Public Works Department Tender

Brick work with 1st class bricks in cement mortar (1:6) In foundation and plinth

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). With 1:4 cement mortar; 20 mm thick plaster

Taking out existing Cement Concrete Interlocking Paver Block from Road/Footpath and relaying the same of any design/shape in required line, level, curvature, color and pattern over and including 50mm thick compacted bed of course sand, filling the joints with fine sand etc. including disposal of unservicable materials all complete as per direction of Engineer in Charge.

Wet Mix Macadam Base Course; Providing, laying, spreading and compacting graded stone aggregate (Pakur variety) to Wet Mix Macadam specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials,machinery, fuel and lubricants, including incidental costs for lighting, guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

Supplying and Laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks (with concrete grade as specified as per Table 1 of IS 15658:2006) manufactured in steel mould clamped to a vibrating table by hydraulic pressure (us per cl. no. 6.30 of IRC : SP : 63 (2018), from BIS licensee manufacturer, with spacer nib (Small protruding profiles on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per CL No 3.26 of IS: 15658)and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block, as per Cl. No. 3.3 of IS: 15658) as per Table 2 of IS :15658 with fles-ural strength/breaking loud as per Annexure G of 15:15658, on the prepared base course if specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand us per clause 6.5.1 of IRC SP-63) and filling up the gaps in between paver blocks with joint filling sand grading of the joint filling sand will be as per clause 6.5.2 of IRC SP 63) and(the completing the edges with cut blocks as per CL No. with proper confinement of bedding and joint filling sand. compuctiondevelling and filling up of the edge gap. 100 mm thick, Coloured Grey

SUB TOTAL

GST @ 18% over Sl. No. 1 to 8

Labour Welfare Cess @ 1% over Sl. No. 1 to 10