Public Health Engineering Department Tender

13 mm dia 3 mm thick polythene pipe with 1x16 SWG GI earth continuity wire

Distn. wiring in 22/0.3 (1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19mm bore, 3mm thick polythen pipe complete with all accessories embedded in wall to240V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key types witch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG)switch board with bakelite/perspex(wall matching colour) top cover (3mm thick) flushed in wall incl. mending good damages to original finish. (a) 2x22/0.3 (Ph. & N) and 16 SWG GI as ECC PWD Electrical schedule page no- E-10 sl no 4 (b)

on board

average run 1.5 mtr.

average run 3 mtr.

average run 4.5 mtr.

Finishing of 1.5/2.5 sqmm PVC insulated cu wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. PWD Electrical schedule page no- F-5 sl no 9

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite / Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brickwall incl.making earthing attachment, painting and mending good damages to building works PWD Electrical schedule page no- E-17 sl no 1

4 Module

6 Module

12 Module

2 Row 18 Module

S&D of 240V 48" sweed BEE 5 star rating (minimum) AC ceiling fan (make Crompton Greaves-Enregion Groove Remote Anti Dust, Satin sand or equivalent model) as directed by EIC.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. PWD Electrical schedule page no- C-3 sl no 21(a)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. PWD Electrical schedule page no- E-6 sl no 18(a)

Supply & Fixing 240 V 6A Modular type switch (Brand approved by EIC ) on existing GI Modular type switch board having top cover plate and making necessary connections as required . PWD Electrical schedule page no- E-17 sl no 3(a)

Supply & Fixing 240V, 6A, 5 pin Modular type plug socket ( Brand approved by EIC ), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connection swith PVC Cu wire and earth continuity wire etc. PWD Electrical schedule page no- E-17 sl no 4(a)

Supply & Fixing 240 V 16A Piano key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required. PWD Electrical schedule page no- E-17 sl no 3(b)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on GI/PVC Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. PWD Electrical schedule page no- E-17 sl no 4(b)

Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. PWD Electrical schedule page no- E-19 sl no 18

Supply & delivery wall mounting fan making necy. Connection with PVC cu wire and earth continuity wire etc. Make- cromton/other approved make. (Model - WM Hi Flo Neo)

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. PWD Electrical schedule page no-C-4 sl no 29

Supply & fixing exhaust fan making necy. Connection with PVC cu wire and earth continuity wire etc. Make- cromton/other approved make. (Model - Ventilus 8")

Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections as required. PWD Electrical schedule page no E-18 sl no 8(a)

Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) incl. S&F 20mm dia PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. PWD Electrical schedule page no-E-19 sl no 21

Supply and delivery single LED fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.(Make-Philips Cat No- BN308C LED 20S-6500 L60 PSU WH or equivalent

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc. PWD Electrical schedule page no-C-2 sl no 13

Supply & Fixing decorative down light fitto- DN296 B LED 15 S- 6500 PSE WH S2, 15 W or equivalent) and 24/0.2 mm (1.5 sqmm) flexible copper wire all complete at recessed false celling.

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor. PWD Building schedule Vol. i Pg 162 of 315

Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U-1520).

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] PWD Building schedule Vol. i Pg 173 of 315 In Ground Floor (i) 19 mm

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in?charge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floorGlossy/Matt/Suede excluding surface texture or metallic lustre. thickness of laminate 1 mm. PWD Building schedule Vol. i Pg 179 of 315

Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge 150 mm PWD Building schedule Vol. i Pg 243 of 315

Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete. 150mm plate x 10mm dia rod x 12mm hexagonal/fluted. PWD Building schedule Vol. i Pg 146 of 315

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 75mm. X 47mm. X 1.70 mm. PWD Building schedule Vol. i Pg 140 of 315

Supplying & Fixing 240 V AC/DC superior type Multitune ( min 10 nos. tune) Call Bell (Anchor) with selector switch for single/Multi Tunes mode, Battery operated on HW board incl. S&F HW board. PWD Electrical schedule pg no D-3 sl no 20©

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 PWD Building schedule Vol. i Pg 249 of 315 i) 8 mm thick clear glass.

French polishing to wood work including preparing surface (high gloss polish) PWD Building schedule Vol. i Pg 202 of 315 a) on new wood work.

Door stopper.(Brass). PWD Building schedule Vol. i Pg 143 of 315

Godrej Hydraulic door closer fitted and fixed complete. Heavy type. PWD Building schedule Vol. i Pg 143 of 315

Anodised aluminium skeleton bolt of approved quality manufacturing from extruded section conforming to I.S. specification (I.S. 204/74) fitted and fixed with cadmium plated screws: PWD Building schedule Vol. i Pg 144 of 315 450mm long X 12mm dia bolt.

Supply, delivery & fitting-fixing of 18 W, 4 ft long LED Batten as directed by EIC.

Supplying, stiching, fitting & fixing designers exclusive curtain cloth made up of velvet/satin of renewed makeand shades including white satin cloth for lining and hanging beadswith necessary rings including cutting, sewing, hanging complete as per direction of the E.I.C

(i) 66" X 54"

(ii) 63" X 54"

Chain light for falls ceiling. Make- Philips Model - Pro Glow Nxt

Plantex full extension ball bearing telescopic channel runner / Drawer slides mount rails (silver)

(i) 18 inches.

Supply delivery and installation of automatic voltage stabilizer for Air Conditioning machine.

ADD GST @ 18%

ADD Cess @ 1%