Municipal Affairs Department Tender

80mm dia

25 mm dia

(C) Elbow 25 mm Dia

(E)Tee-25 mm Dia

(I) Union-25 mm Dia

F) (i) Nipple (75 mm long)-25 mm Dia

(L) Reducing Socket (mm x mm)-32x25

Page No.-52,Item No.-5(i.) Supplying High Density Polythene strainer of approved make with adopter conforming to I.S. specifications (iii) 80mm dia

LMR Supplying, fitting and fixing MS Clamp as necessary to hold the pipes into GL.

LMR Supplying, fitting and fixing Ball Valve as necessary .

Page No.-105, Item No.-5(vii) Supply of G.I. reducing sockets with ISI mark (vii) 80 mm

LMR Supplying, fitting and fixing GI Wall Cap . Top of pipe

Market Rate. Supplying 3 core, 2.5 sqmm multicore Havells Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors PVC isulated and FR PVC Round Sheathed, copper conductor (Flexible) industrial cable, 1100 Volt, conforming to IS694. (Basic Code: WHPNDSKG32X5)

Market Rate Submersible Pump : KS3-75MM Borewell Submersible Pump- 1PH.(Water Filled) : KS3D-1015 1P WITH CP CODE : D11220100480 1H.P./0.75KW. Submersible Pump

Page No.-06, Item No.-07. Supplying, fitting and fixing bib cock or stop cock. (f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent) 15 mm

Page No.-37, Item No.-6(b.). Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity

Page No.-37, Item No.-10. Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L.

Page No.-55, Item No.-20. Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangments for testing the yield in gallonsper hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.. washing for 1 Day Each

Page No.-56, Item No.-24. Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engfineer-in-charge including cost of all materials labour and equipment complete. 1.5 Cum. Each

Page No.-104, Item No.- 13(i) M.S. or W.I. ornamental gril or approved design joints continuously welded with M.S or W.I flates and bars for windows, railing etc fitted and fixed with necessary screws and hungs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. Under Storage Tank+Shed

Building works, Page No.-99, Item No.-01. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m Structure with Square Pipe Section 50x50x3.2 mm

Structure with Equal Angle Section 32x32x3.2 mm

Page No.-200, Item No.- 1 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Page No.-200, Item No.- 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Construction of masonry barricate made 1st class brick and 1: 4 cement mortar over RCC slab made with RCC (1:1.5:3) and punning the structutres after plastering if on the above Ground lebvel for submersible pump as per decision and direction of E-i-C.

[Ref. UD & MA Electrical-Mechanical Works (Volume-1), Page No - 11/ Item(c)/1] Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/) 10 sqmm 2 core

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm

Page No.-24, Item No.- 4 Ordinary cement concrete (mix 1:2:4)) M-15 with grade stone chips (20mm down excluding shuttering and reinforcement. If any in ground floor as per relevent IS Codes. (i) Pakur Variety

ADD 18 % GST

ADD 1% CESS