North Bengal Development Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
North Bengal Development Department - NBDD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Oct 2022
Closing DateCancelled
Tender Amount₹ 2,79,46,928
Costs
EMD
₹ 5,58,939Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_NBDD_416442_4Bid Award Id
ViewTender No
NBDD/BS/SE/ NIe-T-07(SL No.01,02,03,04) /2022-23Tender Authority
North Bengal Development Department ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity).
Ground Floor
148.92
-
163018.36
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. Ground Floor
450.93
-
599.99
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. Ground Floor
554.83
-
28.28
... More
(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety
In ground floor
(a) 1:3:6 proportion. Ground Floor
31.36
-
6754.62
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety.
Ground Floor
33.09
-
8779.28
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
M 25 Grade
(i) Pakur Variety
Ground Floor
212.05
-
10256.63
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
(a) For works in foundation, basement and upto roof of ground floor/upto 4 m
I. SAIL/ TATA/RINL
In Ground Floor
24.97
-
82596.54
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
(f) 25 mm to 30 mm shuttering without staging in foundation
Ground Floor
378.9
-
236.42
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Ground Floor
754.32
-
377.82
... More
Brick work with 1st class bricks in cement mortar (1:4)
(a) In foundation and plinth
Ground Floor
25.72
-
9120.64
... More
Brick work with 1st class bricks in cement mortar (1:4)
(b) In superstructure, Ground floor
53.29
-
9423.35
... More
125mm. thick brick work with 1st class bricks in cement mortar (1:4) Ground Floor
379.34
-
1174.19
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).
(ii) With 1:4 cement mortar
(a) 20 mm thick plaster
External Wall Ground Floor
428.3
-
279.63
... More
(ii) With 1:4 cement mortar
(b) 15 mm thick plaster
Internal Wall Ground Floor
1013.45
-
238.91
... More
(ii) With 1:4 cement mortar
(c) 10 mm thick plaster
Ceiling plaster Ground Floor
370.39
-
188.68
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi/ Udaypur pink / Udaypur Green / Black Bhaslana
(i) Area of each Slab/tile upto 0.3 sq.m. Ground Floor
54.56
-
2034.8
... More
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin- Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) (a) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick) etc.]
209.88
-
2125.75
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc
(B) Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative, Ground Floor
29.85
-
1149.75
... More
(a) M.S.or W.I. Ornamental grill of approved design joints
continuously welded with M.S, W.I. Flats and bars of windows,
railing etc. fitted and fixed with necessary screws and lugs in ground
floor.
Ground Floor
4.5
-
13700.64
... More
Supplying, fitting and fixing windows and ventilators with or without
integrated grills conforming to IS 1038-1975 and manufactured from
rolled steel sections conforming to IS 7452-1974 with non-friction
projecting type, box type hinges, glazing clips, lugs locking bracket,
handle plate etc, including hoisting in position, straightening if
required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20
mm down cutting holes and mending good damages to match with
existing surface complete in all respect excluding glazing.r. (b) Openable steel windows as per IS sizes with side hung shutters
and horizotal glazing bars. [The extra rate admissible for the
openable portion only] Ground Floor
26.46
-
2986.37
... More
(a) Fixed type steel windows as per IS sizes with horizontal glazing
bars. Ground Floor
2.52
-
2047.02
... More
(viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.
In Ground Floor
463.68
-
133.03
... More
Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom
guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in
fully stretched position 20mm x 5mm M.S. flats as collapsible
bracings properly rivetted and washered including 38mm steel
rollers including locking arrangements, fitted and fixed in position
with lugs set in cement concrete and including cutting necessary
holes, chasing etc. in walls, floors etc. and making good damages
complete. In Ground Floor
5.04
-
5963.23
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(c) Sal : Siliguri.
In Ground Floor
0.29
-
111311.44
... More
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings
In ground floor
(a) 35mm thick shutters (single leaf)
11.97
-
5883.14
... More
(c) Double leaf shutters [Note: Mode of measurement-Measurement shall bemade on the basis of area of shutter] Ground Floor
2.52
-
33.94
... More
Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. Ground Floor.
