Public Works Department Tender

Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications. E PCC Grade M30 I) Using concrete mixer

Supplying and laying polythene sheet (150 gm/sqm) over damp proof course or below flooring or roof terracing or in foundation trenches.

Supplying and laying in the specified pattern of Interlocking Concrete Black pavements (ICBP) with concrete grade as specified as per Table I of IS 15658:2006) manufactured in steel mould clamped to a vaibrating table by hydrulic presssure (as per cl no. 6.30 of IRC :SP:63 (2018), from BIS license manufacturer, with spacer nib (Small protruding profiles onteh vertical face of apaver block used as a device for keeping minimum joint gap in between the paving blocks, as per Cl. Bo. 3.26 of IS: 15658) and specified size and shape with aspect ratio (The raito of length to thickness of a paver block, asp per Cl. No.3.3 of IS: 15658) as per Table 2 of IS : 15658 with flexural strength/breaking load as per Annexure G of IS:15658, with flexural course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushionof compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and completing the edges with cut blocks as per CL No. 8.7 of IRC SP-63(2018) and filling up of the edge gap. 120 mm thick

GST @ 18% on Item no 1 to 6

Labour Welfare Cess @ 1% on Item no 1 to 7