Public Works Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Public Works Department - PWD Tender
Electrical and Electronics
Eprocure
Opening Date15 Jan 2025
Closing Date10 Feb 2025
Tender AmountRefer Documents
Costs
EMD
₹ 7,07,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WBPWD_801515_1Tender No
WBPWD/CEC/NIT/03/Q/24-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://wbpwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
BUSBAR
The spacious bus bar compartment is provided on the top of the cubicle. The main bus bar can carry current upto 800A and are made of electrolytic grade copper & shall be vertically placed one after another. The bus bars should be air insulated but must be HT PVC sleeved or heat shink insulated & color coded for R-Y-B. No live parts should be accessible. All joints should be insulated covered and color coded for easy identification.
-
-
-
... More
BREAKER
The vacuum circuit breaker is mounted on a truck and is of horizontal isolation and horizontal drawout or Vertical isolation & horizontal drawout type having a robust motorized mechanism. The spring charge cycle duty of mechanism is O-C-O. The vacuum circuit breaker is single break design and have one vacuum interrupter per phase. The minimum operational life of the vacuum interrupter is 30,000 mechanical, 10,000 electrical at rated current & 100 at rated short circuit current. The breaker is having auxiliary switch 6NO+6NC. [OEM test Certificate for quality assurance to be provided]
-
-
-
... More
EARTHING
A continous GI earth bus runs across the entire length of the switchboard. All doors partitions, covers and non current carrying metallic parts are earthed to achieve earth potential for the entire enclosure. Terminals are provided at each end of the earth bus to connect the grid earthing.
-
-
-
... More
INTERLOCK
The circuit breaker can be operated only in service/test position and not in any intermediate position, beside fully isolated condition.The circuit breaker cannot be inserted into service position in closed condition and cannot be removed from service unless it is in open condition. The circuit breaker cannot be moved from test position to service position unless auxiliary plug is disengaged and vice versa in service possition auxiliary plug should be in engaged condition.If earth switch is provided it shall be mechanically interlocked with the breaker so that both the devices can not be 'ON' simultaneously.
-
-
-
... More
TESTING
The fully assembled switch board shall be offered for routine testing as per provision of IS 3427. The manufacturer should submit closing & tripping time curve after testing on a breaker analyzer. For major boughtout components like CT, PT, meters & relays the routine test certificates of the respective manufacturers need to be submitted.
-
-
-
... More
THREE PANEL VCB COMPRISES OF :
(A) 1 No Incomer Panel equipped with 800A Vacuum Circuit Breaker with the following accessories:
a) 3 Phase Delta -Star , 3 limb draw type line PT 11KV/110V, 100VA Cl - 1 with fuses for primary & secondary circuit - 1 no.
b) Epoxy Cast, Dual Core Delta/Y-Y CT having CT ratio 75-100/5/5 A with CORE1:15VA, Class -1.0 CORE2:15VA, Class - 5P10, STC - 26KA for 1 sec- 3 nos.
c) Shunt Trip Coil of 110V DC- 1 no.
d) LED type indicating lamp for VCB ON/OFF, CB Trip, Springe Charge, Trip Ckt Healthy- 5 nos.
e) LED type RYB Phase indication lamps-- 1 set
f) Cubicle Panel illumination lamp.- 1 set
g) Push Button for Emergency Trip- 1 no.
h) Digital Voltmeter with selector switch- 1 no.
i) Digital Ammeter with selector switch--- 1 no.
j) Digital Multi Function Meter- 1 no.
-
-
-
... More
i) Combined Numerical Relay of SCADA-compatability incl. providing necessary software with following protection function:-50, 50N, 51, 51N, 37, 46, 46BC, 49, 50BF, 64N, 68, 86 and 95 with programmble in-built LED indicating lamp --- 1 set.[MAKE-ABB,SIEMENS, L&T] with programmble in-built LED indicating lamp --- 7 sets of LED (01-Power ON, 02-Pickup, 03-R, 04-Y,05-B, 06-E/F, 07-High set) m) Master Trip Relay - 1 no.
n) Trip circuit Supervision relay --- 1 no. o) Antipumping relay -- 1 no. p) 6/8 Window Annunciator -- 1 set
q) Trip -Neutral -Close/Spring Charge Motor On/Space Heater On- Switch- 3 set.
r) MCB for control supply-AC/DC -- 2 sets
s) HRC control fuse & link as per scheme-- 1 set t) 110V DC Hooter- 1 no.
u) Power Pack with 220 Volt AC input & 110V DC continuous output, should be capable of taking O-C-O operation with its battery back up. Charging unit for system complete with suitable interconnection with 2.5 sq.mm FRLS insulated copper conductor cable etc as required -1 Set
v) Panel space heater with thermostat-- 1 no.
-
-
-
... More
(B) 2 Nos outgoing panel equipped with 800A vacuum Circuit Breaker with following accessories:
a) Epoxy Cast, Dual Core Delta/Y-Y CT having CT ratio 30-60/5/5A with CORE1:15VA, Class -1.0 CORE2:15VA, Class - 5P10, STC - 26KA for 1 sec- 3 nos.
b) Shunt Trip Coil of 110V DC- 1 no.
c) LED type indicatiing lamp for VCB ON/OFF, CB Trip, Spring Charge, Trip Ckt Healthy- 5 nos.
d) LED type RYB Phase indication lamps-- 1 set
e) Cubicle Panel illumination lamp.- 1 set
f) Push Button for Emergency Trip- 1 no.
g) Digital Ammeter with selector switch--- 1 no.
h) Digital Multi Function Meter- 1 no.
i) Combined Numerical Relay of SCADA-compatability incl. providing necessary software with following protection function:-50, 50N, 51, 51N, 37, 46, 46BC, 49, 50BF, 64N, 68, 86 and 95 with programmble in-built LED indicating lamp --- 1 set.[MAKE-ABB,SIEMENS, L&T] with programmble in-built LED indicating lamp --- 7 sets of LED (01-Power ON, 02-Pickup, 03-R, 04-Y,05-B, 06-E/F, 07-High set) .
Compactable with bukhholtz relay and responsive to bukhholtz operation.
j) Master Trip Relay - 1 no.
-
-
-
... More
k)Trip circuit Supervision relay-1no. l) Auxiliary relay for Transformer Wdg. temp. Alarm & Trip indication ---- 2 no. m) Antipumping relay -- 1 no. n) 6/8 Window Annunciator -- 1 set
TRIP -Neutral -Close/Spring Charge Motor On/Space Heater On- Switch- 3 set.
q) MCB for control supply-AC/DC -- 2 sets
r) HRC control fuse & link as per scheme-- 1 set s) 110V DC Hooter- 1 no.
t) Panel space heater with thermostat-- 1 no.