9.9
-
2754.25
... More
Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge. Ground Floor
9.9
-
544.33
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx). Ground Floor
18
-
14394.29
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
(b) 40mm X 6mm, 200mm Length. Ground Floor
36
-
27.21
... More
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
(vi) 125 x 63 x 3.2mm. Ground Floor
24
-
104.52
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
(v) 150mm long x 12mm dia. bolt. Ground Floor
8
-
119.45
... More
(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. Ground Floor
6
-
2649.04
... More
(i) Door stopper.(Brass), Ground Floor
6
-
166.97
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
(a) With continuous plate base (Hexagonal/ Round rod)
(iv) 125 mm grip x 10 mm dia rod. Ground Floor
2
-
150.68
... More
(iv) Two point nose steel handle including fitting and fixing.
Ground Floor
34
-
71.94
... More
(vi) steel peg stay 300 mm long including fitting and fixing.
Ground Floor
34
-
50.23
... More
Labour for Chipping of concrete surface before taking up Plastering work. Ground Floor
370.39
-
23.76
... More
Rendering the Surface of walls and ceiling with White Cement base
WATER PROOF wall putty of approved make & brand.(1.5 mm thick) Ground Floor
1812.14
-
165.61
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
(b) Two Coats ii) Solvent based interior grade Acrylic Primer
1383.84
-
6732.9
... More
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.
Two Coats, Ground Floor
1383.84
-
96.38
... More
Applying Exterior grade Acrylic primer of approved quality and brand
on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
Ground Floor (b) Two Coats
278.77
-
6244.22
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)
c) Super Protective 100% Acrylic Emulsion.
i)Ground floor
278.77
-
133.03
... More
(b) Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc. Ground Floor
12.06
-
51.58
... More
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. Ground Floor
24.86
-
40.72
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc.including using of approved putty etc. on the surface,if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (ii) Two coats (white in shade), Ground Floor
11.97
-
107.24
... More
(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white), Ground Floor
24.86
-
108.6
... More
Supplying best Indian figured glass viz. hammered, fluted, ribbed,
pinhead etc. type including cutting to required sizes, setting on putty bases and fitted and fixed with nails and putty complete.(In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (White), Ground Floor
40.86
-
575.55
... More
Extra for fixing glass panes in steel window. Ground Floor
40.86
-
75.79
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
M 25 Grade
(i) Pakur Variety
First Floor
94.09
-
10385.58
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
(a) For works in foundation, basement and upto roof of ground floor/upto 4 m
I. SAIL/ TATA/RINL
First Floor
11.08
-
83180.23
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. First Floor
748.64
-
398.18
... More
Brick work with 1st class bricks in cement mortar (1:4)
(b) In superstructure, First floor
54.91
-
9574.02
... More
125mm. thick brick work with 1st class bricks in cement mortar (1:4) First Floor
309.57
-
1190.47
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).
(ii) With 1:4 cement mortar
(a) 20 mm thick plaster
External Wall First Floor
235.42
-
285.06
... More
(ii) With 1:4 cement mortar
(b) 15 mm thick plaster
Internal Wall First Floor
925.35
-
244.34
... More
(ii) With 1:4 cement mortar
(c) 10 mm thick plaster
Ceiling plaster First Floor
348.2
-
194.11
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in First Floor. {White cement and Pigment to be supplied by the Agenc (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi/ Udaypur pink / Udaypur Green / Black Bhaslana
(i) Area of each Slab/tile upto 0.3 sq.m.
69.82
-
2051.09
... More
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone
floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin- Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) (a) ln First Floor:(size not Iess than 600mmX 600 mm X 9.5 mm thick) etc.]
