Public Works Department Tender

Checking, ,Installation, Testing and Commissioning of VDS approved addressable Manual Pull Station -Single Action with back box and Break Glass Rod, shall be resettable by Align key to avoid unauthenticated restorations with extra acceesories as required. (Approved Make: Honeywell-Esser)

Supply ,Installation, Testing and Commissioning of VDS/UL/LPCB approved Addressable Multi Sensor - Smoke cum Heat detector with ROR features to raise an alarm when the temperature reaches 11.1°per Minute with base with Binary coded address setting. Dual LED’s for 360° visibility. Polarity free, Sleek low-profile housing design. Regular 100mm base as required. (Approved Make: Honeywell-Esser/ Honeywell-Notifire/ Siemens-Cerberus Pro/ Ravel/ Secutron/ Bosch/ Edwards/ GST/ Jhonson Control/ Securiton/Notofire)

Supply ,Installation, Testing and Commissioning of VDS/UL/LPCB approved addressable Manual Pull Station -Single Action with back box and Break Glass Rod, shall be resettable by Align key to avoid unauthenticated restorations with extra acceesories as required. (Approved Make: Honeywell-Esser/ Honeywell-Notifire/ Siemens-Cerberus Pro/ Ravel/ Secutron/ Bosch/ Edwards/ GST/ Jhonson Control/ Securiton/Notofire)

Supply ,Installation, Testing and Commissioning VDS/UL/LPCB approved of addressable type loop sounder wall mounted type rated at 100 ± 5 DBA @ 1m for Audible annunciation, Fire Sires Sound, Indoor type IP40, ABS plastic as required. (Approved Make: Honeywell-Esser/ Honeywell-Notifire/ Siemens-Cerberus Pro/ Ravel/ Secutron/ Bosch/ Edwards/ GST/ Jhonson Control/ Securiton/Notofire)

Supply, installation, Testing and commissioning of Response Indicator Alarm status is indicated By Red color LED, Operates on 12 VDC, Dual LED’s for 360deg visibility, Flush / Ceiling wall mount, Operating Voltage : 12 VD.C, Operating Current : 10mA, Alarm Indication : RED LED with extra acceesories as required. (Approved Make: Honeywell-Esser/ Honeywell-Notifire/ Siemens-Cerberus Pro/ Ravel/ Secutron/ Bosch/ Edwards/ GST/ Jhonson Control/ Securiton/Notofire)

Supply ,Installation, Testing and Commissioning of Addressable fully networkable fire alarm control Panel VDS/UL/LPCB approved 1 Loop expendable upto 4 Loop capacity with each loop card wich will have 250 devices of both detectors and modules in a single line circuit on any combination, SLC should supports both Class A and Class B wiring. Shall have an LED indication for FIRE, Normal and Redundancy conditions which consists of display board which will have 160 Character Display with Touch key pad, Mother board which will have ARM CORTEX M3 32 Bit Processor, Inbuilt RS-485 Networking Circuit for peer to peer networking, Inbuilt USB 2.0 Port for upload and download the Configuration tools, Two inbuilt programmable inputs, Two inbuilt NAC's, and Three Programmable Relays. power Supply Board, having minimum 1000 event memory, which will have SMPS fully protected board, which its operates on 120 to 220V AC ± 10% with 50/60 Hz, battery backup 24V DC with built-in charger. the panel have IP-50 rating complete as required and as per specification. (Approved Make: Honeywell-Esser/ Honeywell-Notifire/ Siemens-Cerberus Pro/ Ravel/ Secutron/ Bosch/ Edwards/ GST/ Jhonson Control/ Securiton/Notofire)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire ((Gloster/ Finolex/ Polycab)) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required [Page No. E-14, Item No.1(a)]

2 x 22/0.3 (1.5 sqmm) ECC)

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST & CESS. (ii) All materials, equipments & accessories must conform to relevant IS / IEC specifications. (iii) Necessary manufacturer's warranty certificate will have to be submitted during handover of the site.