1
-
-
... More
11KV / 415V, OIL TYPE TRANSFORMER Supply, Installation, Testing & Commissioning of IP-43,11KV/415V, 750 KVA oil type transformer as per specification below: (Make: Crompton / BHEL/ Volt-Amp (Baroda) / kirloskar/ABB/Raychem/Schneider) Applicable Standard:- IS 1180 NEW LEVEL 1 with latest modification (if any) Rating:- 750 KVA, 3 phase, 50Hz, Delta / Star
Type:- Three phase, copper wound, oil cooled Voltage ratio:- 11000V / 415 Volt Links / Tappings:- Off circuit Links, tapping range +5% to -5% in steps of 2.5% Tap position configuration diagram shall be provided.
Cooling:- ONAN
Painting:- As per IS 5 (Painted with synthetic enamel)
Vector Group:- Delta/Star & Dyn 11
Class of Insulation:-F
Temp. rise of tap oil/winding (Degree C):- 40/45º
-
-
-
... More
Core & Coils:-The core shall be built up with high grade, non-aging, low loss, high permeability, grain oriented, cold-rolled silicon steel laminations especially suitable for core material. Grade of core should be M4 or better. The coils shall be manufactured from electrolytic copper conductor & fully insulated for rated voltage, Class F, ONAN. the manufacturer should have in-house core cutting facility & in-house testing facility incl. impulse Generator. Insulating material shall be of proven design & should be selected in such a way that the transformer will be capable of supplying 120% continuous load. Coils shall be so insulated that impulse & power frequency voltage stresses are minimum. Coil assembly shall be suitably supported between adjacent sections by insulating spacers & barriers.Suitable arrangement should be made for connection at LV&HV side through flexible copper jumper connector terminal, porcelain insulator as per latest recomended IS standard.
The core and coil assembly shall be securely fixed in position so that no shifting or deformation occurs during movement of transformer or under short circuit stresses. Transformer losses shall be guaranteed as below:-
Total loss @ 50% Loading : 2.324 KW (Max)
Total loss @ 100% Loading : 6.875 KW (Max)
-
-
-
... More
% Efficiency (Minimum):- a) At Unity PF (i) 99.08% at full load (ii) 99.25% at 75% load (iii) 99.38% at 50% load % Regulation:- a) At Unity PF (i) with full load : 1.49 (Max)
% Regulation:- a) At 0.8 PF
(iii) with full load : 3.6875 (Max) Termination HV/LV :
HV Cable Box with terminals for cable finishing ends of suitable rating.
LV Cable Box extended copper bus bar has to be provided for multiple cable finishing of suitable rating.
Testing:- All Routine tests as per relevant IS 2026 have to be conducted at manufacturer’s works. The manufacturer should have in-house test facilities and should arrange for type tests i.e. impulse test & temperature rise tests on chargeable basis, if asked for.Terminal arrangement:- HV : cable box ;. LV : LV cable box Enclosure:- Sheet steel with protection, painting should be epoxy / as per latest standard with paint shade 631 of IS-5.Basic Insulation level for HV:- 75 KV pk, class of protection -IP-55
-
-
-
... More
Temperature Scanner:- Transformer will be provided with RTDS for sensing winding temperatures & oil temperature. Dial type temparature measuTransformer will be provided withbukhholtz relay .ring devices for display of oil & winding temparature.
2
-
-
... More
LT PANEL-1 (For SS-4)
Supply and installation of L.T. cubical type fully compartmentalized distribution panel board(Raw Normal Power), having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each vertical compartment with 40 x 40x6 mm MS angle iron). The base of panel should be made with 75mm x 40mm x 4.4 mm M.S. channel. (Main LT panel comprised of two nos. 1250A, ACB, EDO as incomer , One 1250A ACB EDO as bus coupler and 1250A on load changeover switch one no. . The incomer ACB's & Bus-coupler are to be elctrically & mechanically interlocked to prevent any malfunction.) [Manufacturer/Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of this item has to approved by EIC before making of it mentioning all major technical details with specification and Make of each and individual part.
Construction Details :
All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position.
-
-
-
... More
The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system . The panel is to be properly gasketed to prevent the dust & vermin. All combination of Horizontal and vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, Aluminium multi core cables/Aluminium Bar, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection. Each compartment will be providing with DMC/FRP board at back side.
Incoming Arrangement :
i) 415 V, 1250A, 50 kA 4(four) pole electrically draw- out type A.C.B. with Microprocessor-based protection release.-2 (One) no.
(Make – L & T/ SIEMENS/ABB/Schneider) ii) 415 V, 1250A, 50 kA 4(four) pole electrically draw- out type A.C.B. with Microprocessor-based protection release.-1 (One) no. As Bus Coupler (Make – L & T/ SIEMENS/ABB/Schneider)
-
-
-
... More
iii) 415 V, 1250A, 4P On Load Changeover switch -1 (One) no. (Make – L & T/ SIEMENS/ABB/Schneider)
Buscoupler arrangement: 415 V, 1250A 4(four) pole 50 KA electrically draw- out type A.C.B. with Microprocessor-based electromechanical interlocking Arrangement. Manually operated with interlocked doors, automatic safety shutters, mechanical ON / OFF and service / test / isolated position indicators and frame earthing contact, 1 no. independent manual spring closing mechanism, 1 no. shunt trip coil 220 Volts AC, conforming to IS 13947 - 2 - 1993 as amended upto date - 1 set. The interlocking arrangement(both electrical & mechanical) should be such that in case of failure of one transformer the entire panel will be charged by one transformer after adjusting the connected load. Otherwise in normal condition the two different supply from two different transformers should be separated and accordingly load will be distributed to hospital.
Bus bar section :
500V, 1600 Amp capacity tinned 4 bar Aluminium bus bar [size of flat- 2x80 mm x 10 mm ] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped
-
-
-
... More
with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification - 1 set The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications.
Outgoing Arrangement :
a) 415V, 630A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items ----- 2 Nos. (Make – L&T/SIEMENS/ABB/Legrand/Schneider)
b) 415V,400A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items .----- 2 Nos. (Make – L&T/SIEMENS/ABB/Legrand/Schneider)
-
-
-
... More
c) 415V,315A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items----- 5Nos. (Make – L&T/SIEMENS/ABB/Legrand/Schneider)
Metering Panel
a) Multifunction Meter Digital Type Load Monitor ( (Make – L & T/ SIEMENS/ABB/Schneider) ) - 2 Nos., d) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 12 Set. e) 1250/5 Amp ratio C.T (Kappa or equivalent) --- 6 nos.
e) Supplying & Fixing 6 Amp SP MCB---- 36 nos.
f) Danger board---- 1 nos.