200.41
-
2142.04
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc
(B) Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m
(ii) Other than coloured decorative including white, First Floor
71.4
-
1087.31
... More
Supplying, fitting and fixing windows and ventilators with or without
integrated grills conforming to IS 1038-1975 and manufactured from
rolled steel sections conforming to IS 7452-1974 with non-friction
projecting type, box type hinges, glazing clips, lugs locking bracket,
handle plate etc, including hoisting in position, straightening if
required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20
mm down cutting holes and mending good damages to match with
existing surface complete in all respect excluding glazing.r. (b) Openable steel windows as per IS sizes with side hung shutters
and horizotal glazing bars. [The extra rate admissible for the
openable portion only] First Floor
23.58
-
3022.2
... More
(a) Fixed type steel windows as per IS sizes with horizontal glazing
bars.
First Floor
5.4
-
2071.59
... More
(viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.
First Floor
506.88
-
134.62
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(c) Sal : Siliguri.
First Floor
0.19
-
111582.93
... More
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings
First Floor
(a) 35mm thick shutters (single leaf)
7.56
-
5902.15
... More
Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.
In first floor.
15.75
-
2754.25
... More
Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge. (b) Pre-laminated Colour.First Floor
49.5
-
719.44
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm
dia and 900mm height vertical balustrade at every two alternative
steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal
Strainless steel pipe and base/cover plate with Strainless Steel
GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat
finish, complete as per direction of the Engineer-in-charge.
Weight of Strainless Steel railing per metre 6.5 Kg (approx), First Floor
15
-
14394.29
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (b) 40mm X 6mm, 200mm Length, First Floor
24
-
27.15
... More
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
(vi) 125 x 63 x 3.2mm, First Floor
56
-
104.52
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
(v) 150mm long x 12mm dia. bolt. First Floor
14
-
119.45
... More
(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. First Floor
4
-
2649.04
... More
(i) Door stopper.(Brass) First Floor
4
-
166.97
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
(a) With continuous plate base (Hexagonal/ Round rod)
(iv) 125 mm grip x 10 mm dia rod. First Floor
2
-
150.68
... More
(iv) Two point nose steel handle including fitting and fixing. First Floor
34
-
72.8
... More
(vi) steel peg stay 300 mm long including fitting and fixing. First Floor
34
-
50.82
... More
Labour for Chipping of concrete surface before taking up Plastering work. First Floor
348.2
-
23.76
... More
Rendering the Surface of walls and ceiling with White Cement base
WATER PROOF wall putty of approved make & brand.(1.5 mm thick) First Floor
1508.97
-
166.59
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In first Floor)
(b) Two Coats ii) Solvent based interior grade Acrylic Primer
1273.55
-
6732.9
... More
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.
Two Coats, First Floor
1273.55
-
97.34
... More
Applying Exterior grade Acrylic primer of approved quality and brand
on plastered or cencrete surface old or new surface to receive
decorative textured (matt finish) or smooth finish acrylic exterior
emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
First Floor (b) Two Coats
235.42
-
6340.6
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)
c) Super Protective 100% Acrylic Emulsion.
First Floor
235.42
-
133.99
... More
(b) Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc. First Floor
19.66
-
51.58
... More
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. First Floor
31.5
-
40.72
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc.including using of approved putty etc. on the surface,if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (ii) Two coats (white in shade), First Floor
7.56
-
107.24
... More
(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white), First Floor
31.5
-
108.6
... More
Supplying best Indian figured glass viz. hammered, fluted, ribbed,
pinhead etc. type including cutting to required sizes, setting on putty bases and fitted and fixed with nails and putty complete.(In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (White), First Floor
31.5
-
575.55
... More
Extra for fixing glass panes in steel window. First Floor
31.5
-
75.79
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
M 25 Grade
(i) Pakur Variety
Second Floor
53.12
-
10514.54
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
(a) For works in foundation, basement and upto roof of ground floor/upto 4 m
I. SAIL/ TATA/RINL
Second Floor
6.25
-
83763.93
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Second Floor
711.47
-
418.54
... More
Brick work with 1st class bricks in cement mortar (1:4)b) In Super Structure, second Floor.
55.4
-
9724.7
... More
125mm. thick brick work with 1st class bricks in cement mortar (1:4) Second Floor
113.58
-
1206.76
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).
