Public Health Engineering Department Tender

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(Pakur Variety )

Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding of corners and including application of cement slurry before flooring works using cement @ 1.75 kg/sqm all complete including all materials and labour in ground floor 3 mm thick topping (High Polishing grinding on this item is not permitted )with ordinary cement. A) 35mm thick

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel SAIL/TATA/RINL

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams including fitting, fixing and striking out after and columns, lintels curved or straight completion of works (upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. i) Pakur Variety

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity ofwork) (a) With earth obtained from excavation of foundation.

125mm. Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Labour for hoisting plastics water storage tank (i) upto 1500 litre capacity.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected toone another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost ofrolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initial 8 m or part thereof. For structural members of specifid sections weighing less than 22.5 Kg/m

Supplying, fitting galvanised 2 ply 12 gauge / 2 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples , straining bolt and binding wire as necessary 2 ply 12 gauge/ 2 points . ( Payment to be made on the length of individual lines of wire.)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/ staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] with 1:6 cement mortar 20 mm thick

Neat cement punning about 1.5 mm thick in wall,dado,window sill,floor etc. Note : Cement 0.152 cu.m per 100 sq.m

M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in charge. In ground floor.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer's specification and as per direction of the EIC. In Ground floor: (a) One coat

Protective and decorative Acrylic exterior emulsion paint of approved quality as per manufacture's specification and as per direction of Engineer in charge to be applied over acrylic primer as required. The rate includes cost of material,labour,scaffolding and all incidental charges but excluding the cost of primer In Ground floor(Two coat) Normal Acrylic Emulsion

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Supplying PVC water storage tank of approved quality with closed top with lead. Black (Multi Layer) with hoisting 500 Liter Capacity

Supplying fitting and fixing in position approved PVC door frame mat finish made of extruded PVC multi chambers hollow section having dimension 60mmX50mmX2mm(+0.2mm) horizontal two number steel brackets as reinforcement making suitable space for placing hinges one steel tube 40mmX20mmX1.20mm will be inserted on one full vertical side of the frame (hinge side) as reinforcment the frame will then be fixed in the opening with the help of PVC expandable fastener wooden gatties and galvanised and steel screws including cost of all materials and labour hire charges of tools and appliances carriage of all materials taxes and all other incidental

Supplying fitting and fixing PVC door shutter of approval quality and shade in position the style and rail of the PVC door shutter will be made of rige PVC multi cavity hollow chamber of suitable size & section with 0.2mm wall thickness the section will have 2nos built in beads horizontal and vertical section shall be fixed to each other by self tapping screws and 2nos of solid plastic or MS tabular galvanized brackets of length 200mmX80mm and othr 100mmX100mmX both 120mm in each corner of the shutter frame for placing hinges polymer based multi cavity hollow section of 105mmX37mm with 2.0m wall mm thickness will be fitted in the middle as lock rail With alluminium cleat & steel screws as lock rail the section frame will then be fitted in by poluymer based panel of suitable size and 2nos. of 6mm dia bright rod will be insetred horizontally with both side check & nut system & streches where fixing of hinges/hasp bolt/tower bolt/door ring are required to be strong enough toi with stand and cost of all materials and labor hiring of tools and plants & appliances. Carriage of all materals and all other inidental charges complete.(Width of shutter ranging from ) a) 37 mm the shutter with 20mm th. Panel (wall thickness 1.2mm) & 90mm width style & rails with lock rail 105mm

Supply, fitting and fixing Orissa Pattern water closet in white glazed vitreoes chainware of approval make in position complete excluding P or 'S'trap (excluding cost of concrete for fixing) (i) 580mm x 440 mm

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cem,ent morter (1:4) including two 560mm dia RCC man hole cover of (nevy type)approved make supplied fitted fixed in the 100 mm thick RCC (1:1.5:3) top slab with necessary fitting 20mm thick cement plastr(4:1)with net cement finish to the internal surface and 15mm thick cement plaster 1:4 to outside wall upto 2000mm below GL floor finished with 20mm thick grey artificial ston 100mm thick RCC (1:1.5:3)bottom top inclkuding supply fitting and fixing all necessary specials fittings SW tees, CI food rests etc including excavation Earthin all store of soil, storing batting out and pumpinfg out of water as necessary, ramming dressing the bets and refilling the sides of the tank with earth, removing spolis filling up the chamber with clear water removing foreign metarials from the chamber and including the construction attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc with internal plaster work and artificial stone flooring is to be done with admixture and water proofing compound @ 0.50% by weight of cement with all cost of labour and materials for 10 users

Conmstruction of sock oil 2.5mm depth in all typs of sandy soil with dry brick work upto 1.6mtr form the bottom having 150mm intermediate cement brick work (4:1) all round and cement brick work 1:4 upto 0.90 mtr from top 0.9mm thick cement plastering (1:4) to inside phase upto the depth of cement brick work 15mm thick cement plaster 1:4 on outer face from top of the well upto GL and 50mm thick cement plaster 1.4 on the toip of the RCC cover slab including plinth bottom 1.00mm mtr inside of the well with 10mtr (15mm to 63mm size) including RCC (over slab of 100mm thick with cement concret 1:1.5:3 with stone chips with necessary raiinforcmenmt and shuttering including one 560mm dia RCC manhole cover (heavy type) of approved make supplied fitted and fixed in the cover slab with necessary fittingsmaking necessary arrangments for pipe onnections excavation of well including shoring dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labor and materials with 250mm thik dry brick work and 250mm thick cement brick work (6:1)and 1.00mm

Supplying fitting and fixing GI pipes of ISI mark with all necessary acceriories specials viz. Socket bend tee union cross elbob. Nipple, long screw recuding Tee, sot pice fitted with holder bats clamps including cutting pipes making threds fitting fixing etc.comeplete in the all respect including cost of all necessary fittings required joiniung materials two coat painiting with approved paint in any position above ground (payment .will be madeon the centr line measurement of total pipe line including all specials) no seperate payment wil be mabe for accesaries specials a) 15mm dia medium quality

b) 20mm dia medium quality

Supplyig fitting and fixing alloy iron with brass spindle bib cock/stop cock approved bend and spray painted under tested to 21kg per Sq cm. 15mm dia

Supplying fitting and fixing UPVC pipes A type and fitting confirming to 13592-1992 with necessary clamps nails including making holes in wal, floor etc. And cutting trenches in any soil, through masonary concret structure etc. If necessary and mending good damages including jointing matrils (span yark, valmoid bitumen/M Seal etc.)complete a) 110mm dia

b) 110 mm dia bend

c) 110 mm dia shoe

Supplying fitting fixing Foot rest for water closet of size 275 mm x 125 mm with (b) Porcelain of approved make.

Supplying fitting fixing towel rail with two brackets. (b)Aluminium (i) 25 mm dia 450 mm ling

Supplying fitting fixing cum-metal wheel-valve of approved brand & make tested 21KG/Sqm (for water line only) 20mm

Painting with best quality synthetic enamel paint of approved quality make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on surface if necessary: On steel or metal surface: with super gloss (hi gloss) Two coats (with any shade except white)

Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concerte by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris fron site complete as per direction of the Enginer-in-Charge.

Labour for Chipping of concrete surface before taking up plastering work.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this

Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge).

Add 18% GST (SGST-9% CGST-9%) (Payment to be made as per prevailing rules in vogue & as per actual executed )

Add 1% for labour welfare cess (Payment to be made as per prevailing rules in vogue & as per actual executed )