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size Aluminium bars or equivalent flexible pvc insulated multistranded single core Al. cable and the same between busbar to all outgoing mains and also for metering arrangements are to be made by suitable size of Copper wire with proper socketing of the end of each wire leads.
-
-
-
... More
Earthing :-
A separate continuous GI earth busbar of size 50mm x 6mm is to be placed at the inside bottom of the panel and run across the full length of the panel board atleast extended for 75 mm at both side end of panel and should have drill hole to fit in 12x50mm GI nut bolt for earth strip connection. The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C.
All incoming/outgoing switches is to be properly lebeled on Acrylic sheet as per direction of EIC.
1
-
-
... More
LT PANEL-2 (for SS-5)
Supply and installation of L.T. cubical type fully compartmentalized distribution panel board(Raw Normal Power), having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each vertical compartment with 40 x 40x6 mm MS angle iron). The base of panel should be made with 75mm x 40mm x 4.4 mm M.S. channel. (Main LT panel comprised of two nos. 1250A, ACB, EDO as incomer and One 1250A 4P On Load Changeover switch . The incomer ACB's & Bus-coupler are to be elctrically & mechanically interlocked to prevent any malfunction.) [Manufacturer/Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of this item has to approved by EIC before making of it mentioning all major technical details with specification and Make of each and individual part.
-
-
-
... More
Construction Details :
All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system . The panel is to be properly gasketed to prevent the dust & vermin. All combination of Horizontal and vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, Aluminium multi core cables/Aluminium Bar, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection. Each compartment will be providing with DMC/FRP board at back side.
-
-
-
... More
Incoming Arrangement :
i) 415 V, 1250A, 50 kA 4(four) pole electrically draw- out type A.C.B. with Microprocessor-based protection release.-2 (Two) nos.
(Make – L & T/ SIEMENS/ABB/Schneider) ii) 415 V, `1250A, 4P On Loaad Changeover switch -1 (One) no.
(Make – L&T/SIEMENS/ABB/Legrand/Schneider)
Buscoupler arrangement: 415 V, 1250A 4(four) pole 50 KA electrically draw- out type A.C.B. with Microprocessor-based electromechanical interlocking Arrangement. Manually operated with interlocked doors, automatic safety shutters, mechanical ON / OFF and service / test / isolated position indicators and frame earthing contact, 1 no. independent manual spring closing mechanism, 1 no. shunt trip coil 220 Volts AC, conforming to IS 13947 - 2 - 1993 as amended upto date - 1 set. The interlocking arrangement(both electrical & mechanical) should be such that in case of failure of one transformer the entire panel will be charged by one transformer after adjusting the connected load. Otherwise in normal condition the two different supply from two different transformers should be separated and accordingly load will be distributed to hospital.
-
-
-
... More
Bus bar section :
500V, 1600 Amp capacity tinned 4 bar Aluminium bus bar [size of flat- 2x80 mm x 10 mm ] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification - 1 set *** Bus - Bar Extension provision to be provided in this panel for inter connection between two nos Main Panel through Bus coupler arrangement. The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications.
Outgoing Arrangement :
a) 415V, 630A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items ----- 4 Nos. (Make – L&T/SIEMENS/ABB/Legrand/Schneider)
-
-
-
... More
b) 415V,400A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items ----- 2 Nos.
(Make – L&T/SIEMENS/ABB/Legrand/Schneider)
c) 415V,100 A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items ----- 1 Nos.
(Make – L&T/SIEMENS/ABB/Legrand/Schneider)
Metering Panel
a) Multifunction Meter Digital Type Load Monitor ( (Make – L & T/ SIEMENS/ABB/Schneider) ) - 2 Nos., b) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 9 Set. c) 1250/5 Amp ratio C.T (Kappa or equivalent) --- 6 nos.
d) Supplying & Fixing 6 Amp SP MCB---- 27 nos.
e) Danger board---- 1 nos.
-
-
-
... More
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size Aluminium bars or equivalent flexible pvc insulated multistranded single core Al. cable and the same between busbar to all outgoing mains and also for metering arrangements are to be made by suitable size of Copper wire with proper socketing of the end of each wire leads.
Earthing :-
A separate continuous GI earth busbar of size 50mm x 6mm is to be placed at the inside bottom of the panel and run across the full length of the panel board atleast extended for 75 mm at both side end of panel and should have drill hole to fit in 12x50mm GI nut bolt for earth strip connection. The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C.
All incoming/outgoing switches is to be properly lebeled on Acrylic sheet as per direction of EIC.
1
-
-
... More
LT Panel for Bat Tala
Supply and installation of L.T. cubical type fully compartmentalized distribution panel board(Raw Normal Power), having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each vertical compartment with 40 x 40x6 mm MS angle iron). The base of panel should be made with 75mm x 40mm x 4.4 mm M.S. channel. (Main LT panel comprised of one no 800A, ACB, EDO as incomer [Manufacturer/Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of this item has to approved by EIC before making of it mentioning all major technical details with specification and Make of each and individual part.
Construction Details :
All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system .
-
-
-
... More
The panel is to be properly gasketed to prevent the dust & vermin. All combination of Horizontal and vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, Aluminium multi core cables/Aluminium Bar, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection. Each compartment will be providing with DMC/FRP board at back side.
Incoming Arrangement :
i) 415 V, 800A, 50 kA 4(four) pole electrically draw- out type A.C.B. with Microprocessor-based protection release- 1 (one) No.
(Make – L & T/ SIEMENS/ABB/Schneider) Bus bar section :
500V, 1200 Amp capacity tinned 4 bar Aluminium bus bar [size of flat- 2x60 mm x 10 mm ] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification - 1 set
-
-
-
... More
The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications.
Outgoing Arrangement :
a) 415V, 630A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items ----- 1 Nos. (Make – L&T/SIEMENS/ABB/Legrand/Schneider)
b) 415V,400A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items ----- 4 Nos.
(Make – L&T/SIEMENS/ABB/Legrand/Schneider)
c) 415V,250A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items ----- 1 Nos.
(Make – L&T/SIEMENS/ABB/Legrand/Schneider)
-
-
-
... More
d) 415V,160A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items ----- 1 Nos.
(Make – L&T/SIEMENS/ABB/Legrand/Schneider)
e) 415V,100 A 4P MCCB Breaking capacity 25kA/35kA with fixed thermal
and fixed magnetic / adjustable thermal and fixed magnetic setting. With all necessary items ----- 2 Nos.
