Municipal Affairs Department Tender

EARTHWORK IN EXCAVATION TO INCREASE THE DEPTH OF POND Earthwork in re-excavation / silt clearence in drainge channel in all kinds of soil including sludge, slush mixed all sorts of industrial wastes and municipal garbages, polypacks, carcassess, small khatal effluents, night soil etc., by mathor ( sweeper) / labour a may be necesary and depositing the same in places as directed by the engineer-in-charge, in such a manner, without causing much hindrance to traffic and posing health hazard and making arrangement to maintain the site in workable condition and rouh dressing when dry including making arrangement of bailing out of any seepage water and removal of sand or soil blown from underneath, removal of khatal, temporary latrines, clearing and removing all kinds of semi-compost masses formed by water hyacinth, jungles up to 30 cm girth, and burning the to ashes or removing outside Governmet land in conformity with the Municipal rules, including shoring, shuttering as required, nicking out lines etc ( Measurement : Pre-work and Post work level section, Pre-work section to be taken after removal of water hyacinth and all other floating materials etc. ) ( WB : USOR - 1W Deptt / cl. 1.12 / page C-3) (b) by mechanical means using hydraulic excavators within an initial lead of 30 m and an initial lift of 3.0 m

EARTHWORK IN FILLING Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete.(Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained by fresh excavation (including cost of excavation upto 1,800 mm depth) from land arranged by the Deptt. within a lead of 100 m.

FILLING FOR ASHLAR MASONRY (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (a) by fine sand (payment to be made on measurement of finished quantity) ( WB/ PWD / Bldg/ 4/ pg 2, I-4(B)