Public Health Engineering Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Public Health Engineering Department - PHED Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date6 Feb 2025
Closing Date28 Feb 2025
Tender Amount₹ 13,94,816
Costs
EMD
₹ 27,900Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of 02 (two) Nos. Chlorine Room (size 5.90 M X 4.10 M Out To Out) With Sanitary And Water Supply Arrangement At Head Work Site At Ghateswar In Zone-x And Achina In Zone-vii For Augmentation Of Laying Distribution System To Extend
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PHED_811492_15Tender No
44/2024-2025/EE/SWD-I/WBPHEDTender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://https://www.wbphed.gov.in/en/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Single Brick flat soling of picked jhama bricks including ramming and dressing bed to proper level, and filling joints with powered earth or local sand.
94.82
361
34230.02
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips....... floor as per relevant IS codes.
a) Pakur Variety a) 1:2:4 proportion in ground floor & foundation. (Carriage distance 16 Km from Ballygunge stack yard)
8.94
5658
50585.2
... More
Ordinary cement concrete (3:1.5:1) with graded stone chips (20 mm size) nominal size excluding shuttering and reinforcement , if any in ground floor as per relevant IS Code. (a)Pakur variety (Carriage distance 16 Km from Ballygunge stack yard)
14.48
6147
89021.74
... More
Brick work with 1st class brick in Cement Morter. (1:6)
-
-
-
... More
a) In foundation and plinth .
19.54
5367
104884.86
... More
b)in superstructure ground floor(1:6)
23.72
5590
132611.4
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in
ground floor
23.76
728
17308.45
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 mtr using approved about props and thick hard wood planks of approved thickness with required bracing for concrete slabs , beams,columns,lintels,curved or straight including fitting, fixing & striking out after completion of works(upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-charge.
94.76
335
31744.6
... More
b) 25 mm to 30 mm shuttering without staging in foundation
37
209
7733
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. , initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. a)For works in foundation basement upto roof of ground floor/upto 4 m . i)Tor steel / Mild Steel ( SAIL/TATA/RINL)(Ex-Outlet 10KM from site)
2.4
96297
231114.72
... More
25 mm thick Damp proof course with cement concrete with stone chips (3:1.5:1))(with graded stone aggregates 10 mm normal size)and painting the top surface with a coat of bitumen using 1.7 kg per sq m including heating the bitumen and cost and carriage of all materials complete.
9.8
257
2519.68
... More
FLOORING
Artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rouding off corners and including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m. all complete including all materials and labour. In ground floor 3 mm thick topping (high )polishing,grinding on this item is not permitted with ordinary cement).
-
-
-
... More
i) 25 mm thick.
39.48
265
10500.1
... More
Neat cement punning about 1.5mm thick in wall, dado, window, ceiling, floor, drain etc.
46.42
32
1520.26
... More
Plaster (to wall, floor, ceiling etc)with sand & cement mortar includg rounding off or chamfering corners as directed a ramming out joints or roughening of concrete surface by chamfering etc. including threading noising and drip course where necessary.(Ground Floor)
-
-
-
... More
i) With 1:6 cement mortar
-
-
-
... More
a) 20 mm thick to inside wall
210.62
171
36165.56
... More
b) 15 mm thick plaster
197.34
148
29310.91
... More
c) 10 mm thick cement plaster(1:4)
61.98
130
8090.25
... More
Labour for Chipping of concrete surface before taking up
Plastering work.
94.9
21
1992.9
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.Supplying fitting, fixing- Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed typeventilators. [The extra rate admissible for the openable portion only]
12.96
2199
28499.04
... More
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials
10.2
1304
13300.8
... More
Supplying,fitting and fixing Fan Hook for ceiling with 1 metre long 16mm dia rod complete including mending damages .Payment for damage and repair to be made separately.
4
100
400
... More
Renewing throating,nosing or drip course moulding with 15 mm thick cement plaster(1:4)complete.(cement 0.7 kg/mtr.) In ground floor.
12
19
228
... More
Band moulding (horizontal-verticle) rectangular section made with cement plaster 1:4 complete. i) Projection upto 25 mm
a)Depth or Width 75 mm to 100mm.
44
38
1672
... More
Supplying fitting approved type ventilator in position after cutting holes in walls,setting in cement mortar,mending damages to wall and plaster and two coats of paint of approved brand sand shade .Payment of mending two damages of wall & plaster and painting to be made separately.