(Make – L&T/SIEMENS/ABB/Legrand/Schneider)
Metering Panel
a) Multifunction Meter Digital Type Load Monitor ( Make L&T/Legrand/ABB) - 1 No., b) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 1 Set. c) 800/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos.
d) Supplying & Fixing 6 Amp SP MCB---- 3 nos.
e) Danger board---- 1 nos.
-
-
-
... More
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size Aluminium bars or equivalent flexible pvc insulated multistranded single core Al. cable and the same between busbar to all outgoing mains and also for metering arrangements are to be made by suitable size of Copper wire with proper socketing of the end of each wire leads.
Earthing :-
A separate continuous GI earth busbar of size 50mm x 6mm is to be placed at the inside bottom of the panel and run across the full length of the panel board atleast extended for 75 mm at both side end of panel and should have drill hole to fit in 12x50mm GI nut bolt for earth strip connection. The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C.
All incoming/outgoing switches is to be properly lebeled on Acrylic sheet as per direction of EIC.
1
-
-
... More
Feeder Pillar box near Zoology Department
SITC of outdoor type water proof Distribution Feeder Pillar box (1200 mmx1350mm x550 mm ) conforming to Indian Standard IS : 5039- 1969 with latest amendments,suitable for use on 3 phase 4 wire, 400/440 Volts 50 Cycles A.C. Supply and shall be suitable to be fabricated as per design & drawing to be approved by EIC. The Enclosure shall provide Degree of protection IP -66 respective Indian standard (IS). [Manufacturer/Fabricator having Test Certificates from CPRI]
The body will be fabricated with 3mm thick MS plate, MS angle ( 50X50X5) & MS Flat ( 50X6 ). The top of the box will be fitted with a sloping canopy made out of 3 mm thick sheet steel. It will have double hinged door at the front and back with suitable locking arrangement (Godrej Type ) and provision for manual locking arrangement also.
Incoming arrangement -i) 415 V 630 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it (Siemens/ L &T/ Havels/ABB) :- 1no
-
-
-
... More
Bus bar section :
500 V, 1000 Amp capacity 4 bar Aluminium bus bar (2x50mm x 5mm) mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification- 1 set. B) Outgoing arrangement-
i) 415 V 400 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 4 no.
ii) 415 V 315 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 1no.
(Make – L & T/ SIEMENS/ABB/Schneider) Metering Panel
a) Multifunction Meter Digital Type Load Monitor (Make – L & T/ SIEMENS/ABB/Schneider) - 1 No., b) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 1 Set. c) 630/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos.
-
-
-
... More
d) Supplying & Fixing 6 Amp SP MCB---- 3 nos.
e) Danger board---- 1 nos.
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size electrolytic tinned copper bars or equivalent flexible pvc insulated multistranded single core Cu cable and the same between busbar to each outgoing mains and & for metering arrangements are to be made by suitable size of Copper with proper socketing of the end of each wire leads.
Earthing Arrangement :-
A separate continuous aluminum earth busbar of appropriate size is to be painted at the inside bottom of the panel and run across the full load of the Feeder Pillar Box. All electrical equipment are to be properly earthed with suitable size G.I. strip.
The complete Feeder Pillar Box is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete feeder pillar box board is to be installed on suitable brick padestal as directed by the E.I.C.
1
-
-
... More
Feeder Pillar box near MBBT Department
SITC of outdoor type water proof Distribution Feeder Pillar box (900 mmx1300 mm x550 mm ) conforming to Indian Standard IS : 5039- 1969 with latest amendments,suitable for use on 3 phase 4 wire, 400/440 Volts 50 Cycles A.C. Supply and shall be suitable to be fabricated as per design & drawing to be approved by EIC. The Enclosure shall provide Degree of protection IP -66 respective Indian standard (IS). [Manufacturer/Fabricator having Test Certificates from CPRI]
The body will be fabricated with 3mm thick MS plate, MS angle ( 50X50X5) & MS Flat ( 50X6 ). The top of the box will be fitted with a sloping canopy made out of 3 mm thick sheet steel. It will have double hinged door at the front and back with suitable locking arrangement (Godrej Type ) and provision for manual locking arrangement also.
Incoming arrangement -
i) 415 V 400 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it (Make – L & T/ SIEMENS/ABB/Schneider) :- 1no
-
-
-
... More
Bus bar section :
500 V, 600 Amp capacity 4 bar Aluminium bus bar(2 x 40mm x 5mm) mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification- 1 set. B) Outgoing arrangement-
i) 415 V 250 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 2 nos.
(Make – L & T/ SIEMENS/ABB/Schneider)
ii) 415 V 200 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 2 nos.
(Make – L & T/ SIEMENS/ABB/Schneider)
iii) 415 V 160 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 1no.
(Make – L & T/ SIEMENS/ABB/Schneider)
-
-
-
... More
Metering Panel
a) Multifunction Meter Digital Type Load Monitor ( Make L&T/Legrand/ABB) - 1 No., b) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 1 Set. c) 400/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos.
d) Supplying & Fixing 6 Amp SP MCB---- 3 nos.
e) Danger board---- 1 nos.
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size electrolytic tinned copper bars or equivalent flexible pvc insulated multistranded single core Cu cable and the same between busbar to each outgoing mains and & for metering arrangements are to be made by suitable size of Copper with proper socketing of the end of each wire leads.
Earthing Arrangement :-
A separate continuous aluminum earth busbar of appropriate size is to be painted at the inside bottom of the panel and run across the full load of the Feeder Pillar Box. All electrical equipment are to be properly earthed with suitable size G.I. strip.
-
-
-
... More
The complete Feeder Pillar Box is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete feeder pillar box board is to be installed on suitable brick padestal as directed by the E.I.C.
1
-
-
... More
Feeder Pillar box near NMR Department
SITC of outdoor type water proof Distribution Feeder Pillar box (1200 mmx1350mm x550 mm ) conforming to Indian Standard IS : 5039- 1969 with latest amendments,suitable for use on 3 phase 4 wire, 400/440 Volts 50 Cycles A.C. Supply and shall be suitable to be fabricated as per design & drawing to be approved by EIC. The Enclosure shall provide Degree of protection IP -66 respective Indian standard (IS). [Manufacturer/Fabricator having Test Certificates from CPRI]
The body will be fabricated with 3mm thick MS plate, MS angle ( 50X50X5) & MS Flat ( 50X6 ). The top of the box will be fitted with a sloping canopy made out of 3 mm thick sheet steel. It will have double hinged door at the front and back with suitable locking arrangement (Godrej Type ) and provision for manual locking arrangement also.
Incoming arrangement -
i) 415 V 630 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it :- 1no (Make – L & T/ SIEMENS/ABB/Schneider)
-
-
-
... More
Bus bar section :
500 V, 1000 Amp capacity 4 bar Aluminium bus bar mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification- 1 set. B) Outgoing arrangement-
i) 415 V 400 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 2 nos.
