Public Works Department Tender

ii) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

iii) 2 x 4 sqmm. + 1 x 2.5 sq.mm.

iv) 4 x 16 sqmm + 2 x10 sq.mm for interconnection of Bus Bar

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes [PWD/GS Page: F-5 Item: 9 ]

i) 2 x 1.5 sqmm. + 1 x 1.5 sq.mm.

ii) 2 x 2.5 sqmm. + 1 x 1.5 sq.mm.

iii) 2 x 4 sqmm. + 1 x 2.5 sq.mm.

iv) 4 x 16 sqmm + 2 x10 sq.mm for interconnection of Bus Bar

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [25/E-7]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 1200 mm, T8, 20 W, 110 lm/W single LED light fitting incl. LED Tube light (Fibre Body), suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [Supply of light fittings/Light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 17 ] [Make HPL Model HPLLEDT8PC18 (CW) /Philips/ Wipro/Osram] with submission of test report and warranty certificate for atleast two years

Supply & Fixing of 240 V, 1200 mm,T8, 2x20 W, 110 lm/W double LED light fitting incl. 2 nos. LED Tube light (Fibre Body) , suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [Supply of light fittings/Light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 17 ] [Make HPL Model HPLLEDT8PC36(CW) or equivalent model Philips /Wipro /Osram]with submission of test report and warranty certificate for atleast two years

Supply and delivery of following 1.1 KV grade XLPE armoured cables ( Make Polycab/Havells/Kei) with submission of test report and warranty certificate for atleast two years

(i) 2 Core 6 sqmm

(ii) 4 Core 16 sqmm

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

(i) 2 Core 6 sqmm

(ii) 4 Core 16 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

(i) 2 Core 6 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

(i) 2 Core 6 sqmm

Supply & Fixing 240 V, 100 W, 100/110 lm/W LED Flood light and complete with all accessories incl. mending the damages as directed by EIC. [Supply of light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 13 ] Make-HPL Model HPLLEDFL10060F or equivalent model of Philips/Wipro/Jaguar) with submission of test report and warranty certificate for atleast 5years.

Supply & Fixing 240 V, 72 W, 100/110 lm/W LED Street light and complete with all accessories incl. mending the damages as directed by EIC. Make-HPL Model HPLLEDSL7260E or equivalent model of Philips/Wipro/Jaguar) with submission of test report and warranty certificate for atleast 5years.

Earthing Installation – with Pipe Electrode : Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil [PWD/GS Page: G-1 Item: 1]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below :By TATA-Medium GI pipe [PWD/GS Page: G-1 Item: 2/a]

Supplying and fixing 415V, 125A, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating as per direction of EIC.(Make-L&T,Havells,Siemens)

Supplying and fixing 415V, 125A,TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc as per direction of EIC.(Make-L&T,Havells,Siemens)

Supplying and fixing double door 4Way Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per direction of EIC( Make- Legrand/Schneider/ABB/Siemens)

Up to 160A

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection as per direction of EIC.

160 A (Make- Legrand/Schneider/ABB/Siemens)

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) as per direction of EIC.

4 Bars,415V,100/125A Al body having dimensions of 4 x 25x5mm [ 19/D-12].

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand/ Schneider/L&T/Siemens) as per direction of EIC. )

6 Way (Legrand) [ 14 / D- 10 ]

Supplying and fixing double-door SPN MCB Distribution Board (Make Legrand /Schneider/ ABB/Siemens as per the choice of EIC) with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS.

2+8way

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ Schneider/Siemens/ L&T) as per direction of EIC. ]

63A FP [ 6 / D- 5 ]

32 A DP [ 6 / D- 5 ]

6-32 SP [ 7 / D- 6]

32A TP

63 A TP

Supplying & Fixing GI waterproof type looping cable box size 100x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint as per direction of EIC.

Supply and fixing of 32mm GI pipe protection (TATA-ISI MEDIUM) as per direction of EIC.

