Municipal Corporation Tender

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a)For works in foundation and upto roof of ground floor/upto 4m (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL [Ref : P.W.D (Bldg) 2017, Page-43, 44 Item No. 40.a.(i).II]

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips(20mm nominal size) excluding shuttering and reinforcement if any,in ground floor asper relevent IS codes. i) Pakur variety [Ref : P.W.D.(Bldg.), Page-26 Item No. 10] (Analysis -23)

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof.

(a) In first floor including roof. [P.W.D.(Bldg.). Page- 10, Item-1.(a)]

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. [Ref : P.W.D.(Bldg.), Page -16, Item-16 & 3rd Corrigenda]

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

(b) In Superstructure, ground floor.

(b) In Superstructure, first floor. [Ref: P.W.D (Bldg) 2017, Page - 15, Item.- 7. & 3rd Corrigenda]]

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] [P.W.D.(Bldg.). Page- 107, Item-20]

Supplying and laying true to line and level 20 mm / 25 mm. thick precast roof tiles made of cement conc. with stone chips as per approved strength and density set in 25mm avg. thick cement morter(1:3) and filling up joint (3 mm wide) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg per Sq.m back of tiles and then settting close the precast tiles, finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm. high skirting with the same tiles flushed with the inside surface of parapet wall,finishing the mouth of rain water pipes, curving etc. as necessary complete as per direction of the Engineer-in-charge. (Levelling if necessary may be paid separately) (b) For 25 mm. thick precast tiles (cement 14.6 kg/ Sq.m for underlayer) [Ref : P.W.D.(Bldg.) Page-79, Item-2.(b)]

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. [P.W.D.(Bldg.). Page- 11, Item-10]

Plaster with sand and cement mortar including rounding off corners or chamfering corners as directed and including raking out joints or roughening of concrete surface, curing with cost and carriage of all materials. (a)With 4 : 1 cement mortar. i)15 mm thick plaster [Ref : P.W.D.(Bldg.), Page -189 Item-1 & 3rd Corrigenda]

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. [Ref : P.W.D.(Bldg.), Page -192 Item-15]

Supplying best Indian Sheet glass 5 mm thick including cutting to required sizes,setting on putty bases and fitted and fixed with teak glazing beads (19 mm x 12 mm) including putty and nails as necessary complete. (In all floors for internal wall & upto 6 m height for external wall) [Ref : P.W.D.(Bldg.), Page -205 Item-4]

Taking out rain water down pipe. [Ref : P.W.D.(Bldg.), Page -211 Item-14]

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (ii) 110 mm Dia. B) UPVC Fittings:

a) Plain Tee (ii) 110 mm Dia.

b) Plain Y (ii) 110 mm Dia.

c) Bend 87.5 degree (ii) 110 mm Dia.

d) Shoe (ii) 110 mm Dia. [Ref: P.W.D (Bldg) 2017, Page - 212, Item.- 21]

Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge). [Ref : P.W.D.(Bldg.), Page -198,Item-4]

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coats ii) Solvent based interior grade Acrylic Primer [Ref : P.W.D.(Bldg.), Page -195 Item-7.b.(ii)]

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats [Ref : P.W.D.(Bldg.), Page -196 Item-10]

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (b) Two Coats

In frist Floor: (b) Two Coats

In second Floor: (b) Two Coats [Ref : P.W.D.(Bldg.), Page -196 Item-8.b]

Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground Floor: (b) Two Coats

In frist Floor: (b) Two Coats

In second Floor: (b) Two Coats [Ref : P.W.D.(Bldg.), Page -197 Item-16]

Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface. [Ref : P.W.D.(Bldg.), Page -203 Item-3]

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. [Ref : P.W.D.(Bldg.), Page -200 Item-1.(a).(b)]

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) [Ref : P.W.D.(Bldg.), Page -200 Item-2.(a).(b)]

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 4 mm thick High Pressure Steam Cured Non Asbestos pearl designer Fibre Cement Standard Ceiling Board (Density 1500 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type A Category IV of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor. a) False Ceiling (with 4mm thick Pearl Designer Fibre Cement Board and E-Grid T-2430/1510). [Ref : P.W.D.(Bldg.), Page -160 Item-4]

Add 18 % GST

Add 1 % Cess