(Make – L & T/ SIEMENS/ABB/Schneider)
ii) 415 V 315 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 3 nos.
(Make – L & T/ SIEMENS/ABB/Schneider)
iii) 415 V 160 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 1no.
(Make – L & T/ SIEMENS/ABB/Schneider)
-
-
-
... More
Metering Panel
a) Multifunction Meter Digital Type Load Monitor - 1 No., (Make – L & T/ SIEMENS/ABB/Schneider)
d) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 1 Set. e) 630/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos.
e) Supplying & Fixing 6 Amp SP MCB---- 3 nos.
f) Danger board---- 1 nos.
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size electrolytic tinned copper bars or equivalent flexible pvc insulated multistranded single core Cu cable and the same between busbar to each outgoing mains and & for metering arrangements are to be made by suitable size of Copper with proper socketing of the end of each wire leads.
Earthing Arrangement :-
A separate continuous aluminum earth busbar of appropriate size is to be painted at the inside bottom of the panel and run across the full load of the Feeder Pillar Box. All electrical equipment are to be properly earthed with suitable size G.I. strip.
-
-
-
... More
The complete Feeder Pillar Box is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete feeder pillar box board is to be installed on suitable brick padestal as directed by the E.I.C.
1
-
-
... More
Feeder Pillar box near Banyan Hostel
SITC of outdoor type water proof Distribution Feeder Pillar box (1200 mmx1350mm x550 mm ) conforming to Indian Standard IS : 5039- 1969 with latest amendments,suitable for use on 3 phase 4 wire, 400/440 Volts 50 Cycles A.C. Supply and shall be suitable to be fabricated as per design & drawing to be approved by EIC. The Enclosure shall provide Degree of protection IP -66 respective Indian standard (IS). [Manufacturer/Fabricator having Test Certificates from CPRI]
The body will be fabricated with 3mm thick MS plate, MS angle ( 50X50X5) & MS Flat ( 50X6 ). The top of the box will be fitted with a sloping canopy made out of 3 mm thick sheet steel. It will have double hinged door at the front and back with suitable locking arrangement (Godrej Type ) and provision for manual locking arrangement also.
Incoming arrangement -
i) 415 V 630 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it :- 1no (Make – L & T/ SIEMENS/ABB/Schneider)
ii) 415 V 630A on load front operated Changeover- 1 nos
(Make – L & T/ SIEMENS/ABB/Schneider)
-
-
-
... More
Bus bar section :
500 V, 1000 Amp capacity 4 bar Aluminium bus bar (2 x 50mm x 10mm) mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification- 1 set. B) Outgoing arrangement-
i) 415 V 400 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 1 nos.
(Make – L & T/ SIEMENS/ABB/Schneider)
ii) 415 V 200 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating with cable end box at one side including power coated painting on it :- 5 nos.
(Make – L & T/ SIEMENS/ABB/Schneider)
Metering Panel
a) Multifunction Meter Digital Type Load Monitor - 1 No.,
(Make – L & T/ SIEMENS/ABB/Schneider) d) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 1 Set.
-
-
-
... More
e) 630/5 Amp ratio C.T (Kappa or equivalent) --- 1 nos.
e) Supplying & Fixing 6 Amp SP MCB---- 3 nos.
f) Danger board---- 1 nos.
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size electrolytic tinned copper bars or equivalent flexible pvc insulated multistranded single core Cu cable and the same between busbar to each outgoing mains and & for metering arrangements are to be made by suitable size of Copper with proper socketing of the end of each wire leads.
Earthing Arrangement :-
A separate continuous aluminum earth busbar of appropriate size is to be painted at the inside bottom of the panel and run across the full load of the Feeder Pillar Box. All electrical equipment are to be properly earthed with suitable size G.I. strip.
The complete Feeder Pillar Box is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete feeder pillar box board is to be installed on suitable brick padestal as directed by the E.I.C.
1
-
-
... More
LT Panel for Biochemistry Biophysics
Supply and installation of L.T. cubical type fully compartmentalized distribution panel board(Raw Normal Power), having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each vertical compartment with 40 x 40x6 mm MS angle iron). The base of panel should be made with 75mm x 40mm x 4.4 mm M.S. channel. (Main LT panel comprised of one no315 A SFU as incomer [Manufacturer/Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of this item has to approved by EIC before making of it mentioning all major technical details with specification and Make of each and individual part.
Construction Details :
All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system .
-
-
-
... More
The panel is to be properly gasketed to prevent the dust & vermin. All combination of Horizontal and vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, Aluminium multi core cables/Aluminium Bar, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection. Each compartment will be providing with DMC/FRP board at back side.
Incoming Arrangement :
i) 415V, 315 A TPN Switch Disconnector Fuse unit with DIN type HRC Fuses in open execution ----- 1 Nos. (Make – L & T/ SIEMENS/ABB/Schneider)
Bus bar section :
500V, 500 Amp capacity tinned 4 bar Aluminium bus bar [size of flat- 40 mm x 10 mm ] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification - 1 set
-
-
-
... More
The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications.
Outgoing Arrangement :
a) 415V, 63A TPN Switch Disconnector Fuse unit with DIN type HRC Fuses in open execution ----- 5 Nos. (Make – L & T/ SIEMENS/ABB/Schneider)
b) 415V,100A TPN Switch Disconnector Fuse unit with DIN type HRC Fuses in open execution ----- 5 Nos.
(Make – L & T/ SIEMENS/ABB/Schneider)
Metering Panel
a) Multifunction Meter Digital Type Load Monitor - 1 No., (Make – L & T/ SIEMENS/ABB/Schneider)
d) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 1 Set. e) 315/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos.
-
-
-
... More
e) Supplying & Fixing 6 Amp SP MCB---- 3 nos.
f) Danger board---- 1 nos.
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size Aluminium bars or equivalent flexible pvc insulated multistranded single core Al. cable and the same between busbar to all outgoing mains and also for metering arrangements are to be made by suitable size of Copper wire with proper socketing of the end of each wire leads.
Earthing :-
A separate continuous GI earth busbar of size 50mm x 6mm is to be placed at the inside bottom of the panel and run across the full length of the panel board atleast extended for 75 mm at both side end of panel and should have drill hole to fit in 12x50mm GI nut bolt for earth strip connection. The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C.
All incoming/outgoing switches is to be properly lebeled on Acrylic sheet as per direction of EIC.
1
-
-
... More
Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc.
320 A. (Make- L&T/ABB/Siemens/Schneider)
1
-
-
... More
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [d-c/4/a]
320 A . (Make- L&T/ABB/Siemens/Schneider)
1
-
-
... More
Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting.