-
-
-
... More
R.C.C. ventilator of 20 mm thick - upto 0.10 sq.m. area
12
108
1296
... More
DOOR & WINDOW
Woodwork in door and window frame fitted and fixed complete including a protective coat of painting at the contract surface of the frame. d) Sal : Local
0.28
77671
21747.88
... More
Panel shutter for door and window as per design (Each panel consisting of single plank without joint)including fitting & fixing the same in position but excluding the cost of hinge and other fitting in Ground Floor(In case of non supply of single plank,penal rate of reduction of 20% will be made) 40 mm thick shutters with 19 mm thick pane of size 30 to 45 cm. sishu/Gamar/Champ/Badam/Bhola/Mogra/Hallak
3.6
3143
11314.8
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length
28
29
812
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
-
-
-
... More
a) 75 mm x 60 mm x 3.15 mm
12
47
564
... More
b) 100 mm x 75 mm x 3.50 mm
8
66
528
... More
Iron Hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm. dia rod with centre bolt and round fitting. - 300 mm. long.
4
166
664
... More
M.S. or W.I. ornamental grill of approved design,joints continuously welded with M.S. WI flats and bats for winding,drilling etc.fitted & fixed with necessary screw and lugs in ground floor. a)Grill weighing above 10 Kg/Sqm upto 16 Kg/Sqm (in Kg)
3.32
9888
32828.16
... More
Iron door ring of approved quality fitted and fixed with nut and washer complete. A) 50 mm dia.
4
17
68
... More
Iron socket bolt of approved quality fitted and fixed complete.
-
-
-
... More
A) 150 mm long x 10 mm dia bolt.
4
63
252
... More
B) 300 mm long x 10 mm dia bolt.
4
95
380
... More
Iron catch hook of approved quality fitted and fixed to shutter and chowkat, (a)6 mm dia x 225 mm long
12
64
768
... More
Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge.
10.2
385
3927
... More
Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in- Charge.
3.2
2438
7801.6
... More
PAINT
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (Plastered or concrete surface) as per manufacture's specification in ground floor. A) Two Coats (on new cement plaster surface)
189.52
49
9286.48
... More
White washing including cleaning and smoothening surface thoroughly. A) 3 Coats.
272.6
20
5454.73
... More
Priming one coat of timber, plastered surface with synthetic enamel/oil bound primer of approved quality including smoothening surface by sand papering etc.
10.92
38
414.96
... More
a) on steel or other metal surface
62.12
29
1801.48
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of a approved putty etc on the surface if necessary
-
-
-
... More
a) On timber or plastered surface (with other than hi gloss of approved quality). i) 2 Coats (with any shade except white)
10.92
75
819
... More
b) On steel or other metal surface (with other than hi gloss of approved quality). i) 2 coats (with any shade except white)
62.12
72
4472.64
... More
SANITARY & PLUMBING
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
75 mm. Dia.
16
188
3008
... More
Supplying,fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings . (tested to 21 kg/sq.cm.) (for water lines only).- 15 mm. dia.
4
521
2084
... More
Construction of Septic Tank of different capacities as per approved drawing with 1st class brick work in cemnt mortar (4:1) including 560 mm dia RCC manhole cover (Heavy type) of approved make supplied , fitted and fixed in the 100 mm thick RCC (3:1.5:1) top slab with necessary fittings, 20 mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4:1) to outside wall upto 200 mm below GL floor finished with 25 mm thick grey artificial stone over 100 mm thick RCC (3:1.5:1) bottom slab including supplying , fitting and fixing all necessary specials fittings ,SW tees CI foot rest etc including excavating earth in all sorts of soil , shoring , bailing out and pumping out water as necessary ,ramming dressing the bed and refilling the sides of the tank with earth ,removing spoils , filling up the chamber with clear water , removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes ,joints etc with internal plaster work and artifical stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement , complete in all respect as per direction of Engineer In Charge. Using Tor steel / Mild Steel ( JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL)
-
-
-
... More
i)for 10 users with 250 mm thick brick work (6:1) (internal size 1800 mm x 600 mm x 11400 mm height including free board of 450 mm)
2
36187
72374
... More