Supply and Installation of MS fabricated outdoor type feeder pillar box having IP 66 protection having overall dimension of 1 mtr x 0.5 mtr x 0.5 mtr. The body and upper portion of the pillar box made of 2mm thick MS plate rigidly fixed by nuts. Bolts & washers etc with 25mm x 25mm x 3mm MS angle and 20 mm x 5mm MS flat. the pillar box having both side doors opening with suitable handle in each door with double looking system is to be provided with Godrej Almirah type lock with 3 nos keys Additional provision for pad locking and supply of Godrej Navtal with 2 nos mechanical locks both top and bottom portion Provision of ventilation grill should be triangular shape made with sufficient extension of outside of MS plate duly welded to lateral side. the Central ventilation spout at starting surface of the top of the pilar box. provision for 2 nos earthing terminal (20 x 5)mm Gl flat having suitable nuts. bolts & washers for connecting the accessories. necessary interconnection between incoming and outgoing switches by suitable size Cu. Flat/wire/red duly sleeved and insulated. finishing the end by socketing & providing gland as required. The Bus Bar is to be Aluminium Bus Bar 4 way Chamber with dimensions of each bar of standard size lengthand breadth 25mm x width 5 mm. The pillar box both inside & outside is to painted with two coats of Al. paint over one coat of red lead primer and s/f MS' channel of size 50mm x 25mm x 2mm with nuts and bolts at bottom portion with two coats of Black enameled paint after finishing the surface properly. the internal EI works of pillar box should be with stand 2 KV for one minute. the all fabrication work should be done as per direction of EIC. A) Incoming Arrangement: i) S & F 415 V,100A TPN SFU With S.S Enclosure with 3 nos Din type HRC FUSE---- 1 no. (Make: L&T/Siemens/Havells/HPL) ii) S & F 415 V,100A Al Busbar---- 1 no.

B) Outgoing arrangement: i) S & F 415 V, 32 A TPN SFU with S.S encloser with 3 nos din type HRC Fuse ----- 2 No.s (Make: L&T/Havells/HPL/Schneider) ii) S & F 230 V SPNDB (2+8 Way) with one no. 32A DPMCB as incomer with outgoing 8 No.s of 10A SPMCB ---- 1 No.s (Make: Legrand/Havells/HPL/Schneider) (iii) S & F Single phase Astronomical timer, contactor and allied components of timer circuit (Make: Legrand /Havells /HPL/ Schneider) C) Bus Bar arrangement: 500V, 100 Amps Capacity 4 bars of equal size suitable size of sheet metal box Epoxy bus support and Different colour tapping --- 1 No D) Gen Next LED indicator 11.5 mm ( Make L&T. CAT- EIL) RED -- 1 No.s E) Gen Next LED indicator 11.5 mm (Make L&T. CAT- EIL) GREEN -- 1 No.s F) Gen Next LED indicator 11.5 mm (Make L&T. CAT- EIL) BLUE -- 1 No.s G) S & F E.I Danger Board (3'x4")- 2 No.s H) S & F Measurement Digital Meters for three phase measurements of suitable size ( 1 No. Ammeter (0 - 100 A range), 1 No. of Voltmeter (0 - 500 V range) & 1 No. frequency meter) ( All meters Make AE/ L&T) Erection of feeder pillar box of above size on concrete cement base of size 600x 2500 x 100 m.m. height 300 m.m. below ground level and 600 m.m. above GL) inclusive sand cement plastering and neat cement finishing. Inside the brick pedestrian will be filled up by loose sand where the incoming and outgoing table will be rest as per direction of EIC

Painting of ST Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. - H-2/ 4.a. Upto 9.0 mtr. long pole

1st coat of aluminium paint over 1 coat of RO priming

2nd coat of aluminium paint over 1st coat

Add 18% GST (on Item No. 01.00 to 27.02).

Add 1% CESS (on Item No. 01.00 to 28.00).

N.B.: 1) Sl. No. 28.00 is variable depending on the total cost of the actual work on which 18% GST to be calculated during measurment of the work (Item No. 01.00 to 27.02). 2) Sl. No. 29.00 is variable depending on the total cost of the actual work on which 1% CESS to be calculated during measurment of the work (Item No. 01.00 to 28.00).