Public Health Engineering Department Tender

Labour charges for repairing of UPVC Pipe by using UPVC socket and solvent cement including earth work in excavation with clewatering and necessary tracing out the actual position of brusting / leakage, cutting the pipe to required length in the trenches and replacing the same with new pipe (as per required length) including fitting, fixing after roughing the UPVC surface & supplying and applying solvent cement, back filling the trenches with excavated earth upto the same as per direction of EIC all complete (UPVC pipes and specials, solvent cement to be supplied by the Agency). Unserviceable broken withdrawan surplus materials are to be deposited to the Deptt. Store.

a) 75 mm dia

b) 90 mm dia

c) 110 mm dia

d) 125 mm dia

e) 140 mm dia

f) 160 mm dia

g) 180 mm dia

h) 200 mm dia

Extra repairing charges for changing of gland packing of sluice valve/ air valve with supplying of gland packing grease etc bailing out of water including removing the top cover slab of valve chamber and refixing the same after completion of work as per direction of E.I.C. a) 80 mm dia to 125 mm dia

b) 150 mm dia. To 250 mm dia

c) 300 mm dia. To 350 mm dia

Repairing of air valves by changing the ball with changing the requisite nuts and bolts and rubber insertion all complete as per direction of EIC.

Making barricading for protecting the trench to avoid any accident including making arrangement of road light during the night.

Repairing of flange joint after dismantling the joints, removing the unserviceable rubber insertion and supply new rubber insertion and supply upto 50 % of new nuts and bolts all complete including necessary earth work dewatering & supply of washer etc. all complete as per direction of EIC

a) 80 mm dia. to 100 mm dia. 311.00 Each

b) 125 mm dia. to 200 mm dia. 545.00 Each

c) 250 mm dia to 350 mm dia. 744.00 Each

Opening the cap / plug of washout point and opening sluice valve to clean the pipe, cleaning the cap / plug and sluice valve after completion of the work including earth work in excavation and refilling the same, draining out washed water etc. as per direction of ElC and replacing RCC Top slab cover where necessary including refixing the opened cap/plug in position complete. a) Cap Opening.

Dewatering from the excavated trenches for repairing any type of pipe line including Hire Charge of pump / carriage / Fuel & lubricant / Operator etc. for big dia pipes more, than 200 mrn dia all complete as per direction of EIC. (This item will be executed after the permission of E.l.C.)

Cleaning the chokage of AC/DI/CI / UPVC Pipes in the existing line by split bamboo passing through the new pit on the line and cleaning silt, bats or any obstructed materials in the line and cleaning by washed water. (Work to be executed as per prior approval and direction of EIC).

Withdrawing and relaying of DI/CI pipes / AC pipe after excavation of earth and with the help of chain pully derrick etc. by dismantling & jointing by rubber gasket joint or lead joint or flange joint and stacking the withdrawn pipes and specials at site store /road flank, godown etc. all complete in the excavated same trench & as per direction of EIC.

a) 80 mm dia to 125 mm dia

b) 150 mm dia to 200 mm dia

Cleaning silt (every month) from the over head reservoir, cleaning washing and disinfecting the same with bleaching powder, including machinery, tools and plants as per direction of EIC complete (Bleaching powder will be supplied by the agency).

a) Upto 1.50 lakh gallon capacity OHR.

Supplying Bleaching Powder of approved brand (DCM/Modi/Kanoria) including all charges and free delivery at site.

Supplying of UPVC Coupler 6Kg., class – III conforming to IS : 4985 – 2000 with latest revision and amendments ( This item is applicable for maintenance/ repairing work of pipe line only).

a) 63 mm dia ( OD )

b) 75 mm dia ( OD )

c) 90 mm dia ( OD )

d) 110 mm dia ( OD )

e) 140 mm dia ( OD )

f) 160 mm dia ( OD )

