Municipal Affairs Department Tender

Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction a) Single brick flat soling (thickness 75 mm.)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor i) Without staging 25mm to 30 mm shuttering works.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety foundation

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel SHYAM,SRMB,JSW,JSPL,BMASL,ELECTRO STEEL,SSL

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing &direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. a) Span up to 12 Mtr

Providing and fixing exterior quality Aluminium Composite Panel (ACP wall cladding onexisting Al./MS frame work with GI brackets ,ACP fixed on the existing frame work by folding theedges of ACP panel (Engravin therear surface of ACP sheet)with CP angles ,cleats and strainless Steel screws forming groves atthe periphery of ACP panel. Such grooves filled with foamand silicon sealant etc. complete with all materials (but including thecost of siliconsealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)

Supplying and laying true to lineand level vitrified tiles of approved brand (sizenot less than 600mmX600mmX10 mm thick) in floor, skirting etc. set in20mm sand cement mortar (1:4)and 2mm thick cement slurry back side of tiles using cement@2.91Kg./sq Morusing polymerised adhesive (6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurryusing1.75Kgof cement per sqMbelow mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved makeas directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles usings oftand dry clothupto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement,synthetic adhesive and grout material to be supplied by the contrr]e) (I) Withapplicationslurry@1.75kg/ Sq.m, 20mmsand cementmortar(1:4)&2mmthickcement slurryatbackside of tiles, 0.2 kg/ Sq.mwhite cement for joint filling with pigment. (B) Light Colour

Supplying best Indian sheet glass panes set in putty and fitted and fixed withnailsandputtycomplete. (Inall floorsforinternalwall&upto6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m)

Supplying profiles of required section made of Aluminium Alloy Extrusion sconforming to IS:732-1983andIS:1285-1975;Annodized (with required film thickness and specified colour/ natural) matt finished conformingtoIS:1868-1983 for fabrication of composit door, sliding& casement windows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer-In Charge. (Payment will be made on finished length of the work). g) Fixed glazing. i) Top, bottom and side member.

ii) Mullion.

iii) Glazing clip.

Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure, ground floor

125mm. thickbrickworkwith1st class bricks incementmortar (1:4) in ground floor.

Plaster(towall, floor, ceilingetc. with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:6 cement mortar (a) 20 mm thick plaster

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work&4 nos. of key stones (10mm) fixed with aralditeat the backof each tile& finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including rougheningof concrete surface, if necessaryorby synthetic adhesive & grout materials etc. WithSandCementMortar (1:3) 15mmthick&2mmthick cement slurry at back side of tiles using cement@2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative

GST Item 18 % GST on Estimated Cost of Sl. No.-1 to 18.

Labour Welfare Cess Item 1 % Labour Welfare Cess on Estimated Cost of Sl. No.-1 to 19.