(ii) With 1:4 cement mortar
(a) 20 mm thick plaster
External Wall Second Floor
280.29
-
290.49
... More
(ii) With 1:4 cement mortar
(b) 15 mm thick plaster
Internal Wall Second Floor
770.74
-
249.77
... More
(ii) With 1:4 cement mortar
(c) 10 mm thick plaster
Ceiling plaster Second Floor
347.53
-
199.54
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi/ Udaypur pink / Udaypur Green / Black Bhaslana
(i) Area of each Slab/tile upto 0.3 sq.m. Second Floor
66.62
-
2067.38
... More
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone
floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete as per direction of Engineerin- Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) (size not Iess than 600mmX 600 mm X 9.5 mm thick) etc.] Second Floor
253.94
-
2158.33
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc
(B) Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m
(ii) Other than coloured decorative including white, Second Floor
24.29
-
1094.1
... More
Supplying, fitting and fixing windows and ventilators with or without
integrated grills conforming to IS 1038-1975 and manufactured from
rolled steel sections conforming to IS 7452-1974 with non-friction
projecting type, box type hinges, glazing clips, lugs locking bracket,
handle plate etc, including hoisting in position, straightening if
required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20
mm down cutting holes and mending good damages to match with
existing surface complete in all respect excluding glazing.r. (b) Openable steel windows as per IS sizes with side hung shutters
and horizotal glazing bars. [The extra rate admissible for the
openable portion only] Second Floor
23.04
-
3058.47
... More
(a) Fixed type steel windows as per IS sizes with horizontal glazing
bars.
2.52
-
2096.44
... More
(viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.
Second Floor
403.2
-
136.24
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(c) Sal : Siliguri.
Second Floor
0.11
-
111854.41
... More
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings
In Second Floor
(a) 35mm thick shutters (single leaf)
4.2
-
5921.15
... More
(c) Double leaf shutters [Note: Mode of measurement-Measurement shall bemade on the basis of area of shutter] Second Floor
6.3
-
33.94
... More
Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In Second Floor.
3.15
-
2754.25
... More
Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge. (b) Pre-laminated Colour.
Second Floor
24.75
-
738.45
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm
dia and 900mm height vertical balustrade at every two alternative
steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal
Strainless steel pipe and base/cover plate with Strainless Steel
GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat
finish, complete as per direction of the Engineer-in-charge.
Weight of Strainless Steel railing per metre 6.5 Kg (approx), Second Floor
20
-
14394.29
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
(b) 40mm X 6mm, 200mm Length, Second Floor
12
-
27.15
... More
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
(vi) 125 x 63 x 3.2mm, Second Floor
16
-
104.52
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
(v) 150mm long x 12mm dia. bolt. Second Floor
4
-
119.45
... More
(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. Second Floor
2
-
2649.04
... More
(i) Door stopper.(Brass) Second Floor
4
-
166.97
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
(a) With continuous plate base (Hexagonal/ Round rod)
(iv) 125 mm grip x 10 mm dia rod. Second Floor
12
-
150.68
... More
(iv) Two point nose steel handle including fitting and fixing. Second Floor
34
-
73.74
... More
(vi) steel peg stay 300 mm long including fitting and fixing. Second Floor
34
-
51.44
... More
Rendering the Surface of walls and ceiling with White Cement base
WATER PROOF wall putty of approved make & brand.(1.5 mm thick) Second Floor
1398.56
-
167.56
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (Second Floorr)
(b) Two Coats ii) Solvent based interior grade Acrylic Primer
833.48
-
6732.9
... More
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.
Two Coats. Second Floor
833.48
-
98.31
... More
Applying Exterior grade Acrylic primer of approved quality and brand
on plastered or cencrete surface old or new surface to receive
decorative textured (matt finish) or smooth finish acrylic exterior
emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
Second Floor (b) Two Coats
234.23
-
6436.98
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)
c) Super Protective 100% Acrylic Emulsion.
