Municipal Affairs Department Tender

Page No; 12; Item No; 1, Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints withocal sand.

Page No; 12; Item No;4b Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation.(a) 1:3:6 proportion

Page No; 15; Item No; 7(b), Brick work with 1st class bricks in cement mortar (1:4)(a) In foundation and plinth

Page No; 42; Item No; 36(f), Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works ( upto roof of ground floor ) ( f ) 25 mm to 30 mm shuttering without staging in foundation

Page No; 42; Item No; 36(f), Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works ( upto roof of ground floor ) ( f ) 25 mm to 30 mm shuttering without staging in foundation

Page No; 43; Item No; 40(a)(i(l) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etcnitial straightening and removal of loose rust ( if necessary ) , cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. ( a) For works in foundation, basement and upto roof of ground floor/upto 4 m,( i ) Tor steel/Mild Steel, I. SAIL/ TATA/RINL

Page No; 26; Item No; 10(i), Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Page No; 189; Item No; 1(ii)(b)Plaster ( to wall, floor, ceiling etc. ) with sand and cement mortarincluding rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary ( Ground floor ) .[Excluding cost of chipping over concrete surface], ( b) 15 mm thick plaster

Page No; 140; Item No; 4(a), Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)

Page No; 105; Item No; 15, Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.

Page No; 101; Item No; 2A(i)(b) M.S. structural works with hollow sections ( square or rectangular shape ) conforming to IS: 806-1957 & IS:1161-1958) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1956 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 1957, haulagehoisting and erection all complete.The rate includes the cost of all M.S. Hollow section, alconsumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages ( such as electricity, labour insurance ) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.b) Span beyond 12 Mtr and up to 20.00 Mtr

Page No; 105; Item No; 14, Supplying, fitting, fixing in position rails on any surface. Taking 10.00Mtr X 16kg per Mtr.

Page No; 103; Item No; 17, Locking arrangement for Jail type doors including supplying fitting

Page No; 111; Item No; 2(a), Welding in M.S. structural work with gas or electric: (a) Tack weld

Page No; 200; Item No;1 (b) Priming one coat on timber or plastered surface with synthetic oibound primer of approved quality including smoothening surfaces by sand papering etc.

Page No; 200; Item No;1( a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Page No; 200; Item No;2 ( A ) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : ( a) On timber or plastered surface : ( iv ) Two coats ( with any shade except white ) (Area same as S.L. no- 18)

( b) On steel or other metal surface :( iv ) Two coats ( with any shade except white) ( iv) Two coats ( with any shade except white ) (Area same as S.L. no- 19)

Add 18% GST

Add @ 1% cess