Supplying, laying, fiting, fixing and jointing of UPVC pipes conforming to IS:4985-2000 with latest revision and amendments, if any, with necessary UPVC/CI specials, CIDF sluice valves, as per relevant I.S. specification including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder ,road sub-grade and its flanks but excluding moorum and laterite or sand stonehard arock including cutting of brick payment without damaging the existing telephone/electrical cable line etc.(in case of damage of any type of cable line during excavation, necessary damaged charges as applicable by the respaective authority will be borne by the agency in his own cost. Loading, unloading, carrying of pipes, specials, valves from the local store to work site and lowering laying of pipes specials valves carefully in trenches maintaining proper levels and alignment ,jointing the pipe and specials including supplying of good quality/approved brand solvent cement (as per IS:14182-1994 including cost of all fabricated PVC fitting i.e. tees,bend, reducers, adopter etc.as per IS:101-1988 and making flange joints including supplying required quantity of nuts, bolts and rubber insertion (CIDF sluice valves will be supplied by the department free of cost) as required at site by adopting suitable method so as to facilate the maintenance of pipe line locally as per conventional method including back filling the trenches with good earth obtained from excavation of trenches including consolidation with watering in layer not exceeding 150mm thk. with maintaining an average depth of cushion of 1.10mtr. from the top of pipe line including making interconnection with distribution pipes etc. all complete as per drawing direction and satisfaction of the E.I.C. N.B. i) Manufacturer’s test certificate for UPVC pipe & specials to be produced before laying of pipe line. (A) Pressure Rating : Class - III (i) Laying of pipe line including cost of pipe only excluding cost of specials/fittings & valves.

b) 75 mm dia

c) 90 mm dia

d) 110 mm dia

e) 125 mm Dia

f) 140 mm dia

g) 160 mm dia

h) 200 mm dia

Filling the pipe line with water, testing hydraulically as per I.S 3114-1965 (Article-6) in section of a length not exceeding 500mtr. for head of pressure as per specification including supplying installing and fixing all equipments such as diesel pump set, blank flange, pressure gauge, valve, pressure pump and all other tools and plants including drilling topping and plugging of necessary holes to pipes, blocking ends providing temporary thrust block and subsequent blocking of holes and other jointing materials and dismantling and removal of the same including disposal of water etc. all complete as per specification and direction of EIC. The rate is inclusive of cost of requisite water to be arranged by the contractor (Recovery rate of water @ Rs.10.00/m3, if contractor used water from deptt. source).

b) 75 mm dia

c) 90 mm dia

d) 110 mm dia

e) 125 mm Dia

f) 140 mm dia

g) 160 mm dia

h) 200 mm dia

Cleaning thoroughly the inner surface of pipe line including specials and valves by flushing with water and subsequently disinfection of the same pipe line by flushing again with water containing bleaching powder resulting in residual chlorine not less than 15mg/ltrs. after 24hrs. of such filling including laboratory testing of water samples obtain from the disinfested pipe line and disposal of water from the pipe line after completion of the work. The rates including of cost of requisite water to be arranged by the contractor) (The rate of water @Rs. 10/m3 may be recovered, if the contractor used water from deptt. source).

b) 75 mm dia

c) 90 mm dia

d) 110 mm dia

e) 125 mm Dia

f) 140 mm dia

g) 160 mm dia

h) 200 mm dia

For Existing FHTC with ferrule connection, Refixing of existing ferrule with fittings in the proposed distribution pipeline and supply, fitting & fixing of all other accessories like saddle piece of required size to fit the proposed pipeline, specials, nut & bolts, rubber sheet, washers etc, including cutting trenches in all sorts of soll and filling up trenches as per direction of the Engineer-in charge.

Dismantling all type of plain cement concrete works, stacking serviceable materials of site and removing rubbish as directed within a lead of 75mtr. for laying all dia pipe line in ground floor, upto 150mm thick

Providing and fixing 3 layer OO-R (Poly Propylene Random Copopolymer) pipes conforming to IS : 15801 UV stabilized & anti- microbial fusion welded , having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittigs , including trenching, refilling & testing of joints complete as per direction of E-I-C. (A) External work( CLASS SD R.4/PN-16) 20 MM DIA (OD)

Clearing compound premises of shrubs, plants, jungles etc. by cutting & removing as directed (specific permission of engineer incharge prior to execution will necessary). (Payment to be made on area cleared).

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. i) Pakur Variety

Labour for dismantling G.I. pipe with fittings. (i) 15 mm

Refixing G.I. pipe with fittings after cleaning where necessary. (i) 15 mm

Dismantling and refixing bib cock or stop cock. (i) 15 mm

Rewashering stop cock/ bib cock/ push cock/ pillar cock including gland

Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately) (i) 15 mm dia. medium quality

Providing and fixing service saddle suitable for portable uses including supply of all materials and labours etc.

63 mm X 20mm/25 mm

75 mm X 20mm/25 mm

90 mm X 20mm/25 mm

GST @18% on all the above items.

Labour Welfare Cess @1% on all the above items.