Municipal Affairs Department Tender

(A) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. PWD(WB), S.O.R. Volume - I : , Item No.-1, Page No. - 200

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : (ii) Two coats (white in shade) PWD(WB), S.O.R. Volume - I : Item No.-2, Page No. - 200

(B) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. PWD(WB), S.O.R. Volume - I :Item No.-1, Page No. - 200

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface :With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) PWD(WB), S.O.R. Volume - I : Item No.-2, Page No. - 201

Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original. PWD(WB), S.O.R. Volume - I : Item No.-3, Page No. - 203

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to recei (b) Two Coats Page- 196Item- 8

Protective and Decorative Acrylic exterior emulsion paint of approvedquality, as per manufacturer's specification and as per direction ofEngineer-in-Charge to be applied over acrylic primer as required. Therate includes cost of material, labour, scaffolding and all incidentalcharges but excluding the cost of primer. c) Super Protective 100% Acrylic Emulsion a) Normal Acrylic Emulsion Page- 196Item- 10

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) (A) Deep Colour & White Page-66 Item-36PWD SOR Vol-IPWD SOR Vol-I w. e. f. 1.12.2017

Add 18 % GST

Add 1 % CESS