Municipal Affairs Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Municipal Affairs Department - MAD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date2 Dec 2024
Closing Date20 Dec 2024
Tender Amount₹ 9,25,474.76
Costs
EMD
₹ 18,540Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Wbmad/ulb/hm/5143/nit-1782 Dt-26.11.2024
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MAD_774684_1Tender No
WBMAD/ULB/HM/5143/NIT-1782Tender Authority
Municipal Affairs Department ViewPurchaser Address
-Website
http://http://www.wburbanservices.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Page No. - 15/8 (a) ( Analysis rate ) Brick work with 1st class bricks in cement mortar (1:6)
(b) In superstructure, ground floor
18
5374
96744.06
Page No. - 16/16 ( Analysis rate ) 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) In ground floor
31
704
21838.26
P - 26/10 ( Analysis rate ) Ordinary cement concrete ( mix 1:1.5:3) with graded stone chips ( 20 mm. nominal size ) excluding shuttering and reinforcement. if any , in ground floor as per relevant IS codes. a) Pakur Variety
1.2
5623
6748.49
Page No. - 42/36
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fittings, fixing and striking out after completion of works. ( upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height. shall be taken as 4 m and extra for woks beyond the initial 4 m. ht. shall be allowed under 12(e) for every 4 m or part thereof. ) (c) steel souldering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
12
359
4308
P - 43/40 ( Analysis rate ) Reinforcement for all reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders, etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. a) For works in foundation , basement and upto roof of ground floor/ upto 4 m. (i) Tor Steel / Mild Steel SHYAM Steel/SRMB/BMASL/SSL/ELECRTOSTEEL/JSW/JSPL
0.12
55087
6610.56
Page No. - 189/1( Analysis rate ) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
With 1:6 cement mortar
20 mm thick plaster
226
155
35190.46
Page No. - 104/13 a (ii ) (3rd Corrigenda, dt- 04.06.2018 ) (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25%
for each addl. floor above 4th floor)
(ii) Grill weighing above 16 Kg./sq.mtr and above
2
9696
19392
Page No. - 107/20 (b) (3rd Corrigenda, dt- 04.06.2018 ) Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction
projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20
mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
(Add extra @ 1.2 % for each additional floors upto 4th floor and @ 1.5% for each addl. Floor above 4th floor.)
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
Without integrated grills.
(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. (The extra rate admissible for the openable portion only)
1
2199
2199
Page No. - 106/18 a (ii ) (3rd Corrigenda,dt - 04.06.2018)
Collapsible gate with 40 mm x 40 mm x 6 mm Tee as top and bottom guide rail, 20 mm x 10 mm m vertical channels 100 mm apart in fully stretched position 20 mm x 5 mm M.S flats as collapsible bracings properly rivetted and washered including 38 mm steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (In ground floor)
(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor)
6
4330
25980
Page No. - 106/19
(a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I.
Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling
shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.
(i) Measurement ......... upto 2 decimal (ii) payment of painting to be separately
7
3270
22890
Page No. - 233/1
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished
conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).
(A) In 10-12 Micron thickness Annodizing film
I) Natural white
k) Movable door shutter.
i) Door frame. (Top & sides)
10.9
315
3433.5
ii) Shutter : Top rail
2.5
304
760
Bottom rail
2.5
448
1120
Lock rail
2.5
377
942.5
Door vertical
8.4
332
2788.8
Glazing cleap
37
50
1850
Page No. - 242/5 Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge
(b) 250 mm long
2
67
134
Page No. - 242/6 Supplying PVC rollers for sliding windows as per direction of Engineer in charge.
2
14
28
Page No. - 242/7 Supplying maruti lock (100mm)
2
46
92
Page No. - 243/9 Supplying bubble free float glass of approved make and brand
conforming to IS: 2835-1987.
iv) 5mm thick coloured / tinted / smoke glass
6
585
3510
Page No. - 244/ 13
(A) Supplying Aluminium casted body hydraulic door closer as per I.S.I.
2
635
1270
Page No. - 244/ 13
(B) Supplying 125 mm. Dia acrylic handle for aluminium door as per
approved make & brand.
(a) Natural Colour
4
181
724
Page No. - 244/ 13
(D) Supplying Aluminium casted body Butt Hinge (KOBRA type).