Second Floor
236.01
-
134.96
... More
(b) Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand papering etc. Second Floor
8.19
-
51.58
... More
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Second Floor
15.3
-
40.72
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc.including using of approved putty etc. on the surface,if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (ii) Two coats (white in shade) Second Floor
6.3
-
107.24
... More
(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) Second Floor
15.3
-
108.6
... More
Supplying best Indian figured glass viz. hammered, fluted, ribbed, pinhead etc. type including cutting to required sizes, setting on putty bases and fitted and fixed with nails and putty complete.(In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (White) Second Floor
15.3
-
575.55
... More
Extra for fixing glass panes in steel window. Second Floor
15.3
-
75.79
... More
M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc.complete) Second Floor
253.94
-
1631.64
... More
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.
Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.
i) For roof truss works
a) Span up to 20 Mtr
10.69
-
103883.84
... More
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).
(i) In Roof:-
a) With 0.5 mm thick sheet
344.21
-
1229.84
... More
Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping).
(A) 300 mm lapping each way
(a) With 0.71 mm sheet
18.38
-
534.83
... More
Supplying, fitting and fixing glass reinforced polyester translucent ridging 450 mm long each way as per IS 2866 - 1989 fitted and fixed with bolts J hooked screws and bitumen washers complete.
a) 1.6mm +/- 0.2 mm thick sheet.
i) Natural white or tinted blue colour
36.75
-
757.45
... More
Plum concrete work with 40 % cement concrete with 30 mm down graded stone metal and 60 % stone boulder of size 150 mm and above, placed in position as directed excluding shuttering if any. (i) (1:3:6) proportion Ground Floor
206.4
-
4643.8
... More
Filling properly the empty sausage crates with boulders of any size & shape with hand packing after preparation of bed of placement, placing the crate in position, carriage of boulders from road stacks with a lead upto 150m etc. complete in all respect including stitching the rest of the crate with wire (passage for filling boulders) after filling up the crate with boulders and launching the crate in position if necessary and as directed by the Engineer-in charge. (Including rate of Crate)
192
-
3711.35
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.
210.45
-
46.15
... More
INTERNAL ROAD Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
a) Depth of excavation not exceeding 1500mm.
90
-
13491.82
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
150
-
599.99
... More
(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety
In ground floor
(a) 1:3:6 proportion
15
-
6754.62
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety
22.5
-
8779.29
... More
Sanitary & Plumbing Works:
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
With Bazree (N.B Variety) (SAIL/TATA/RINL)
10
-
10738.71
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials.
For 30 users With Bazree (N.B Varity) (SAIL/TATA/RINL)
1
-
92824.46
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the excess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m (SAIL/TATA/RINL)
1
-
26003.12
... More
Supply, Fitting & Fixing 3 layer PP-R (Poly-propylene Random Copolymer) U.V STABILISED and anti-microbial fusion welded pipes conforming to IS:15801-2008.for hot & cold water supply including necessary fittings and joining materials as required complete as per direction of Engineer-in-charge. (Payment will be made on the centre line measurement of the total pipe line including all specials. No seperate payment will be made for accessories, specials etc.) A. For Exposed Work
I)SDR 7.4/PN-16 Pipes
85
-
302.94
... More
25 mm (outer dia )
105
-
274.99
... More
20 mm (outer dia )
65
-
197.06
... More
B. For Concealed Work
I)SDR 7.4/PN-16 Pipes
25 mm (outer dia )
140
-
317.64
... More
20 mm (outer dia )
100
-
245.58
... More
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).