315/320A. [D-5/5]
4
-
-
... More
LT Panel for Computer Science and Engineering 1
Supply and installation of L.T. cubical type fully compartmentalized distribution panel board(Raw Normal Power), having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each vertical compartment with 40 x 40x6 mm MS angle iron). The base of panel should be made with 75mm x 40mm x 4.4 mm M.S. channel. (Main LT panel comprised of one no 400 A SFU as incomer [Manufacturer/Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of this item has to approved by EIC before making of it mentioning all major technical details with specification and Make of each and individual part.
Construction Details :
All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system .
-
-
-
... More
The panel is to be properly gasketed to prevent the dust & vermin. All combination of Horizontal and vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, Aluminium multi core cables/Aluminium Bar, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection. Each compartment will be providing with DMC/FRP board at back side.
Incoming Arrangement :
i) 415V, 400 A TPN Switch Disconnector Fuse unit with DIN type HRC Fuses in open execution ----- 1 Nos. (Make – L & T/ SIEMENS/ABB/Schneider)
Bus bar section :
500V, 600 Amp capacity tinned 4 bar Aluminium bus bar [size of flat- 50 mm x 10 mm ] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification - 1 set
-
-
-
... More
The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications.
Outgoing Arrangement :
a) 415V, 200A TPN Switch Disconnector Fuse unit with DIN type HRC Fuses in open execution ----- 4 Nos. (Make – L & T/ SIEMENS/ABB/Schneider)
b) 415V,160A TPN Switch Disconnector Fuse unit with DIN type HRC Fuses in open execution ----- 4 Nos.
(Make – L & T/ SIEMENS/ABB/Schneider)
Metering Panel
a) Multifunction Meter Digital Type Load Monitor - 1 No., (Make – L & T/ SIEMENS/ABB/Schneider)
d) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 1 Set. e) 400/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos.
e) Supplying & Fixing 6 Amp SP MCB---- 3 nos.
-
-
-
... More
f) Danger board---- 1 nos.
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size Aluminium bars or equivalent flexible pvc insulated multistranded single core Al. cable and the same between busbar to all outgoing mains and also for metering arrangements are to be made by suitable size of Copper wire with proper socketing of the end of each wire leads.
Earthing :-
A separate continuous GI earth busbar of size 50mm x 6mm is to be placed at the inside bottom of the panel and run across the full length of the panel board atleast extended for 75 mm at both side end of panel and should have drill hole to fit in 12x50mm GI nut bolt for earth strip connection. The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C.
All incoming/outgoing switches is to be properly lebeled on Acrylic sheet as per direction of EIC.
1
-
-
... More
LT Panel for Computer Science and Engineering 2
Supply and installation of L.T. cubical type fully compartmentalized distribution panel board(Raw Normal Power), having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each vertical compartment with 40 x 40x6 mm MS angle iron). The base of panel should be made with 75mm x 40mm x 4.4 mm M.S. channel. (Main LT panel comprised of one no 250 A SFU as incomer [Manufacturer/Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of this item has to approved by EIC before making of it mentioning all major technical details with specification and Make of each and individual part.
Construction Details :
All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system . The panel is to be properly gasketed to prevent the dust & vermin.
-
-
-
... More
All combination of Horizontal and vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, Aluminium multi core cables/Aluminium Bar, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection. Each compartment will be providing with DMC/FRP board at back side.
Incoming Arrangement :
i) 415V, 250 A TPN Switch Disconnector Fuse unit with DIN type HRC Fuses (Make – L&T/SIEMENS/ABB) in open execution ----- 1 Nos. Bus bar section :
500V, 400 Amp capacity tinned 4 bar Aluminium bus bar [size of flat- 50 mm x 5 mm ] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification - 1 set
-
-
-
... More
The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications.
Outgoing Arrangement :
a) 415V, 63A TPN Switch Disconnector Fuse unit with DIN type HRC Fuses in open execution ----- 4 Nos. (Make – L & T/ SIEMENS/ABB/Schneider)
b) 415V,100A TPN Switch Disconnector Fuse unit with DIN type HRC Fuses in open execution ----- 3 Nos.
(Make – L & T/ SIEMENS/ABB/Schneider)
Metering Panel
a) Multifunction Meter Digital Type Load Monitor - 1 No., (Make – L & T/ SIEMENS/ABB/Schneider)
d) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 1 Set. e) 250/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos.
e) Supplying & Fixing 6 Amp SP MCB---- 3 nos.
f) Danger board---- 1 nos.
-
-
-
... More
Interconnection :-
All interconnection between incoming main to Busbar are to be made with suitable size Aluminium bars or equivalent flexible pvc insulated multistranded single core Al. cable and the same between busbar to all outgoing mains and also for metering arrangements are to be made by suitable size of Copper wire with proper socketing of the end of each wire leads.
Earthing :-
A separate continuous GI earth busbar of size 50mm x 6mm is to be placed at the inside bottom of the panel and run across the full length of the panel board atleast extended for 75 mm at both side end of panel and should have drill hole to fit in 12x50mm GI nut bolt for earth strip connection. The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.
Installation :-
The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C.
All incoming/outgoing switches is to be properly lebeled on Acrylic sheet as per direction of EIC.
1
-
-
... More
(For Substation -2 , LT Panel Extension)
Supply & Fixing 5 (five) nos separate sheet metal ( 2mm thick) Iron Clad Cable end terminal Box on angle iron frame on wall, incl. earthing attachment and painting as required. Dimention of each compartment is 600 x 600x 200 mm .comprising of four nos 240/415 V, 630/400 A stud / Al Bus Bar (R/Y/B/N) on porcelain insulator, compression type cable gland for PVC/A cable and having lined with rubber gasketted top cover with brass machine screws etc. Drawing and Connection diagram approved by EIC.
1
-
-
... More
Supply & Delivery of following sizes single Core XLPE Insulated & Sheathed Non-Armored Aluminum conductor cable for Working Voltage up to 1100 Volts [Make - Havells/Gloster / Polycab / RR kable/KEI]
-
-
-
... More
single core 240 sqmm
360
-
-
... More
single core 95 sqmm
240
-
-
... More
Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting
600
-
-
... More
Dismantling the old 2 nos. Transformers, 3 Panel HT Gear, 2 nos LT Panel from existing Sub Station, LT Panel from Bot Tala S/S, one Feeder Piller in front of Microbiology Deptt., 3 nos. LT Panel from existing Deptt. after disconnection existing connection, deposited the same at University Store, mending good the damages as per direction.
