New Town Kolkata Development Authority Tender

Microtunnelling of upto 4C 35 Sqmm Al Ar cable through suitable HDPE Pipe including supply of Supply of HDPE Pipe.

Laying only of upto 4C 35 Sqmm Al Ar cable.

Supply and fixing of Compression type brass gland for 4C 16 Sqmm Al Ar cable.

Supply and fixing of finishing ends for 4C 16 Sqmm Al Ar cable.

Supply and fixing of finishing ends for 4C 10 Sqmm Al Ar cable.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportionand dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly upto 9 Mtr size 0.6x0.6x1.70 mts.

Supply and fixing of 230V,10W,IP-66 Protected LED Bollard Light with all necessary interconnection and earthing attachment as directed by the EIC.[Make:Orient/Havells/Magik][Analysis]

Supply and installation of 1.2m long GI Earth sike.

Connecting the equipments to earth busbar including S & F 8 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Supply of FRP LOOP Box of 200x 140 x 95mm or similar size (Make Sintex/ Macedon/ EPP ) and fixing at street light pole surface including 1no. 4way Connector, 1no. 6A SP MCB in the din rail with necessary connection.

Supply, Erection, Testing and commissioning of double door feeder pillar (With Suitable foundation) outdoor type, stand mounting, dust and vermin proof feeder pillar with IP-55 protection.The panel shall be made out of 14 SWG Cold Rolled Close Annealed (CRCA) Sheet Steel. Panel shall have 2 coat of zinc chromate primer and 2 coat of epoxy paint both inside and outside.Cable entry shall be at the bottom and through a detachable gland plate of minimum thickness 3mm . Feeder pillar shall have pad-locking arrangement.The dimensions of the panel shall be at least 500mm (L) X 350mm (B) x 400mm(H).FP Must comprise with a suitable danger board and a foundation work.[Inside Park]Incomer: 40A FP 10KA C Curve MCB as per GS(Make- L&T/Legrand/ABB/Havells),4Way Brass Connector-1No. Outgoings: a) S & F 415V 10 A FP 10KA & C Curve MCB on din rail-04 Nos. (Make:L&T/Siemens/ABB/Legrand/Standard) INTERCONNECTION: Inter connections to be made same with a.6 Sqmm single core stranded FR copper wire fromConnector bar of 40A to 40A Incomer MCB. b. 4 Sqmm Single core stranded FR copper wires from Connector Bar to 10A Outgoing MCB. NB.:Incorporate 1 No 40 A 3Pole Power Contactor and 1 No Digital Time Switch as per direction of EIC.