(vi) 32 mm dia
4
-
1705.85
... More
(vii) 25 mm dia
4
-
1144.1
... More
(viii) 20 mm dia
4
-
888.22
... More
SOIL/WASTE/VENT/PIPES & SPECIALS
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length 75mm
80
-
288.23
... More
110 mm
260
-
429.4
... More
(B) Fittings (ii) Plain Tee
75 mm
15
-
67.65
... More
(ii) Plain Tee 110 mm
15
-
125
... More
(iii) Door Tee
75 mm
15
-
148.53
... More
(iii) Door Tee 110 mm
15
-
286.76
... More
v) Plain Y
75 mm
15
-
150
... More
v) Plain Y 110 mm
15
-
302.94
... More
vi) Door Y (LH) & (RH)
75 mm
10
-
205.88
... More
vi) Door Y (LH) & (RH)
110 mm
15
-
405.87
... More
vii) Double Y
75 mm
15
-
220.58
... More
vii) Double Y
110 mm
15
-
402.93
... More
ix) Bend 45º
75 mm
15
-
79.41
... More
ix) Bend 45º
110 mm
15
-
130.88
... More
xi) Door Bend (T.S.)
75 mm
15
-
122.06
... More
xi) Door Bend (T.S.)
110 mm
15
-
216.17
... More
xv) Vent Cowl
110 mm
15
-
48.53
... More
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A) Above ground. (ii) 110 mm dia.
135
-
77.37
... More
(B) Under ground
(ii) 110 mm dia.
125
-
123.53
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (b) With 'S' trap
12
-
2223.49
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.
(iv) Bestolite (solid type) white
12
-
1051.45
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
12
-
1492.62
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(ii) 550 mm X 400 mm size
16
-
3247
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only
(i) 530 mm X 430 mm x 180 mm
1
-
4830.79
... More
Supplying, fitting and fixing pillar cock of approved make.
f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).
14
-
1866.14
... More
Supplying, fitting and fixing bib cock or stop cock.
(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
16
-
792.63
... More
Supplying, fitting and fixing bib cock or stop cock.
(ii) Chromium plated Bib Cock long body with wall flange with aerator(Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of
ESSCO or similar brand)
1
-
969.1
... More
(i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand)
36
-
724.99
... More
Supplying, fitting and fixing shower of approved brand and make.
(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
6
-
664.69
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
(ii) 450 mm long
24
-
120.59
... More
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (ii) 750 mm long
16
-
86.76
... More
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm
16
-
711.75
... More
Supplying, fitting and fixing liquid soap container.
(b) PTMT(Prayag or equivalent)
16
-
308.82
... More
Supplying, fitting and fixing towel rail with two brackets. (ii) 25 mm dia. and 600 mm long
18
-
632.34
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity
4
-
7541.03
... More
Labour for hoisting plastic water storage tank.
(i) Upto 1500 litre capacity.
4
-
130.31
... More
Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials.No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
100 mm PVC Pipes
180
-
1667.62
... More
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (ii) 32 mm dia. medium quality
100
-
530.08
... More
Electrical Works:
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR'
PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish a) Avg run 8 mtr.
210
-
1421.86
... More
b) Avg run 12 mtr.
100
-
1940.91
... More
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
On Board.
20
-
323.92
... More
Supplying and fixing double door 6WAY Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, with 1 No. 160 A FP MCCB as incomer and 4 NOS 63A TP MCB, 2 NOS 32 A TP MCB as outgoing complete on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (MAKE- Havells/Legrand/Seimens)
1
-
10619.08
... More
Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for 6WAY TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment.
1
-
1394.54
... More
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the
damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 6 way Enclosure (607716).
3
-
4558.28
... More
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.
2+12 WAY Enclosure (607712)
7
-
2285.65
... More
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 4 Way.
2
-
411.08
... More
Supplying and fixing 160 A, 415V, TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.
1
-
12243.88
... More
Supplying and fixing 160A ,415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed
magnetic setting in existing DBs / enclosure and necessary connection.
1
-
13720.38
... More
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection
63A FP
3
-
2380.61
... More
63A TP
4
-
1862.86
... More
32A TP
2
-
1100.54
... More
40A DP
7
-
1220.23
... More
6-32 SP
138
-
247.17
... More
Supplying and fixing 19 mm dia and 3 mm thick polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)
4500
-
46.83
... More
Supplying and Drawing 1.1 KV single core stranded 'FR'
PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe by the GI fish wire and making necy. connection as required. as per instruction of EIC.
a) 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC
200
-
641.33
... More
b) 2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC
600
-
322.62
... More
c)2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC
900
-
123.58
... More
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
800
-
84.56
... More
3 x 22/0.3 (3x1.5 sqmm)
2000
-
62.44
... More
Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
67
-
490.43
... More
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
48
-
593.2
... More
Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener
6
-
130.09
... More
Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts &
washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20
PVC insulated flexible copper wire 0.5 mt. length
46
-
119.68
... More
Fixing only 300 mm dia exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.