1
-
-
... More
Hiring of 500 KVA DG set for emergency supply of Power to diff. Deptt. During the time of normal power shut down taken to give facility the work.
5
-
-
... More
Hiring of 250 KVA DG set for emergency supply of Power to diff. Deptt. During the time of normal power shut down taken to give facility the work.
5
-
-
... More
Hiring of 100 KVA DG set for emergency supply of Power to diff. Deptt. During the time of normal power shut down taken to give facility the work.
5
-
-
... More
Supply and pouring of Diesel Fuel for Hiring DG Set
7500
-
-
... More
Submitting of Electrical Plan layout diagram from different S/S to Diff. Building of Kalyani University in 4 copy.
1
-
-
... More
Supplying & delivery of HT 11 KV (E) Grade 3 core 240 sq. mm circular Armored Al. XLPE (E) insulated with extruded semi conducting compound in combination with copper tape, inner sheath of PVC tape armored & overall PVC sheathed cable (Make: Gloster / Universal / Polycabl / Havells) confirming to IS:7098 / part - II / 2011 with latest amendments. [ NS ]
48
-
-
... More
Laying of one 3 core 240 sq. mm cable through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand as per GS [F3 / 4(b] (At 300 KVA S/S site.)
48
-
-
... More
Supplying & fixing of 3 Core 240 sq. mm 11KV XLPE (E) cable termination heat shrinkable end kits 3M (M-seal) make including S&F heat shrinkable 11KV XLPE (E) cable termination end kits and other necessary materials complete for Indoor & Outdoor termination .also including socketing long barrel type 3 M (M-seal) / Dowels make by crimping method complete including S & F 11 KV HT tape & necessary materials also maintain proper method of 11 KV HT kit fixing. (NS )
4
-
-
... More
Supply & Delivery of following sizes 4 Core XLPE Insulated & Sheathed Armored Aluminum conductor cable for Working Voltage up to 1100 Volts [Make - Havells/Gloster / Polycab / RR kable/KEI]
-
-
-
... More
50 sq. mm (NS) [For Pump Room]
140
-
-
... More
95 sq. mm [NS] [For NMR Bldg.]
70
-
-
... More
120 sq. mm [NS] [For International Guest House]
900
-
-
... More
150 sq. mm (NS) [For Different Department]
1450
-
-
... More
240 sq. mm (NS) [For Research & Innovation Building and Adm. Building to S/S -4]
420
-
-
... More
300 sq. mm. (NS) [For LT Panel at SS and different Feeder Pillar]
2480
-
-
... More
400 sq. mm. (NS) [For Research Innovation Centre]
1020
-
-
... More
Withdrawing of Cable of 4 Core 35 sq. mm to 240 sq. mm from existing underground trench by companies own tools & tackles with care. (NS)
330
-
-
... More
Supplying & fixing medium gauge GI pipe (ISI medium, Make - Zindal / Bansol) protection with necessary fittings and jointing materials as required.
-
-
-
... More
50 mm dia [F6/11(c)]
10
-
-
... More
65 mm dia [F6/11(d)]
20
-
-
... More
80 mm dia [F6/11(f)]
60
-
-
... More
100 mm dia [F6/11(g)]
86
-
-
... More
125 mm dia [F6/11(h)]
300
-
-
... More
Road boring (Micro Tunneling) of different sizes of pipes / as per requirement / as per instruction of EIC with necessary tools & tackles complete including 80 mm dia GI pipe . (NS)
156
-
-
... More
Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting
-
-
-
... More
4 C 50 sqmm
20
-
-
... More
Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.
-
-
-
... More
4 C 95sqmm
15
-
-
... More
4 C 120 sqmm
16
-
-
... More
Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish
Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc.
-
-
-
... More
4 C 50 sqmm
20
-
-
... More
Laying of one cable upto 150 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand
-
-
-
... More
4 C 50 sqmm
5
-
-
... More
4C 95 sqmm
5
-
-
... More
4 C 120 sqmm
20
-
-
... More
4 C 150 sqmm
45
-
-
... More
Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand
-
-
-
... More
4 C 240 sqmm
10
-
-
... More
4 C 300 sqmm
230
-
-
... More
Laying of one cable above 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand
-
-
-
... More
4 C 400 sqmm
20
-
-
... More
Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed
-
-
-
... More
4 C 50 sqmm
85
-
-
... More
4 C 95 sqmm
50
-
-
... More
4 C 150 sqmm
283
-
-
... More
Laying of two cables above 35 sqmm and upto 185 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed
-
-
-
... More
4 C 120 sqmm
422
-
-
... More
4 C 150 sqmm
546
-
-
... More
Laying of one No. cable above 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed
-
-
-
... More
4C 240 sqmm
400
-
-
... More
Laying of two cables above 185 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed
-
-
-
... More
4C 300 sqmm
1274
-
-
... More
4C 400 sqmm
488
-
-
... More
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI
Pipe/open masonary trench for single, 2, 3, 3½ & 4 core
-
-
-
... More
4C 50 sqmm
10
-
-
... More
Laying only Cable above 50 sqmm but not exceeding 400sqmm
through existing RCC/ Hume/GI Pipe/open masonary trench for
single, 2, 3, 3½ and 4 core
-
-
-
... More
4C 120 sqmm
20
-
-
... More
4C 150 sqmm
30
-
-
... More
4C 240 sqmm
10
-
-
... More
4C 300 sqmm
62
-
-
... More
4C 400 sqmm
24
-
-
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE / PVC armored cables as below Dowels make gland as per GS
-
-
-
... More
4 Core 25 sq. mm [7(c)/F4 ]
10
-
-
... More
4 Core 35 sq. mm [7(c)/F4 ]
12
-
-
... More
4 Core 50 sq. mm [7(c)/F4]
12
-
-
... More
4 Core 70 sq. mm [7(c)/F4]
8
-
-
... More
4 Core 95 sq. mm [7(c)/F4]
4
-
-
... More
4 Core 120 sq. mm [7(c)/F4]
2
-
-
... More
4 Core 150 sq. mm [7(c)/F4]
10
-
-
... More
4 Core 185 sq. mm [7(c)/F4]
12
-
-
... More
4 Core 240 sq. mm [7(c)/F4]
2
-
-
... More
4 Core 300 sq. mm [7(c)/F4]
20
-
-
... More
Finishing of the XLPE / PVC insulated armored cable ends by crimping method incl. supplying & fixing solder less socket (DOWELS) make, tapes, anticorrosive paste & jointing materials as per GS.
