NHPC Limited Tender

Ordinary cement concrete ( mix 1:1.5:3) with graded stone chips with (20 mm normal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes(ii) River Bazree.

Hire and labour charges for shuttering with centering and necessary staging upto 4.0m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of work (upto roof of ground floor) (a) 25 mm to 30mm thick wooden shuttering as per decision and direction of the EIC.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars,stirrups,binders etc. initial straightening and removal of loose rust ( if necessary),cutting to requisite length hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every intersection,complete as per drawing and direction.(a) For works in foundation,basement and upto roof of ground floor/upto 4m) (i)Tor steel/Mild steel II. Other than SAIL/ TATA/RINL

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to I.S:226,IS: 808 & SP (6)- 1964 connected to one another with bracket, gusset, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal are welding conforming to I.S: 816-1956 & I.S: 9595 using electrodes of approved make and brand conforming to I.S: 814-1957. haulage, hosting and erection all complete. The rates includes the cost of rolled steel section, consumable such as electrodes, gas and hire charges of all tools and plants and labour required for the work including all incidental charges such as electricity charges, labour insurance charges etc.i) For structural members of specified sections weighing not less than 22.5 Kg/m.

Rubble masonary in cement (1:6) with hard dressed stones from approved quaries and clean coarse and washed sand including carriage of all materials to site(b) (a) In Road and Jhora Work (i) In Ground Floor

Plaster (to wall ,floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course scaffolding/staging where necessary (Ground floor) (c) 10 mm thick with 1:4 cement mortar

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand, including smoothing surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On timber or plaster surface with Super gloss (hi- gloss) two coats (with any shade except white) on steel or other metal surface

Supplying,fitting,fixing,chain link fencing of approved quality with RCC posts,wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips,bolts and nuts etc.(The rate is exclusive of the cost of posts) 75mmx75mmx6g

Cement washing including cleaning and smoothening surface thoroughly (cement to be used @15 kg./100 sq.m. of surface for one coat and @25 kg./100 sq.m of surface for two coats): External surface (Ground floor) (b) Two coats (on new works only).

Appling decorative cement based paint of approved quality after preparing the surface including scraping the same throughly (plastered or concrete surface) as per manufacturer's specification. In ground floor (iii) Two coats