Public Health Engineering Department Tender

a) 200 mm. dia

Labour charges for jointing C.I. JEFFY (Flexible) coupling incuding hire charges if necessary tools & tackles all complete as per specification and direction all complete.

a) 200 mm. dia

Supplying HDPE (Materials grade PE-100) pipes conforming to IS 4984- 1995 with latest revision & amendments if any with necessary HDPE specials (excluding cost of CIDF valves) including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder,road sub-grade and aits flank but excluding moorum laterite or sand stone / hard rock cutting with chisel required including cutting road flank/ brick pavement etc. without damaging the exisiting telephone/electrical cable line etc.(in case of damage of any type of cable line by the agency at the time of execution necessary damage charge as applicable by the respective authority will have to be brone by the agency at his own cost)upto the depth (av.) so as to maintain 1.10m.earth cushion from top of the pipe upto G.L. including loading unloading carrying lowering laying fitting fixing carefully pipes, valves and specials with the all types of jointing materials in trenches maintaining proper levels and alignment jointing the pipes and specials by butt welding/ adopting suitable method (But weld jointing with help of hydraulic tack and trimming machines, Hitter etc. for reaching at necessary melting point of HDPE pipe so that joint can be monolithic) so as to facilitate the maintenance of pipe line locally as per conventional

(B) Pressure Rating : PN 6

(ii) Laying of pipe line including cost of pipe & fittings/specials but excluding cost of valves.

a) 180mm dia.

b) 90 mm dia.

Supply and delivery of CIDF sluice valve (Special type) PW-1.00 of different dia make with CI double flanged non rusting spindle sluice valves conforming to IS 14846 -2000 with latest emended having body dome/bonnet and cover of C.I.Gr-F.G 210mtr. spindle of IS-6603 G.R- 12/Gr-13 non-magnetic, nuts seat rings are of Gunonetal as per IS:318 LTB-2 flanges and drilled to IS:1538 Part IV & VI valves are suitable for max. working pressure of 10kg/cm2(seat test) and body tested to 15kg/cm2 .N.B: The above item should be procured from the reputed manufactures as per deptt. approved vender list

a) 200 mm dia.

a) 100 mm dia.

Submission of complete detailed drawing of distribution system, rising main etc. After execution of work showing position of different types of valves, fittings/specials sluice valve chamber with location, node to node wise in sanctioned drawing as completion drawing of the water supply scheme as per disrection and satisfaction of the EIC in 5 copies

Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified]

a) 200 mm dia.

b) 80mm to 150 mm dia.pipe.

Filling the pipe line with water, testing hydraulically as per I.S 3114-1965 (Article-6) in section of a length not exceeding 500mtr. for head of pressure as per specification including supplying installing and fixing all equipments such as diesel pump set, blank flange, pressure gauge, valve, pressure pump and all other tools and plants including drilling topping and plugging of necessary holes to pipes, blocking ends providing temporary thrust block and subsequent blocking of holes and other jointing materials and dismantling and removal of the same including disposal of water etc. all complete as per specification and direction of EIC. The rate is inclusive of cost of requisite water to be arranged by the contractor (Recovery rate of water @ Rs.10.00/m3 , if contractor used water from deptt. source).

For HDPE Pipe:

a) 180mm dia.

b) 90mm dia.

Cleaning thoroughly the inner surface of pipe line including specials and valves by flushing with water and subsequently disinfection of the same pipe line by flushing again with water containing bleaching powder resulting in residual chlorine not less than 15mg/ltrs. after 24hrs. of such filling including laboratory testing of water samples obtain from the disinfested pipe line and disposal of water from the pipe line after completion of the work. The rates including of cost of requisite water to be arranged by the contractor) (The rate of water @Rs. 10/m3 may be recovered, if the contractor used water from deptt. source).

For HDPE pipe:

a) 180mm dia.

b) 90mm dia.

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 for Rural Roads of MORD

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Hire and labour charges for shuttering with cantering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)

(a) 25 mm. to 30 mm. shuttering without staging in foundation.

Hire and labour charges for corssing of the pipe line horizontally across the PWD/NH roads with hand boring set by water jet system including punping of water in the bore. The cost inclusive the earth work in excavation as necessary driving pit and receiving the pit across the road layer and passing the G.I. pipe 1.20 Mtr. below road level specified otherwise barricading with red light signaling arrangement to avoid any accident including back filling the trenches after successfully complete of the works as per direction of the EIC. The cost also includes all necessary hire charges of pumping machineries boring set other tools and plants and the laying pipe within the bore. (upto 150mm. dia.)

a) 200 mm dia.

b) 100 mm dia.

Supplying , fiting and fixing G.I pipes of TATA make with all necessary accessories, specials viz socket,bend tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. Fitted with holder bats clamos, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fityting as required, jointing materials and two coats of painting with approved paint in any position above ground . (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

(A) For Exposed work

a) 100 mm dia. medium quality

Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately)

a) 100 mm dia. medium quality

Ordinary cement concrete (Mix- 1:2:4) with graded stone chips (20 mm. normal size) excluding shuttering and reinforcement, if any, in ground floor, as per relevent IS Code.

a) With pakur variety

Add GST @18% (CGST@9%+SGST@9%)

Add Cess @1%