Public Health Engineering Department Tender

Supply and fitting fixing of 40A DP Isolator (Make: Havells/Standard/ approved make)

Supply and delivery of CFL, 65 watt, (Make-phillips/ other approved make)

Supply of LED light fittings complete with all accessories including 50 W bulb incl. fixing light fitting on wall by means L clamp, nipple, suitable size fastner and connection by 1.5 sqmm PVC/Cu wire as to GS. ( Make- Philips/Havells/Bajaj/ other approved make)

M.S. structural works with hollow sections (TATA make square or rectangular shape) conforming to IS: 806-1957 & IS:1161- 1958) connected to one another with bracket, gusset, cleat as per design. drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1956 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. i) For roof truss works a) Span up to 12 Mtr pwd(sor vol - 1 ( 01.11.2017) Page - 105 item No - 16 / Corrigenda - 03

Extra for Staging beyond 4 measurement Area of unsupported horizontal projection m (mode of (where staging beyond 4 m is practically unavoidable) x mean height of staging] above initial 4 m (pg. no. 65, it.No. 13 B)

Erections and febrication of M.S. tube of 75mm dia piller after making suitable size jumping pillars by welding base plate and with M.S. round with proper scafolding and jumping in CC as per direction of EIC A) 4 Mtr height M.S. pipe 75mm dia

Jumping with welded tubeless truss through out welding and proper scafolding

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted 6 and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet

Carriage of old and damaged metarials and stacking at suitable place by hire of trucktor with labour gang