Public Health Engineering Department Tender

b) 150 mm dia. To 250 mm dia

Repairing of flange joint after dismantling the joints, removing the unserviceable rubber insertion and supply new rubber insertion and supply upto 50 % of new nuts and bolts all complete including necessary each work dewatering & supply of washer etc. all complete as per direction EIC

a) 80 mm dia. to 100 mm dia.

b) 125 mm dia. to 200 mm dia.

e) 250 mm dia to 350 mm dia.

Supplying, Laying, Fitting, Fixing and Jointing of UPVC Pipes (6.0 kg/sqm. Water Pressure) class - III conforming to IS: 4985-2000 with latest revision and amendments, if any, with necessary UPVC/CI specials, CIDF sluice valves, as per relevant I.S. Specification including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder, road sub-grade and its flanks but excluding moorum and laterite or sand stonehard arock including cutting of brick payment without damaging the existing telephone / electrical cable line etc, (in case of damage of any type of cable line during excavation, necessary damaged charges as applicable by the respective authority will be borne by the agency in his own cost. Loading, Unloading, Carrying of pipes, specials, valves from the local store to work site and lowering laying of pipes specials valves carefully in trenches maintaining proper levels and alignment, jointing the pipe and specials including supplying of good quality / approved brand solvent cement as per IS: 14182-1994 including cost of all fabricated PVC fitting i.e. tees, bend, reducers, adopter etc. as per IS: 101-1988 and making flange joints including supplying required quantity of nuts, bolts and rubber insertion (CIDF sluice valves will be supplied by the department free of cost) as required at site by adopting suitable method so as to facilate the maintenance of pipe line locally as per conventional method including back filling the trenches with good earth obtained from excavation of trenches including consolidation with watering in layer not exceeding 150 mm thick with maintaning an average depth of cushion of 1.10 mtr. ii)Laying of pipeline including cost of pipe & fittings/specials but excluding cost of valves. N.B. i) Manufacturer's test certificate for UPVC pipe & specials to be produced before laying of pipe line. ii) 3rd party inspection of UPVC pipe & specials to be done by CEPET or (INDIA) SGS / NTH Kolkata or as per direction of EIC as per approved vendor list. iii) No part payment at any stage on account of supply of materials shall be entertained. iv) Payment will be made on actual consumption of materials. v) UPVC Pipes for the works to be supplied as per approved vendor listn and as per direction & satisfaction of EIC. No pipes will be allowed beyond recommended vendor list. vi) Submission of drawing of pipe line with statement of materials consumed between node to node points against each RA & Final Bill. If so. vii) Any deviation from required clear cover of 1.10 mtr. due to site adverse condition, prior permission is to be obtained from EIC and payment for such work will be made on prorate basis over the rate of entire item. viii) All pipe connection shall be completed in all respect and as per direction of EIC. Decision of EIC in this respect is final & binding in case of any deviation / or any left out pipe connections an amount of Rs. 10,000.00 for each pipe connection will be realised / recovered from the Bill. B) Laying UPVC (Class - III) pipe line including cost of pipe& fittings / specials but excluding cost of valves.

b) 63 mm dia

b) 75 mm dia

c) 90 mm dia

d) 110 mm dia

e) 125 mm dia

f) 140 mm dia

g) 160 mm dia

h) 200 mm dia

i) 225 mm dia

j) 250 mm dia

Labour charges for repairing of UPVC Pipe by using UPVC socket and solvent cement including earth work in excavation with clewatering and necessary tracing out the actual position of brusting / leakage, cutting the pipe to required length in the trenches and replacing the same with new pipe (as per required length) including fitting, fixing after roughing the UPVC surface & supplying and applying solvent cement, back filling the trenches with excavated earth upto the same as per direction of EIC all complete (UPVC pipes and specials, solvent cement to be supplied by the Agency). Unserviceable broken withdrawan surplus materials are to be deposited to the Deptt. Store.

b) 75 mm dia

c) 90 mm dia

d) 110 mm dia

e) 125 mm dia

f) 140 mm dia

g) 160 mm dia

h) 200 mm dia

Clearing compound premises of shrubs, plants, jungles etc. by cutting & removing as directed (specific permission of engineer incharge prior to execution will necessary). (Payment to be made on area cleared).

Making barricading of excavation trenches of road width upto 15mtr. to avoid any accident by providing 75mm dia bamboo post placed vertically & horizontally with the help of 6”size iron rail as per direction and satisfaction of EIC. (Applicable where critical situation arise and take up the work as per direction of EIC)

Cleaning silt (every month) from the over head reservoir, cleaning washing and disinfection the same with bleaching powder, including machinery, tools and plants as per direction of EIC complete (Bleaching powder will be supplied by the agency. a) above 1.50 lakh gallon and upto 2.50 lakh gallon capacity OHR

Opening the cap / plug of washout point and opening sluice valve to clean the pipe, cleaning the cap / plug and sluice valve after completion of the work including earth work in excavation and refilling the same, draining out washed water etc. as per direction of EIC and replacing RCC Top slab cover where necessary including refixing the opened rap/plug in position complete. a) Cap Opening

Cleaning the chokage of DI/UPVC Pipes in the existing line by split bamboo passing through the new pit on the line and cleaning silt, bats or any obstructed materials in the line and cleaning by washed water. (Work to be executed as per prior approval and direction of EIC.)

Dismantling existing ferule with fitting and refixing the same after cleaning and washing of pipe line upto stand post.

Taking out of old and damaged valve of any type from the existing line after dismantling of Flange Joint or Socket Joint and fitting, fixing of New Valve. ( Cost of dismantling of joint and renewing the same to be added with this item to complete the job in all respect )

i) 80 mm to 100 mm dia

ii) 125 mm to 150 mm dia

iii) 200 mm to 250 mm dia

Providing and fixing 3 layer OO-R (Poly Propylene Random Copopolymer) pipes conforming to IS : 15801 UV stabilized & anti- microbial fusion welded , having thermal stability for hot & cold water supply, including all PP-R plain & btass threaded polypropylene random fittigs , including trenching, refilling & testing of joints complete as per direction of E-I-C. (A) External work( CLASS SD R.4/PN-16) 20 MM DIA (OD)

Proving and fixing service saddle suitable for portable uses including supply of all materials and labours etc.

63 mm X 20mm/25 mm

75 mm X 20mm/25 mm

90 mm X 20mm/25 mm

Supplying of UPVC Coupler 6Kg., class - III conforming to IS : 4985 - 2000 with latest revision and amendments ( This item is applicable for maintenance/ repairing work of pipe line only).

c) 90 mm dia ( OD )

d) 110 mm dia ( OD )

e) 140 mm dia ( OD )

f) 160 mm dia ( OD )

Provision for making payment towards labour wages in case of enhancement within the stipulated period of the said work to be in the following manner{[ enhancement of wages + 8.33% bonous + 10% contractors profit +5% overhead expenses + ESI+EPF.}

GST @18% on all the above items.

Labour Welfare Cess @1% on all the above items.