication light for running, condition with mechanical locking arrangement, as directed by EIC. [Make-Legrand/Siemens/Schneider/ABB/L&T](NS)

Supply & Delivery of Street light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD10%, PF 0.95, BIS approved silicon filled potted driver, minimum LPW : 110 lumen/watt and minimum system output 7700 lumen suitable for use with 230 Volt, 50 Hz. ( Make - Phillips(Signify)/Crompton/Havells/Wipro) Colour - White (The manufacturer warranty should not be less than 3 years & warranty certificate to be provided)

Supply & Delivery of Street light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD10%, PF 0.95, BIS approved silicon filled potted driver, minimum LPW : 110 lumen/watt and minimum system output 11000 lumen suitable for use with 230 Volt, 50 Hz. ( Make - Phillips (Signify) /Havells/Wipro/Make - Crompton Greaves,) Colour - White (The manufacturer warranty should not be less than 3 years & warranty certificate to be provided)

Supply & Delivery of Flood light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD10%, PF 0.95, BIS approved silicon filled potted driver, minimum LPW : 110 lumen/watt and minimum system output 5500 lumen suitable for use with 230 Volt, 50 Hz. ( Make - Phillips (Signify)/Crompton/Havells/Wipro) (The manufacturer warranty should not be less than 3 years & warranty certificate to be provided)

Supply & Fixing of Decoretive LED 40 watt glare-free Post top lantern with IP 65 protection incl. Pipe Bracket Grouted on Gate Coloumn and other accessories (Make -Philips(Signify)/Wipro/Crompton) complete with all accessories. (The manufacturer warranty should not be less than 3 years & warranty certificate to be provided)

SUB HEAD 8 -- MISCELENEOUS Dismantalling of the existing old electrical wiring from old existing outdoor fittings - fixtures etc. and mending good the damages as required as per direction of EIC. [ NS ]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. -- 40 mm dia [ 11(c)/F-6 ]

50 mm dia (For Post Top lantern) [ 11(d)/F-6 ]

SUB HEAD 9 -- EARTHING Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil [ 1(a)/G-1 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI - Medium GI Pipe [ 2(a)/ G-1 ]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid G.I. wire -- No. 4 SWG GI wire. [ 5(a)/(i)/G-2 ]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [ 4(b)/G-2 ]