Public Health Engineering Department Tender

Make of all equipment will be as per the Ministry of New and Renewable Energy (MNRE) guidelines and approved list of Module and manufacturers ALMM (Approved List of Module and Manufactures) and unified vendor list published in the Departmental website..

"Providing and installation of Solar Photo voltaic panels (Mono/Poly crystaline as per MNRE specification and guideline for 10 KWp pumping system having necessary PV array (Photo Voltiac) mounted on independent steel structure of suitable height and in suitable direction to optimize panel use and to withstand to wind pressure upto 200 km / hr along with necessary 3 phase invertor, cable switch or circuit breaker , connector , junction box, Earthing, Lightening arrester, transportation , installation on ground and commissioning with 5 year CMC (Comprehensive Maintenance Contract) (The PV Modules must be warranted for output wattage, which should not be less than 90% of the rated wattage at the end of 10 years and 80% of the rated wattage at the end of 25 years) a) PV module should be mounted on hot dip galvanized metalic structure of adequate strength and as per specification. b) Components & parts used in the solar system including the metallic structure (MS) should conform to latest BIS and MNRE guideline c) Cost is inclusive of Module Mounting Structure , Transportation, Insurance, warranty / guarantee, monitoring and maintenance for 5 years all complete and as per specification and MNRE guideline. 1.Uttar Majidkhana 2.PARARPAR 3.Dakshin Majidkhana 4.Dalgaon TG 5. Khagenhat "

"Additional Structural work required for installation of MMS (Module Mounting System) on ground instead of Rooftop complying to the above main structure depending upon existing site condition and direction. Each site considered @ 0.5 MT (Measurement will be taken as per actual ) 1.Uttar Majidkhana 2.PARARPAR 3.Dakshin Majidkhana 4.Dalgaon TG 5. Khagenhat "