Constructing inspection pit of inside measurement 600 mm x 600 mm x upto 600 mm (depth)with 250 mm thick 1st class brick work in cement mortar (1:4)on all sides ,bottom of the pit consisting of 100 mm thick cement concrete(1:3:6)with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4)cement plaster to inside walls and outside walls upto GL and 20 mm thick (1:4)plaster to bottom of the pit,providing necessary invert with cement concrete (1:3:6)with stone chips as per direction,neat cement finishing to entire internal surfaces,top of the pit covered with 100 mm thick RCC slab (1:1.5:3)with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster(1:4) in all external surfaces of the slab and one 560 mm dia RCC manhole cover of approved make supplied,fitted and fixed in the slab with necessary fittings,necessary earth work in excavation in all sorts of soil,filling sides of the pit with earth and removing spoils after work complete in all respects with all costs of labour and materials. -with pakur variety. using Tor steel / Mild Steel (JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL)
2
7248
14496
... More
Construction of circular soak well 2.5 mtrs deep in all types of sandy soils with dry brick work upto 1.6 mtrs from the bottom having 150 mm intermediate cement brick work (4:1) band all round and cement brick work (4:1) upto 0.90mtrs from top with 20 mm thick cement plastering (4:1) to inside face upto the depth of cement brick work, 15 mm thick cement plaster (4:1) on outer face from top of the well upto GL and 6 mm thick cement plaster (4:1) on top of the RCC cover slab including filling bottom 1.00 mtr of inside of the well with jhama metal (50 mm to 63 mm size) including RCC cover slab of 100 mm thickness with cement concrete (3:1.5:1) with stone chips with necessary reinforcement and shuttering including one 560 mm dia RCC manhole cover (heavy type) of approved make supplied ,fitted and fixed in the cover slab with necessary fittings , making necessary arrangements for pipe connections ,excavation of well including shoring dewatering and removing the excess earth form the premises as per direction complete in all respect with all costs of labour and materials. Using Tor steel / Mild Steel ( JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL)
2
16621
33242
... More
Saucer drain up to 150 mm width and 75mm depth including cement
plaster(3:1) and neat cement finishing. (cement=224.0 Kg/100 mtr)
24
32
791.76
... More
Supplying, fitting & fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make supplied ,fitted fixed in position complete excluding P or S trap.(excluding cost of concrete for fitting) i) 530mm x 410 mm
2
1522
3044
... More
Supplying fitting and fixing 10 litre PVC low-down cistern of conforming to I.S. specification with PVC fitting complete C.I. make with either side or bottom brackets including two coats of painting to brackets.
2
1015
2030
... More
Labour for hoisting plastic water storage tank
2
96
192
... More
Supplying PVC water storage tank of approved quality with closed lid (Black)-Multilayer. A) 500 litre capacity.
2
2584
5168
... More
Labour for Punching hole in plastic water storage tank upto 50mm dia
8
19
152
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) a) For Exposed Work
-
-
-
... More
a)15 mm dia
40
101
4040
... More
b)20 mm dia
30
129
3870
... More
Supplying,fitting and fixing alloy iron with brass spindle bib cock/stop
cock of approved brand and make, spray painted and tested to 21 kg
per sq.cm. - 15 mm. dia.
4
169
676
... More
Supplying,fitting and fixing approved patent vent cowl I.C.I.
conforming to I.S.S and painting two coats to the exposed surface
with approved paint complete.(Payment of painting will however be
paid seperately).- 100 mm dia.
2
367
734
... More
Supplying,fitting and fixing pillar cock of approved make.
A)i)CP Pillar Cock-15 mm (equivalent to code no-507 & Model -
Tropical/sumthing special of ESSCO or similar brand).
2
555
1110
... More
Supplying fitting & fixinng with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.5 mtrs depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides) (i) 100 mm dia
16
294
4704
... More
Drilling and tapping C.I. main.- upto 15 mm. dia.
2
160
320
... More
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.
(i) 450 mm X 300 mm
2
367
734
... More
Wash basin white vitreous china of approved make(without fittings)supplied , fitted and fixed in position on 75mm x 75mm x 75mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (a) 450 mm x 300 mm size.
2
1155
2310
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible,with both ends coupling with heavy brass C.P. nut,15 mm dia. (a)900 mm long.
2
147
294
... More
Cutting holes through wall,roof or cornice and mending good damages.
4
68
272
... More
Supplying , fitting and fixing cast iron 'p' or 's' trap conforming to I.S. 3989/1970 and 1729/1964 including lead caulked joints and painting two coats to the exposed surface.(painting to be paid seperately).- 'P' Trap - 100 mm.
2
948
1896
... More
Add GST @ 18% on all item
1
210661
210661.88
... More
Add CESS @ 1% on all items including GST
1
13810
13810.06
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%