(Natural white)
6
56
336
Page No. - 244/ 13
(F) Supplying Zinc powered coated star lock (Natural White)
2
40
80
Page No. - 239/2 Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
(B) Fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge
6
1281
7686
Page No. 99/1 (i) (3rd Corrigenda, dt- 04.06.2018 ) M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with
bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to
IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,
consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. III) For built up sections / srtuctural members of specified sections
weighing not less than 22.5 Kg./m
0.9
75266
67739.4
I) For structural members of specified sections weighing less than 22.5 Kg./m
1.7
72603
123425.1
Page No. - 250/27 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)
(b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)
5
2878
14390
Page No. - 117/8
Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x
20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.
15
279
4185
Page No. - 134/27
PVC Door Shutter-30 mm thick:
Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong
enough to with stand wear and tear. The rate is inclusive of cost of all materials,
labour, and hire of tools and plants and appliancesi/c carriage of all materials
taxes and all other incidental charges complete.
5
2127
10635
Page No. - 198/5 Rendering the Surface of walls and ceiling with White Cement base
WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
146
122
17812
Page No. - 195/7 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing
the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In ground floor) (b) Two Coat
i) Water based interior grade Acrylic Primer
146
44
6453.2
Page No. - 201/4 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (Two coats) ii) Standard Quality
146
62
9052
Page No. - 196/8 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior
emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC (In ground floor)
(b) Two Coats
66
45
2976.6
Page No. - 197/17 (c) Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The
rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (In ground floor)
(Two Coat)
a) Normal Acrylic Emulsion
66
67
4422
Page No. - 200/1 (a) (a) Priming one coat on steel or other metal surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sand
papering etc.
102
29
2958
Page No. - 200/2 (A) Painting with best quality synthetic enamel paint of approved make
and brand including smoothening surface by sand papering etc. including
using of approved putty etc. on the surface, if necessary :
(b) On steel or other metal surface :
With super gloss (hi-gloss) -
(iv) Two coats (with any shade except white)
102
79
8058
Page No. - 66/36 1 (A ) (3rd Corrigenda,dt - 04.06.2018)
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I
(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.
(A) Deep Colour & White
5
1678
8390.9
Page No. - 64/ 35 ( A ) a (i) (3rd Corrigenda,dt - 04.06.2018)
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative Ground Floor
87
736
64038.09
Page No. - 165/17 M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing
compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc.
complete)
In ground floor
83
1159
96197
Page No. - 12/19 (I) a
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(a) For Exposed Work
PVC Pipes
(Dia)
15 mm
6
101
606
20 mm
10
129
1290
25 mm
10
177
1770
Page No. - 5/5 (vii) Supplying, fitting and fixing gunmetal wheel valve of approved brand and
make tested to 21 kg per sq. cm. (for water lines only).
(vii) 25 mm dia
2
778
1556
Page No. - 6 / 7 a / (i) Supplying, fitting and fixing bib cock or stop cock
(ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
7
539
3773
Page No. - 36/2 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
3
1015
3045
Page No. - 79/3 P-41, It-2(ii) Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
(ii) 550 mm X 400 mm size
2
2208
4416
Page No. - 79/3 Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.
(a) With 'P' trap (with vent)
3
3104
9312
Page No. - 80/7 Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).
(i) 450 mm X 350 mm
1
881
881
Page No. - 82 / 17
Supplying, fitting and fixing liquid soap container.
(b) PTMT(Prayag or equivalent)
4
210
840
Page No. - 65/14 (iii ) Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) 'P' Trap
(iii) 100 mm
3
948
2844
Page No. - 82/22 (a) (ii) Supplying, fitting and fixing towel rail with two brackets.
(a) C.P. over brass
(ii) 25 mm dia. and 600 mm long
3
430
1290
Page No. - 43/9 ( i ) Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
(i) 300 mm long
3
57
171
Page No. - 43/10 ( iii ) Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,
with PVC coupling at one end fitted with necessary clamps.
(iii) 900 mm long
2
75
150
Page No. - 68/23 A (i) Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(A) (i) Single Socketed 3 Meter Length
(b) 110 mm
5
292
1460
Page No. - 70/23 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(B) Fittings
(iii) Door Tee
(b) 110 mm
2
195
390
Page No. - 70/23 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(B) Fittings
xi) Door Bend (T.S.)
(b) 110 mm
2
147
294
Page No. - 88/3(i) A 7th Corrigenda & Addenda
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing
and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,PartI.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
(i) For 10 users
ii) With Pakur variety. (Other manufactured not specified)
1
33777
33777.77
GST Item (Effect from 01.11.2017)
18 % GST on Estimated Cost of Sl No- 1 to 61
1
139971
139971.18
Labour Welfare Cess Item (Effect from 01.11.2017) 1% Labour Welfare Cess on Estmated Cost of Sl No -1 to 62
1
9175
9175.89
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%