-
-
-
... More
4 Core 25 sq. mm [8(b)/F5]
10
-
-
... More
4 Core 35 sq. mm [8(b)/F5 ]
12
-
-
... More
4 Core 50 sq. mm [8(b)/F5 ]
12
-
-
... More
4 Core 70 sq. mm [8(b)/F5 ]
8
-
-
... More
4 Core 95 sq. mm [8(b)/F5 ]
4
-
-
... More
4 Core 120 sq. mm [8(b)/F5 ]
2
-
-
... More
4 Core 150 sq. mm [8(b)/F5 ]
10
-
-
... More
4 Core 185 sq. mm [8(b)/F5 ]
12
-
-
... More
4 Core 240 sq. mm [8(b)/F5 ]
2
-
-
... More
4 Core 300 sq. mm [8(b)/F5 ]
20
-
-
... More
Sub-Head 7 --Earthing & Earth Bus bar Earthing with 50 mm dia GI pipe (Tata Medium), 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. [2(a)/G-1]
20
-
-
... More
Earthing with 65 mm dia GI pipe (TATA-Medium) x 3.0 Mts. long and 1 no. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. [2(d)/G-1]
10
-
-
... More
Earthing with 80 mm dia GI pipe (TATA-Medium)x 6.0 Mts. long full length and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 6.65 Mts. [For Transformer neutral − (4) nos, transformer body − (4) nos., consumer gear − 2 nos. and Lt Panel (4) ]
14
-
-
... More
Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
18
-
-
... More
Extra treatment of soil by using salt & charcoal for pipe electrode as to G.S. ( To be use / Pipe electrode (2 cement Bag Charcoal & 15 Kg Crystal Solt)
18
-
-
... More
Connecting the equipment’s to earth bus bar including S & F 4 SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipment’s with bolts, nuts, washers, cable lugs etc. as required and mending good damages. [5(a)(i)/G-2)]
40
-
-
... More
S & F of earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [4(a)/G-2]
6
-
-
... More
S & F of earth bus bar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [4(b)/G-2]
50
-
-
... More
Connecting the equipment body to earth bus bar including S&F 20 mm x 3 mm galvanized (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipment incl. drilling holes, with bolts, nuts, washers etc. [5(c)/G-3]
30
-
-
... More
Connecting the equipment body to earth busbar including S&F 25 mm x 6 mm galvanized (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipment incl. drilling holes, with bolts, nuts, washers etc. [5(d)/G-3]
20
-
-
... More
Supply & fixing earth bus bar of galvanized (Hot dip) MS flat 65 mm x 8 mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the bus bar complete with GI bolts, nuts, washers, spacing insulators etc. as required (for transformer neutral). [G-2/4d]
80
-
-
... More
Insulating the 65 x 8 mm GI flat incl. S&F black heat shrink PVC sleeves etc. The PVC tube sleeve to be inserted on the GI flat and heat shrieked by heating apparatus by skilled technician carefully without damaging the PVC sleeve as per direction of the EIC (for transformer neutral earth bus bar) (NS)
80
-
-
... More
S& laying 240 sq. mm. single core multi strand PVC insulated flexible Cu wire in suitable size of PVC flexible pipe (reinforced) from neutral earth bus bar to transformer point as required (to be laid 2 nos. in parallel) (for transformer neutral earthing including 2 nos. 240 sq.mm Size Cu. Socket Dowels make .) (NS)
20
-
-
... More
Supply & fixing of earth bus bar of Galv. (Hot dip) M.S. flat of 50 mm x 6 mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the bus bar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
50
-
-
... More
Connecting the equipment body to earth bus bar incl. S & F 50 mm x 6 mm galvanized (Hot dip) M.S. flat on Wall/floor with G.I. saddle as required and making connection to equipment with incl. drilling holes, nuts, bolts & washers as per G.S. [G-3/5.e]
50
-
-
... More
Making testing arrangement and submitting the test report for high voltage testing of specified voltage incl. checking & testing of all HT / LT equipment by authorized firm of Directorate of Electricity & commissioning the installation after obtaining the Approval of Directorate of Electricity. [NS]
1
-
-
... More
Providing & fixing danger plates made of mild steel at least 2 mm thick & vitreous enameled white on both sides & with inscription in signal red colour on front side as required.
(a) High Voltage - size 250mm x 200mm
3
-
-
... More
Providing & fixing danger plates made of mild steel at least 2 mm thick & vitreous enameled white on both sides & with inscription in signal red colour on front side as required
(b) Medium Voltage - size 200mm x 150mm
2
-
-
... More
S & F CO2 fire extinguisher (4.5 kg. capacity) (Surex / Fire shield / Max Well) on wall with necessary MS bracket as per G.S. incl. mending good the damages to original finish. [NS]
5
-
-
... More
Supply and fixing of foam fire extinguishers conforming to IS 4989-2006, Portable type 9 lit capacity hanged on wall with bracket complete as required. [Make - Fire Shield/ Ceasefire] [Non-Schedule Item]
5
-
-
... More
Providing of set of 1 no. 9.5 litre capacity GI bucket painted in post office red colour with prior coat of red-oxide paint and written with white paint 'FIRE' and mounted on MS angle iron frame with bracket and suitable base of appropriate size & capacity I/c filling sand etc.
6
-
-
... More
Supply and fixing shock treatment chart duly mounted on a wooden frame with 5mm thick glass as reqd. (approximate front area 1.20 sq.metre). [Non-Schedule Item]
5
-
-
... More
Supply and fixing safety instruction chart in word duly framed with 5mm thick glass as required (approx. Front area 1.20 sq.mt.)
5
-
-
... More
S & F best quality FIRST AID BOX (Al. body) as per PWD specification, complete with all the items as required by rule of sub-station on MS bracket incl. damages to original finish. [NS]
1
-
-
... More
S & D of 2 mtr' x 1 mtr x 12mm rubber mat to withstand 15KV dielectric strength as per IS 15652 - 2006 [NS]
3
-
-
... More
S & D of 2 mtr' x 1 mtr x 6mm rubber mat to withstand 3.3 KV dielectric strength as per IS 15652 - 2006 [NS]
2
-
-
... More
S & F 11/33 KV grade rubber hand gloves. [NS]
2
-
-
... More
Supply & fixing 6 mm thick best quality M.S. chequer Plate. Including painting. For covering the trench
1000
-
-
... More
Supply & fixing of ISM C channel 75 mm X 50 mm X 4.8 mm required for installation of HT and LT equipment over through out the cable trench in the sub station
250
-
-
... More
Supply & Delivery of Single Core 500 Sqmm sizes XLPE Insulated & Sheathed Armoured Aluminum conductor cable for Working Voltage up to 1100 Volts [Make - Gloster /RR kable/KEI / Polycab / Havells]
1680
-
-
... More
Laying of one cable above 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand
1080
-
-
... More
Laying of one No. cable above 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed
600
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%