7
-
427.99
... More
Fixing only bulk head /ceiling fitting on wall /ceiling by screws etc.
249
-
72.85
... More
Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.
3
-
706.38
... More
Supply of 240V LED tube light mounting rail lighting luminaire to be fixed on ceiling for TLED lamp with necessary connection and earthing attachment .(Brand approved by EIC)
6
-
1045.23
... More
Supply of high speed wall mounting bracket fan 240 V 450 mm sweep fixed with close mesh guard , pull chain arrangement for speed control and sturd and heavy duty blades for higher displacement of air (Brand approved by EIC)
46
-
5167.1
... More
a) Supply of 250 V 300 mm. sweep (ISI) high speed exhaust fan (Brand approved by EIC)
7
-
3594.92
... More
Supply of surface/recess mounted 18 watt slim LED panel with aesthetic finish powder coated in white housing luminaire (square/round) to be fixed on ceiling at in corridor, stair etc. with all arrangement and necessary connection. (Brand approved by EIC)
148
-
1542.96
... More
Supply of surface/recess mounted36 watt slim LED panel with aesthetic finish powder coated in white housing luminaire (square) to be fixed on ceiling with all arrangement and necessary connection.(Brand approved by EIC)
12
-
4827.96
... More
Supply and fixing of 60 W flood light light luminaire with high power LED and unique peanut lenses, wattage not more than 120 W as per EIC
3
-
5972.74
... More
Supply and fixing of 120 W Street light luminaire with high power LED and unique peanut lenses, wattage not more than 120 W as per EIC
6
-
11945.47
... More
Supply of decorative wall bracket light of glass metal combination including E27, 1x24 w luminaire for single cottage Bedroom.( Make:- Philips-36366/43 crafted antique or Equivalent)
89
-
4525
... More
Supply & installation of 250V 2000 W room heater with 3 Heat Setting,9 Fins and Thermostat control
Technology.(Bajaj OFR-9 Room Heater or eqivalent)
20
-
9599
... More
S&F of 250V 2000 W 25 Ltr. wall mounted storage water heater built in five star rating electricity consumption system having asthetic colour. ( RACOLD-ETERNO 2 SP/ VENUS- Lyra Smart/BAJAJ ISI approved)
7
-
11603
... More
a)S & F50 mm dia medium gauge GI pipe (ISI-M) for cable protection with necessary 25 mm × 6 mm MS flat made clamp and painting of the same.
30
-
429.29
... More
Excavation of soil for installation of Earth Electrode and filling & ramming.-For Morrum Soil
4
-
372.05
... More
i) Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick × 3.04 mtr long and 1 × 4 SWG (Hot dip) wire 4 mtr long) 13 mm dia × 80 mm long GI bolts double washers incl. S & F 15 mm dia GI pipe protection (1 mtr long) to be filled with bitumen party under the ground level and partly above ground level driver to an average depth of 3.65 metre below the ground level & restoring the surface duly rammed.
4
-
1780.9
... More
Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt,double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts
2
-
6958.41
... More
S & F earth bus bar of GI (Hot Dip) MS flat of 50 mm × 6 mm on wall is having clearance of 8 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers spacing insulators tc. As required.
37
-
280.99
... More
Supply & fixing 6 SWG GI wire (Hot dip) including providing socketing at both ends.
150
-
16.91
... More
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe including Extra for treatment of soil by using salt & charcoal or coke for plate electrode
6
-
1190.31
... More
Supply 1.1 KV grade PVC Armoured XLPE insulated AL conductor cable .(Brand approved by EIC)
i) 3.5 core X50 sq.mm.
100
-
559.45
... More
ii)2 core X 10 sq.mm
150
-
182.17
... More
laying of 1.1 KV grade PVC /A aluminium conductor2 core X 10sq.mm recessed in wall 1 X 10 SWG GI earthing wire mainly recessed in wall &partially shadding.
150
-
165.21
... More
Laying of one No. cable above 35 sqmm and upto 185 sqmm in
underground trench 460mm wide x 760mm average depth, with
brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed
70
-
223.75
... More
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core
30
-
55.94
... More
S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture -proof entry of XLPE/PVC armoured cables as bellow.
(i) 3.5 core X50 sq.mm.
6
-
256.27
... More
ii) 2 core X 10 sq.mm .
1
-
149.6
... More
Finishing the end of following XLPE/PVC armoured cable by crimping method incl.S & F solderless socket (Dowels make,) tapes,anticorrosive paste & joining materials.
(i) 3.5 core X50 sq.mm.
6
-
271.88
... More
ii)2 core X 10 sq. mm.
1
-
44.23
... More
Fixing outdoor type fluorescent/SV/MV light fitting on pole
including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single
core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting
6
-
1736.67
... More
Supplying & Fixing GI waterproof type looping cable box size
200x150x100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint
6
-
595.8
... More
Supply & laying of 3 X 2.50 sq. mm PVC insulated copper conductor FR wire from loop box to fittings in 15 mm dia polythene pipe including connection as required.
100
-
109.27
... More
Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS : 2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.
a)Capacity 4.5 kg.
12
-
6775.89
... More
Supply, Testing & Comissioning of 62.5 KVA Silent Diesel Generator Set, water cooled, developing of BS 5514/ISO3046 & confirming to IS 10002 with 12/24 volt self starter arrangement including rated DC 12/24V battery, mechanical governor with Gen Set controller, natural aspiration having dry tye air filter couled with Alternator capable of developing 62.5 KVA at 415V 50Hz at 1500 rpm, 3-phase 4-wire conforming to BS EN 60034-1/IS:4722 and will be suitable for tropical condition brushless type, screen protected, revolving field self excited self regulator through AVR, IP protection: 23, permissible overload of 10% for one hour in 12 hrs of operation. Class-H insulation, voltage regulation+1% DG mounted on base with AVM pad complete all as direted adn housed in accoustic enclosure required for Emergency Power Supply including standard genset controller unit with A.M.F panel with safeties and display parameters.(Make-Jakson/Volvo/Caterpillar/Perkinson)
1
-
966610.4
... More
Supply of Diesel during commissioning of DG set
68
-
113.12
... More
Installation,Testing ,Commissioning of the Generator above the CC foundation as required including trial run on full load etc & required loading & unloading as per direction of Engg incharge.
1
-
5656
... More
Earth excavation of foundation trenches or drains, in all sorts of soil ( including mixed soil but excluding laterite or sandstone ) including removing, spreading or stacking the spoils with in a lead of 75 m as directed . The item includes necessary trimming the sides of trenches , leveling dressing and ramming the bottom, bailling out water as required complete. (a) Depth of excavation not exceeding 1500 mm.
12
-
152.62
... More
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
20
-
412.89
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
(a) River bazree.
3
-
4439.96
... More
Brick work with 1st class bricks in cement mortar (1:4)
In foundation and plinth
4.5
-
5792.88
... More
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
(B) Do - by fine sand
12
-
716.36
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture]
M 20 Grade
N.B. Variety (Stone Metal)
5
-
5958.03
... More
Plaster ( to wall, floor ,ceiling etc ) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating , noising drip course , scaffolding / staging where neccy. (ground floor ). [ Excluding cost of chipping over concrete surface).
(a)with 1:4 cement mortar 15mm thick plaster.
27
-
196.83
... More
Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc.
27
-
42.99
... More
Supplying and fixing 125A, 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts
bolts etc
1
-
11145.94
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements