Municipal Affairs Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Municipal Affairs Department - MAD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Nov 2024
Closing Date16 Dec 2024
Tender Amount₹ 3,26,60,951
Costs
EMD
₹ 6,53,219Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Wbmad/bm/swm/8/24-25/sl1 2nd Call
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MAD_771355_1Tender No
WBMAD/BM/SWM/8/24-25 2nd CallTender Authority
Municipal Affairs Department ViewPurchaser Address
-Website
http://http://www.wburbanservices.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge
26
166
-
(b) Extra for Staging beyond 4 m [mode of measurement: Area of unsupported horizontal projection (where staging beyond 4 m is practically unavoidable) x mean height of staging] above initial 4 m.
1654
149
-
Brick work with 1st class bricks in cement mortar (1:4).(b) In superstructure, ground floor
12
5304
-
125 mm. thick brick work with 1st class bricks in cement, mortar (1:4) including H.B. netting in every third layers.Ground Floor
164
705
-
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety
2.32
5122
-
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).Steel Shuttering or 9- 12 mm thick approved qualiy Ply board shuttering in any concrete work.a) Ground Floor
24
363
-
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge-black annealed wire at every intersection, complete as per drawing and direction.II.JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL.a) Ground Floor
0.22
54375
-
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.a) Pakur Variety
2.45
4610
-
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface].(ii) With 1:4 cement mortar.(a) 15 mm thick plaster.(Exterior).Ground Floor.
138
152
-
First Floor
93
156
-
Second Floor
93
160
-
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface].(ii) With 1:4 cement mortar(b) 15 mm thick plaster,(interior).Ground Floor
263
152
-
(c) 10 mm thick plaster
69
123
-
Making V-groove line ( 6 mm. wide, 6 mm. deep) in plastered surface.
1.75
493
-
Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface.
5.04
580
-
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.I) For structural members of specified sections weighing less than
0.27
72603
-
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Nonmodular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer)
61
1472
-
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous
& Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick
layer applied directly over finished .artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouringpigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete includingthe cost of materials, labour and all other incidental charges complete true to themanufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength 1500 N
30
1589
-
Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge.
109
1060
-
Weather board 12mm. Thick fitted and fixed with screws complete.(b) Ordinary Teak Wood.
298
1794
-
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
252
1004
-
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone.
309.54
224
-
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency].(b) With Chawk Dungri.(iii) Area of each tile exceeding 0.6 sq.m but not excedding 1 sq.m.
110
2707
-
Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. [Using cement slurry at back side of tiles@ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]. Area of each slab upto 0.2 Sq.m
80
1747
-
d) Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes at a downward angle of about 45 degree at the junction of woodwork and masonry and squirting chemical emulsion into these holes at the rate of half litre per hole. The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. The shutters are to be sprayed with emulsion. on both sides. All wooden fixtures like almirahs, racks etc. are also to be throughly sprayed with chemical emulsion. (Payment will be made on the basis of outside measurements of doors and windows
1250
61
-
(c) Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm.
interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)-1981.
140
93
-
(b) Anti-termite treatment to the outside of foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight, drilling 12mm. dia holes in concrete or masonry apron at an interval of 300mm. to a depth, of 300mm or more as close to the plinth wall as possible and the chemical emulsion pumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981.
100
83
-
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete. Iron Butt Hinges and M.S clamps. {The quantum should be correted upto three decimals). Sal: Maloyasian
4.63
75572
-
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.(a) 35 mm thick shutters (single leaf)
23
2659
-
Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 asper approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges
thereof. In ground floor.Glossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1.5mm
46
802
-
Fixed louver shutters of doors and windows as per design, including fitting & fixing same in position but excluding the cost of hinges and other fittings in ground floor.(ii) 40mm thick shutters with 12mm thick valve.(a) Ordinary Teak Wood.
4.78
4894
-
Supplying & fitting of 65mm thick asbestos free - fire, heat and smoke resistant composite Accoustic Door Shutter complying with fire performanceFD120 as per IS:3614 (part -II)-comprising of 2x 8 mm Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in pressure impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood,densified to 810kg/cum ) frame work of 100 mm x32 mm with 32mm thick infill of ceramic fiber (density 128Kgs/cum), vermaculite mix faced with 6 mm Fire retardant High Density fire board, internally lipped with hardwood beading, and pasted in Hydraulic Press under 25 MPa, spray coated with 2 coats of in-tumescent paint of minimum 200 micron, and with 1 row of Brush- Type intumescent strip of size 10mmx 4mm affixed on peripheral slit on all edges of shutter except bottom for fire and smoke sealing and placement of 3 mm thick rubber membrane, at the inside face, sandwiched between calcium silicate board & high density fire.retardant board , without any external lipping including fitting ,fixing shutters in
position but excluding the cost of hinges & other fittings as per direction of Engineer -in -charge complete in all respect in Ground Floor. [Note : Specific permission of the Superintending Engineer is required for execution of this item.].( 4mm thick approved quality veneer With gala natural polish) .Taken from DPR Nazrul Mancha at Rabindra Sarabar.VATTED BY Chief Engineer E & M Sector KMDA,slno 65 pageno 24,
14.4
15000
-
(a) M.S. or W.I. Ornamental grill of approved design joints continuously welded with M.S W.I. Flats and bars of windows, railing etc fitted and fixed with necessary screws and lugs. ii) Grill weighing above 16 kg./sqm. a) Ground Floor
4.8
9696
-
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(l:2:4) as per direction. (Cost of concrete will be paid separately).40mm X 6mm, 250mm Length
90
29
-
Oxidised iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.100mm. X 58mm. X 1.90mm.
80
61
-
Anodised aluminium barrel /tower/ socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(x) 300mm long x 12mm dia. bolt.
15
151
-
Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.300mm x 16mm dia. bolt.
15
231
-
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: 150 mm grip x 12 mm dia rod.
16
111
-
Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality of reputed brand as per direction of Eingineer-in-Charge fitted and fixed complete including all incidental charges.
20
1571
-
Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.
10
1954
-
Godrej Hydraulic door closer fitted and fixed complete.(a) Heavy type
13
2064
-
Aluminium Louvered windows.(B) In 15 Micron coloured Annodizing
1.44
7913
-
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; 4mm thick coloured / tinted / smoke glass.
1.58
468
-
Wall Paneling Specification (Upper Reaches).Stretch NRC fabric 1.7mx75m.Supply and installation of Stretch NRC system consisting of FR Grade NRC fabric with high-performance integrated core and acoustically-transparent face covering of choice colour, size 1.7mx75m, stretched by using combination of Anutone Strut CC22 Cross Channel and Anutone Strut FS15 Tracks, Strand, 10mm wooden base, Anutone SynthPF 5x10 infill with requisite accessories.The Strut system includes Strut CC22 Cross Channel, fully knurled, sectional thickness 0.55mm, length 3600mm, web 40, depth 22mm and equal flanges of 15mm is fastened to the wall @ 600mm centers. Wooden base 10mm is then installed on the CC22 along the marking lines with metal fasteners at 300mm centers. FS15 tracks to be installed on wooden base, by first applying Stick S7 adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Strut Tracks.. Strand square edge magnesite bonded pinewood fiber panels of size 600x1200x15mm having density 400kg/m3, weight 6kg which is fixed to Strut CC22 Cross Channel inbetween tracks. Long edge of panels should be perpendicular to length of Strut CC22 Cross Channel. SynthPF 5x10mm adhered on Strand by using Stick 7 adhesive.The Stretch NRC acoustical fabric of width 1.7m is stretched and tucked into the Anutone Strut Tracks and secured to the locking jaws with purpose-specific tucking tools to obtain smooth, taut, wrinkle-free finish. Ensure the weft and weave of the fabric along with the surface are all oriented in one direction to achieve uniform shade. Note: Minimum 100mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600mm.Technical Parameters of fabric.• Fire (Class) – 1
• Acoustics – na
• Thermal conductivity (W/mk)– NA
• Climate (°C, RH) – 50, 90
• Light reflectance (%) – Colour Dependant
• Green (VoC, RC %) – Low, 25 Technical Parameters of Strand.• Fire (Class) – 1 & P
• Acoustics – NRC 0.97 (For 40mm C50 Mounting)
• Thermal conductivity (W/mk)– 0.07
• Climate (°C, RH) – 50, 95
• Light reflectance (%) – 80
• Green (VoC, RC %) – Low, 30 Make : Anutone, Armstrong.
360
7486
-
Stage Ceiling Specification.Anutone Subtex Ebony 595x595x20mm, Square edge (T15 Ebony Grid system).Supply and Installation of Subtex Ebony,square edge, Glassfibre core fully encapsulated ceiling tile of size 595x595x15mm having volume density 120Kgs/m3, weight 1.8kg/m2 which is suspended by using 0.3mm thick Skelet TrelisT15 Ebony metal grid system.Skelet TrelisT15 Ebony metal grid system of 600x600mm module includes Anutone Skelet WA15B30 wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Skelet MT15B36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15B12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally Skelet CT15B06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15B12 CrossT in direction parallel to the .Main T15 to result in 600x600mm module. Subtex Ebony square edge of size 595x595x15/20mm shall be placed into the grid size of 600x600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade.Technical Parameters .• Fire (Class) – 1 & P
• Acoustics – NRC 0.9 (For E900 Mounting)
• Thermal conductivity (W/mk)– 0.066
• Climate (°C, RH) – 40, 95
• Light reflectance (%) – na
• Green (VoC, RC %) – Low, 35 Make: Anutone, Armstrong.
224
2970
-
Stage Wall paneling Specification.Anutone Strand Ebony 600 x 2400 x 20 mm, Kerfed edge.Supply and Installation of Anutone Strand Ebony, Kerfed edge Magnesite bonded pinewood fibre core tiles of size 600x2400x20mm, density 400 kgs/m3, weight 8 kg/m2 installed by using Anutone Strut framework system with non-visible fasteners using Anutone Strut H-Spline.Supply and Installation of Anutone Strand Ebony, Kerfed edge Magnesite bonded pinewood fibre core tiles of size 600x2400x20mm, density 400 kgs/m3, weight 8 kg/m2 installed by using Anutone Strut framework system with non-visible fasteners using Anutone Strut H-Spline.The Strut framework systems includes Anutone Strut CC22 Cross Channel having thickness 0.7mm, length 3600mm, knurled web 40, depth 22mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. Strand Ebony to be installed on CC22 frame work with the help fastners. The Strut framework systems includes Anutone Strut CC22 Cross Channel having thickness 0.7mm, length 3600mm, knurled web 40, depth 22mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. Strand Ebony to be installed on CC22 frame work with the help fastners.Optional: The system is backlined with the acoustical infill Anutone Synth PF 5x25mm thick. Technical Parameters.• Fire (Class) – 1 & P
• Acoustics – NRC 0.87 (For 15mm thk C50 Mounting)
• Thermal conductivity (W/mk)– 0.08
• Climate (°C, RH) – 50, 90
• Light reflectance (%) – Low light reflectivity
• Green (VOC, RC %) – Low, 30 .Make: Anutone, Armstrong.
235
4914
-
Allied Finishing work Specification.Supplying & fitting in all places of wall panelling (With approved quality veneer ) to all heights & fixing on wooden frame work grid including 12mm thick B.W.R ply conforming to IS 303-1989 bonded with phenol fomal dehyde synthetic resin with veniar top 4mm thick of approved make & quality & polish with all fittings & fixtures as per drawing & direction of EIC.
111
5500
-
Carpet Flooring Specification.Supplying & laying CARPET of approved make & quality as per direction of E.I.C. (Analysis for 1 sqm.).(Make: Donair, Divine, Interface) .
223
1750
-
New Chair Specification.Supply, fitting and fixing of:
The chairs are to be fixed in rows as per site conditions and numbered suitably. Auditorium Chairs with Push Back Mechanism (Synchro Slide push back with combined movement of Seat & back rest simultaneously). Mechanism should be smooth & noise free. The Tension spring used in the mechanism shall be of proper size and duty, and made from anti-rust quality spring steel.Supply, fitting and fixing of:
The chairs are to be fixed in rows as per site conditions and numbered suitably. Auditorium Chairs with Push Back Mechanism (Synchro Slide push back with combined movement of Seat & back rest simultaneously). Mechanism should be smooth & noise free. The Tension spring used in the mechanism shall be of proper size and duty, and made from anti-rust quality spring steel.Chair Metal Structure Frame to be erected with 16G back rest and seat, would be made of SHS of minimum size 50mm25mm coated.Chair back rest and seat, would be made of CFC Free PU HIGH Density Foam 100mm thickness (40kg/m3), and covered with PU Laminated Fire Retardant Fabric (Responsible Brand and evaluation) of approved make , quality, shade and texture.The Arm-rest to be made of Teak Wood of minimum 75mm wide and 25mm thick as per design. The wooded surface shall be properly finished and French polished. The center-to-center distance between two chair is only indicative . To achive better comfort the same may be slightly altered as per the site conditionson approval of EIC. Chairs dimension:a) Height of Backrest 81mm thick(50mm foam) x 600mm height x 450mm width; to be fixed to achieve heiht from the finished floor level- (925mm ±10mm). All completed as per approved drawing and design of EIC.(Make: C V G, Wipro, Godrej)
312
9000
-
Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]
In Ground Floor.(ii) 6mm
31
1122
-
French polishing to wood work including preparing surface (ordinary gloss).(b) On old French polished surface including complete removal of the old polish.
60
538
-
Polyurethane Polishing to woodwork with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete as per direction of Engineer-in- Charge.
159
837
-
(a) With 1st class Best Indian teak.
336
267
-
M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including
G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm
respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing
compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor
163
1159
-
Supplying fitting & fixing in position 16 mm thick Cement Bonded Particle Board confirming to IS:14276-1995 made out of 62% Cement, 28% Wood & 10% chemicals having density not less than 1250 Kg/cum, Bonding Strength 9 N/Sq.mm, Tolerance in thickness ±1 mm, Swelling in thickness ≤ 1% for 24 hrsimmersion, with fire resistant & weather resistant properties including supplying10 mm dia 75 mm long bolts with nuts & washer fitted after every 475 mm apart for holding the panels with supporting structure complete excluding cost of supporting structure as per direction of Engineer in charge.
48
1013
-
Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)
853
110
-
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor).(b) Two Coats.i) Water based interior grade Acrylic Primer.Ground Floor
657
44
-
First Floor
196
44
-
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer): (Two coats).(ii) Luxury Quality.Ground Floor
657
70
-
First Floor
196
70
-
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat.Ground Floor
1113
31
-
Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of specia Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification anc as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost ol primer.Two Coat.a)On new cement plaster surface.Ground Floor
1113
101
-
Restoration and preservation of old portaits (oil painting) (2feetx3feet)
35
25000
-
(b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4cementitious material) or as per manufacturer's specification for water
proofing layer in water tank etc. (No Departmental Cement is required)
767
257
-
Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth, clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials, labour and applicable taxes. (Payment shall be made on the basis of finished surface area.). Membrane Property: Softening Point 150 deg C, Cold Flexibility -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse)
767
407
-
Supply, fitting, fixing and installation of Toilet cubicles (SS) of width and depth as per specifications/Site drawings. Cubicle height will be 1980mm when top rail of rectangular cross section is used and 2039mm when top rail of circular cross section is used. It is Made of 12mm thick solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure 5MPa and temperature 1200C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of Alpha cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge including all necessary accessories made of steel like hinges, screws, door stopper, wall plugs etc. & rubber padding as per drawing and direction of engineering in charge.Toilet Cubicles: Std Sizes (W x D X H): 900mm x 1550mm x 1980mm/2039mm (Height is including 150mm gap from bottom) Door width- 600mm, thickness- 18mm
2
40984
-
Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5.(c) 60 mm thick interlocking designer concrete paver block M- 35 grade for light-traffic zone,commercial & office complex, tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.)(ii) Coloured Decorative
75.32
1047
-
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. at all floor.
30
29
-
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. pin the surface, if necessary in all floors.(b) On steel or other metal surface:With super gloss (hi-gloss) -[iv) Two coats (with any shade except white)
30
79
-
DRESSING UNIT WITH DRAWER UNIT FOR GREEN ROOM Supplying fitting, fixing and and positioning Dressing Unit for Green Room of auditorium of size 800 (L) X 600 (B)X 900 (H),The dresser unit is made of 19mm thick Bwr grade plywood conforming IS 710-1977 chemically treated for termite and borer resistant bonded with melamine fortified urea formaldehyde synthetic adhesive/ phenol formaldehyde synthetic resin of 19mm thickness with an approved quality of 4mm thick veneer with polyurethane polish (glossy type) & 1mm thick white balancing lamination on the interior surface.Complete manufacturing process should be of 100% machine made.The dressor unit shall have one drawer unit of size 400(L) X 200(H) below the drawer with mirror- 600mm (L)X750(H) mm (H)centrally placed leaving 100mm from all four sides and fixed by studs . Lighting Arrangement is done on 3 sides of the mirror.The handls/knobs should be SS conferming to the system of 304 grade of International standerd/ Hattiche made or equivalent; all fitting are made of Hattich/Hofley or equivalent ; as per Architect's Drawing & direction of EIC.Taken from DPR Nazrul Mancha at Rabindra Sarabar.VATTED BY Chief Engineer E & M Sector KMDA, sl no 1 page no28.
6
10000
-
WARDROBE FOR GREEN ROOMSupplying fitting, fixing and and positioning Wardrobe for Green Room of auditorium, of size 2.56(L) X 0.60(B) X 2.1 (H). All ply will be fixed by toungue join;The wardrobe is made of 19mm thick Bwr grade plywood conforming IS 710-1977 chemically treated for termite and borer resistant bonded with melamine fortified urea formaldehyde synthetic adhesive/ phenol formaldehyde synthetic resin of 19mm thickness withcovered with approved quality veneer chemically treated for termite and borer resistent bonded with melamine fortified urea formaldehyde synthetic adhesive/phenol formaldehyde synthetic resin. All ply (19mm and 12mm thick conforming IS 710-1977) will be fixed by toungue join; Approved quality 4mm thick veneer with polyurethane polish (glossy type) . White balancing laminate 1mm thick on the inner surface and back surface .Complete manufacturing process should be of 100% machine made.The handls/knobs should be SS conferming to the system of 304 grade of International standerd/ Hattiche made or equivalent; as per Architect's Drawing & direction of EIC.Taken from DPR Nazrul Mancha at Rabindra Sarabar.VATTED BY Chief Engineer E & M Sector KMDA,sl no 2 (I) page no 29
2
78750
-
CHAIR FOR GREEN ROOM Supplying fitting, fixing and and positioning Chair For Green Room, size 450mm X 450mm made of stainless steel with arm rest provided. openable high back and can lean to complete backwards. The pedestal of the chair made of Stainless steel confirming to IS: 304, is 45mm dia, of height 1200mm which is adjustable. Cusion would be made of CFC Free PU HIGH DENSITY FOAM 100mm thick (48kg/m3) and covered with Artificial leather of Response/ equivalent quality.as per architect design/as directed by E.I.C.Taken from DPR Nazrul Mancha at Rabindra Sarabar.VATTED BY Chief Engineer E & M Sector KMDA,sl no 3 page no 29
6
15000
-
SOFA FOR VIP ROOM ,GREEN ROOM & LOBBYSofa 3 seater: Fully upholstered sofa 3 seater, made of treated hard wood; upholstered in 40 Density polyurethane foam 150MM thick and siliconised polyfill etc. Size of three seater 2440mm(L) x 990mm(D) x 450(SH). Legs made of hard solid wood covered with foam and synthetic leather. Upholstered in synthetic leather of your choice @400.00 per meter.;machine finished under as per Architect's Drawing & direction of EIC.
6
30000
-
Sofa 2 seater: Fully upholstered sofa 2 seater, made of treated hard wood; upholstered in 40 Density polyurethane foam 150mm thick and siliconised polyfill etc. Size of two seater 1220(L) x840(D) x 430(SH). Legs made of hardsolid wood covered with foam and synthetic leather. Upholstered in synthetic leather of your choice @400.00 per meter.;machine finished under as per Architect's Drawing & direction of EIC.Taken from DPR Nazrul Mancha at Rabindra Sarabar.VATTED BY Chief Engineer E & M Sector KMDA,sl no 4 page30
2
25000
-
CENTER TABLE Supplying fitting, fixing and and positioning Center Table of 750mm (L) x 400mm (W) x 450mm (H) four legged supported by 40mm x 40mm of Teak wood covered with approved quality veneer chemically treated for termite and borer resistent bonded with melamine fortified urea formaldehyde synthetic adhesive/phenol formaldehyde synthetic resin. All fitting are made of Hattich/Hofley or equivalent . All ply (19mm & 12mm thick conforming IS 710-1977) will be fixed by toungue join.
4
20000
-
CENTER TABLE Supplying fitting, fixing and and positioning Cornerr Table of 600mm (L) x 600mm (W) x 450mm (H) four legged supported by 40mm x 40mm of Teak wood covered with approved quality veneer chemically treated for termite and borer resistent bonded with melamine fortified urea formaldehyde synthetic adhesive/phenol formaldehyde synthetic resin. All fitting are made of Hattich/Hofley or equivalent . All ply (19mm & 12mm thick conforming IS 710-1977) will be fixed by toungue join.Taken from DPR Nazrul Mancha at Rabindra Sarabar.VATTED BY Chief Engineer E & M Sector KMDA,sl no 5 page no 30
7
5000
-
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including
all specials. No separate payment will be made for accesories, specials.(A) For exposed work.(i) CPVC Pipes Class-1, SDR-11 b) 20 mm. dia
15
143
-
c) 25 mm. dia
25
208
-
(B) For concealed worka) 15 mm. dia
15
140
-
(B) For concealed workb) 20 mm. dia
20
171
-
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary
accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple,longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as
required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(B) For Concealed Work.(a) 15 mm dia. medium quality.
5
238
-
(b) 20 mm dia. medium quality
5
266
-
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipplelongscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories,
specials.)a) 32 mm. dia
15
250
-
Suppling, fitting and fixing Wall mounted water closet of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (Equivalent to Code No. 20061 or 92065 & Model Studio or Rubbic of Hindware or equivalent.) (This item to be executed on specific permission of Superintending Engineer)
6
3988
-
Closet seat of approved make with lid & C.p. hinges, rubber buffer and brass screws supplied, fitted and fixed complete. i) Bestolite ( solid type ) White
6
715
-
Supplying, fitting and fixing concealed cistern of approved make with flash
plate Cute/Loop/Shell/Nova (Code No. concealo-H(80mm Body sap code
508179 of Hindware or equivalent).
Matt/Gloss
6
7440
-
Supplying fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary. i) Box type size 175mm. X 150mm.
6
338
-
Supplying, fitting and fixing liquid soap container.(a) Cromium plated.
6
393
-
Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass.(ii) 25 mm dia. and 600 mm long
6
430
-
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(iii) 630 mm X 450 mm size
7
3260
-
Supplying, fitting and fixing Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
7
629
-
Supplying fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fiber glass frame of any colour, frame size 550mmX400mm.
9
613
-
H.C.I. bell mouth plain trap supplied, fitted and fixed with lead jointing complete 100 mm dia and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid separately).
7
845
-
Supplying, fitting and fixing Aluminium domical grating. i) 125 mm
6
56
-
Supplying, fitting and fixing Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand).
7
861
-
(ii)Supplying, fitting and fixing Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand).
21
953
-
Supplying, fitting and fixing pillar cock of approved make.c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of
JAQUAR or equivalent).
8
857
-
Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application.(i) 150mm internal dia.
95
420
-
(ii) 200mm internal dia.
25
604
-
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.).PVC Pipes.(Dia).100 mm.
65
1162
-
Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S.painting two coats to the exposed surface with approved paint complete (payment of painting will however be paid seperately ).b) 100 mm. Dia
4
367
-
Supplying, fitting and fixing peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg. sqcm.) (Note; item (i), (ii) and (III) to be done as per speciffic diirection of the Superintending,Engineer)32 mm.
4
1258
-
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only) a) 32 mm.
6
1622
-
Supplying, fitting and fixing approved brand P.V.C. Connector white flexible with both end coupling with heavy brass over C.P. nut 15 mm. dia.a) 750 mm. Long
14
117
-
Supplying, fitting and fixing approved brand 32mm P.V.C. waste pipe with coupling at one end fitted with neessory clamps.a) 750 mm. Long
14
59
-
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(ii) 470 mm X 280 mm X 340 mm
4
945
-
Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished.
2
1426
-
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.i) With Pakur variety.(JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL).
mm depth.
19
6679
-
iii)Extra for each additional depth of 150 mm or part thereof beyond initial 600
mm depth.
15
1092
-
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.(iv) For 50 users.A) With Pakur variety. (JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL)
1
84905
-
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L.and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL)
1
15329
-
MCB ENCLOSER BOX DB BOX FIXTURES Supply & Laying of 35 sqmm X 3.5 C XLPE Insulated Armoured Cable. (Only for EB to Main L.T Panel)
30
516
-
Supply & Laying of 16 sqmm X 4 C XLPE Insulated 'AL' Armoured Cable. (Main L.T Panel to TPN DB's)
10
408
-
Supply & Laying of 10 sqmm X 4 C XLPE Insulated 'CU' Armoured Cable. (Main L.T Panel to Control Panel of Stage Light)
10
999
-
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cable. (W.B PWD SOR 2017 Page No. F-4). (3% distric charge added on PWD SOR 2017 rate).For 3.5 C upto 35 sqmm (Item No.7.d)
2
166
-
For 4 C upto 16 sqmm (Item No.7.c)
4
135
-
For 4 C upto 10 sqmm (Item No.7.c)
4
135
-
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : (W.B PWD SOR 2017 Page No. F-5). (3% distric charge added on PWD SOR 2017 rate).3½ core 35 sqmm cable (Item no. 8.b.xv).
2
162
-
4 core 16 sqmm (Item no. 8.b xii).
4
97
-
4 core 10 sqmm (Item no. 8.b xi).
4
69
-
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (W.B PWD SOR 2017 Page No. D-10, Item No.14). (PWD SOR RS 2851 + 3% distric charge added).4 Way (Legrand Make)
2
2936
-
Supplying and fixing 240/415 V MCB of Breaking
capacity 10 kA & C characteristics on din rail of
existing DBs and necessary connection (W.B PWD SOR 2017 Page No. D-6, Item No.7). (PWD SOR = 1196 + 3% distric charge added for item no. a & PWD SOR RS 190 + 3% distric charge added for item no. b).6-32 A 4 Pole. 415 V MCB (Legrand make)
2
1231
-
SP 6-32 A 230 V MCB (Legrand make)
54
195
-
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. (W.B PWD SOR 2017 page number E-14, item number-1(a), iv & ii). (PWD SOR = 193 + 3% distric charge added for item no. a & PWD SOR RS 119 + 3% distric charge added for item no. b).2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC
85
198
-
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
300
122
-
Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. (W.B PWD SOR 2017 page number E-2, item number-3(b)). (PWD SOR RS 89 + 3% distric charge added).19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire
20
91
-
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (W.B PWD SOR 2017 Page No. D-9, Item No.13). (PWD SOR RS 1335 + 3% distric charge added for item no.a & PWD SOR RS 1293 + 3% Distric charge added b).2+6 Way (Seimens make)
5
1375
-
2+4 Way (Seimens make)
1
1331
-
Supplying and fixing 240/415 V MCB Isolator on
din rail of existing DBs and necessary connection. (W.B PWD SOR 2017 page number D-5, item number-6). (PWD SOR RS 322 + 3% distric charge added)
DP 32 A (Legrand make)
6
331
-
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) singlecore stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in19 mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]. (W.B PWD SOR 2017 page number E-15, item number-5). (PWD SOR RS 1191 + 3% distric charge added for item no.a & PWD SOR RS 793 + 3% Distric charge added b).Average run 10 mtr (Item no. e)
18
1226
-
Average run 6 mtr (Item no. b)
50
816
-
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5 A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. (W.B PWD SOR 2017 page number E-10). (PWD SOR RS 76 + 3% distric charge added for item no.a & PWD SOR RS 532 + 3% Distric charge added b).On Board (item number-4.a.i) 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC. (item number-4.a.i)
14
77
-
Average run 3 mtr. (item number-4.a.iii)
15
547
-
S & F Philips or equivalent make 230 V 20 W 2000 lm output Tube light upto surge protection 2 KV model name : Astra line (Analyse rate)
3
519
-
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. (W.B PWD SOR 2017 page number D-13, item number- 22). (PWD SOR RS 38 + 3% distric charge added).
3
39
-
S & F Philips/ Bajaj/ Crompton or equivalent make 230 V 10 W recessed mounted down light (square type) upto surge protection 2 KV Color temp 3000 K/ 4000 K/ 6000 K model name : DN097B LED 10S-6500 PSU WH. (Analyse rate)
14
1508
-
S & F Philips/ Bajaj/ Crompton or equivalent make 230 V 10 W recessed mounted down light (round type) upto surge protection 2 KV Color temp 3000 K/ 4000 K/ 6000 K model name : DN092B LED 10S-6500 PSU WH. (Analyse rate)
9
1508
-
S & F Philips/ Bajaj/ Crompton or equivalent make 230 V Led strip Color temp 3000 K/ 4000 K/ 6000 K with driver model : LED Strip SKYCove 5M WW with driver. (Rate per Mtr). (Analyse rate)
150
327
-
S & F Philips/ Bajaj/ Crompton or equivalent make 230 V 37 W Suspension type down light (Chandeliar) upto surge protection 2 KV Color temp 3000 K/ 4000 K/ 6000 K model name : 40936 WH, Color Bronze, Material : Metal Glass, Dimension : 648 X 648 X 800, 5 Led Integrated, 1900 LM output. bulb excluded (Analyse rate).
3
29261
-
S & F Philips/ Bajaj/ Crompton or equivalent make 230 V Max : 8 X 33 W Suspension type down light (Chandeliar) upto surge protection 2 KV Color temp 3000 K/ 4000 K/ 6000 K model name : 581854 WH, Color : Chrome & red Copper, Material : Borosilicate double Capsule glass outside, Dimension (mm) : Dia 720 X H 960, Lamp Base : G9 Led Integrated bulb excluded. (Analyse rate).
4
29834
-
S & F Philips/ Bajaj/ Crompton make Led lamp max G9 Led integrated 40 W Led light for model no. 581854. (Analyse rate)
32
375
-
S & F Philips/ Bajaj/ Crompton or equivalent make Double Head wall light, model no. 31426, Colour : Bronze, Material : Metal, Dimension : 150 X 272 X 227, Lamp Base : E-27. (Max : 2 X 20 W Led). Exclude bulb (Analyse rate).
27
3743
-
S & F Philips/ Bajaj/ Crompton or equivalent make 9 W Led bulb for model no. 31426. (Analyse rate).
54
218
-
S & F Bulk head light fittings (Havells make). (PWD SOR 2017 Page no. K-1, Item no.-29) (Added 3% distric charge on item rate).
11
535
-
S & F Crompton/ Anchor-Panasonic/ Orient or Equivalent make 300 mm sweep AC 230 V Exhaust fan model : Hill Air. (Analyse Rate)
5
2504
-
S & F Crompton/ Anchor-Panasonic/ Orient or Equivalent make 1200 mm sweep AC 230 V Celling Fan with Canopy, Downrod etc as required. (Analyse Rate)
2
7601
-
Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (W.B PWD SOR 2017 page number E-17, item number- 1). (PWD SOR RS 332 + 3% distric charge added for item no. a & PWD SOR RS 406 + 3% distric charge added for item no. b & PWD SOR RS 523 + 3% distric charge added for item no. c) 6 Module
10
341
-
8 Module
2
418
-
12 Module
1
538
-
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wireetc. (for sound system) (W.B PWD SOR 2017 page number E-18, item number- 9.b). (PWD SOR RS 456 + 3% distric charge added)
10
469
-
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Brand approved by EIC) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (For AC Starter). (W.B PWD SOR 2017 page number E-19, item number- 16). (PWD SOR RS 535 + 3% distric charge added)
4
551
-
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cuwire and earth continuity wire etc. (For AC Socket). (W.B PWD SOR 2017 page number E-17, item number- 4.b). (PWD SOR RS 162 + 3% distric charge added)
4
166
-
Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6 mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (W.B PWD SOR 2017 page number D-14, item number- 34.a.i). (PWD SOR RS 177 + 3% distric charge added).without angle iron support. 100x50x1.25mm (18SWG)
10
182
-
Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (W.B PWD SOR 2017 page number D-15, item number- 34.b). (PWD SOR RS 304 + 3% distric charge added).100x50x1.25mm (18SWG)
1
313
-
Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (W.B PWD SOR 2017 page number D-15, item number- 34.c). (PWD SOR RS 397 + 3% distric charge added).100x50x1.25mm (18SWG)
1
408
-
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (W.B PWD SOR 2017 page number G-1, item number- 2.a). (PWD SOR RS 1524 + 3% distric charge added).By TATA Meium GI Pipe
2
1569
-
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. (W.B PWD Sche. 2017, Item no 3(a) ,Page number G-2). (PWD SOR RS 915 + 3% distric charge added)
2
942
-
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. (W.B PWD Schedule, 2017, page number G-2, item Number-4(a)). (PWD SOR RS 156 + 3% distric charge added).
10
160
-
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/ floor with staples buried inside wall/ floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. (W.B PWD Sche. 2017 Page number G-2, Item no 5.iii,). (PWD SOR RS 13 + 3% distric charge added)8 S.W.G
25
9
-
Extra for treatment of soil by using salt & charcoal or coke for plate electrode. (W.B PWD Sche. 2017, page no- G-2, Item no-3.(b). (PWD SOR RS 531 + 3% distric charge added)
2
546
-
Main L.T Panel Supply, Design, manufacturing, testing of the subject panels as per approved drawing Front operated Floor mounting, indoor type, powder coated grey cubical, canopy at top cubicle enclosure with detachable un-drilled gland plate arrangement at bottom with 2 mm thick CRCA. All door & covers are rubber gasketed to make the enclosure dust & vermin proof conforming to IP-55 degree of protection. All fabricated structure, door & covers are chemically pre-treated in 9 tank process and thereafter apply of powder coated paint as per shade No, RAL 7A32. Power wiring will be carried out by 4 sq mm flexible copper wire of 1100V grade with proper sleeves, lugs and stud-nut type power terminal Control wiring will be carried out by 1.5 sq mm flexible copper wire of 1100V grade with proper ferrules and lugs. Incomer: a) 4P 125 A On load motorised Changeover switch with AST Controller-1 nos. b) 4P 125 A Thermal magnetic Based (O/L, S/C Protection) release MCCB with ROH, AUX + Alarm contact & Spreader terminal, ICU=ICS=25 kA-1 nos. c) Led R/Y/B Phase indication Lamp 240 V ac-3 Nos. d) Led ON/OFF/TRIP Status indicating Lamp 240 V AC-3 nos. e) CT, CL-1, 15 VA, 125/5- 3nos. f) 1 Phase Digital Ammeter, SIF-96, CL-1, CTR-5A, 240 V AC (0-125 A)-1 nos. g) 1 Phase Digital Voltmeter, SIF-96, CL-1 240 V AC, SIF-96, CL-1, 0-500 V- 1 nos. h) 6 A Ammeter Selector switch-1 nos. i) 6 A Voltmeter Selector switch-1 nos. j) 6 A 4P MCB, C-Curve, 10 kA-1 nos. h) 6 A DP MCB, C-Curve, 10 kA-3 nos. Busbar: Electrolytic grade Tinned Cu power bus bar rated for 125A having cross-section of 25x5mm/phase or equivalent (Neutral 100% of phase bus) with duly
colour coded by heat shrinkable sleeves supported on FRP/DMC insulator. 25x5mm Cu earth bus provided throughout the length of the panel bottom. Outgoing: a) 4 P 80A Thermal magnetic based (O/L, S/C Protection) release MCCB with ROH & AUX. & ALARM Contact, ICU=ICS=25kA - 2 nos. b) 4P 63 A MCB with AUX. & Alarm contact, C-Curve, 10 kA - 2 nos. c) 4P 40 A MCCB TMR Based with AUX. & Alarm Contact, C-Curve, 25 kA.-2 nos. d) 4P 32 A MCB with AUX. & Alarm Contact, C-Curve, 10 kA.-3 nos. e) Led ON/OFF/TRIP Status Indicating Lamp 240 V AC- 27 nos. f) 1 Phase Digital Ammeter, SIF-96, CL-1, CTR-5A, 240 V AC (0-80 A)-2 nos. g) 1 Phase Digital Ammeter, SIF-96, CL-1, CTR-5A, 240 V AC (0-60 A)-2 nos. h) 1 Phase Digital Ammeter, SIF-96, CL-1, CTR-5A, 240 V AC (0-40 A)-2 nos. i) 1 Phase Digital Ammeter, SIF-96, CL-1, CTR-5A, 240 V AC (0-30 A)- 3 nos. j) Ammeter Selector Switch 6 A- 9 nos. k) CT, CL-1, 15 VA, 80/5- 6 nos. l) CT, CL-1, 15 VA, 60/5- 6 nos. m) CT, CL-1, 15 VA, 40/5- 6 nos. n) CT, CL-1, 15 VA, 30/5- 9 nos. o) 6 A DP MCB, C-Curve, 10 kA-9 nos. (Main L.T Panel Make- Zenith Control/ AC Power/ Power Control Solution/ System Control/ PCE or equivalent) (MCB or MCCB Make- Siemens/ L&T/ Legrand/ Schneider/ ABB or equivalent) (Power Contactor Make- Siemens/ L&T/ Legrand/ Schneider/ ABB or equivalent) (Relays Make- L&T/ Schneider/ ABB/ C&S/ or equivalent) (CT Make- Kappa/ Instrans/ BMC/ Plasto Fab/ Secure/ Elmeasure/ Kappa/ AE/ GUPTA or equivalent) (Push Bottom & Indication Led Make- ESBEE (L&T)/ Siemens/ Stronger/ Jigo/ BCH or equivalent) (Selector Switch- Kaycee/ L&T/ Rishav/ Siemens or equivalent) (Analyse Rate).
1
258688
-
HVAC MCC Panel : Supply, Design, manufacturing, testing of the subject panels as per approved drawing Front operated Wall mounting, indoor type, powder coated grey cubical, canopy at top cubicle enclosure with detachable un-drilled gland plate arrangement at bottom with 2 mm thick CRCA. All door & covers are rubber gasketed to make the enclosure dust & vermin proof conforming to IP-55 degree of protection. All fabricated structure, door & covers are chemically pre-treated in 9 tank process and thereafter apply of powder coated paint as per shade No, RAL 7A32. Power wiring will be carried out by 4 sq mm flexible copper wire of 1100V grade with proper sleeves, lugs and stud-nut type power terminal Control wiring will be carried out by 1.5 sq mm flexible copper wire of 1100V grade with proper ferrules and lugs. Incomer : 1) 1 no. 63 A TPN MCB 'C' Curve 10 kA 2) 1 set R-Y-B Phase Indication Led 230V AC 3) 1 no. 1 Phase Digital Ammeter CL-1 SIF-96X96 sq.mm. 4) 1 no. 6 A Ammeter Selector switch. 5) 1 no. 1 Phase Digital Voltmeter CL-1 SIF-96X96 SQ. MM. 6) 1 nos 6 A Voltmeter Selector switch. 7) 3 no. 60/5A, 5VA, CL-1 TAPE WOUND CT. 8) 6 no. 6 A SP MCB 'C' Curve 10 kA BUSBAR : 4 BAR BUSBAR (415 V 80 A ) 1 SET - 5 NOS. 20 X 6 MM (R-Y-B-N) CUPPER BUS BAR ON DMC/SMC
INSULATOR FOR SUPPORT AND DULY TAPPED BY INSULATING TAPE 1.1 KV GRADE .
EARTH BUS : 1 NOS. 20 X 6 MM 'CU' EARTH BUS LENGTH WISE OF THE CUBICLE DULY TAPPED
AND EARTH BOLT AT THE BOTH END FOR CONNECTING THE EARTH BUS OF THE ROOM. Outgoing : 1) 4 no. 32 A TPN MCB 'C' Curve 10 kA. 2) 4 Set Run-Trip-Off Indication Led (R-Y-B). 3) 4 no. 1 Phase Digital Ammeter CL-1 SIF-96X96 sq.mm. 4) 4 no. 6 A Ammeter Selector switch. 5) 12 no. 30/5A, 5VA, CL-1 TAPE WOUND CT. 6) 4 no. Thermal Overload Relay 24-40 A. 7) 4 no. 32 A Power Contactor AC-2. 8) 4 Set ON-OFF Push Bottom. 9) 4 no. 6 A DP MCB 'C' Curve 10 kA for control wiring. (HVAC MCC Panel Make- Zenith Control/ AC Power/ Power Control Solution/ System Control/ PCE or equivalent) (MCB or MCCB Make- Siemens/ L&T/ Legrand/ Schneider/ ABB or equivalent) (Power Contactor Make- Siemens/ L&T/ Legrand/ Schneider/ ABB or equivalent) (Relays Make- L&T/ Schneider/ ABB/ C&S/ or equivalent) (CT Make- Kappa/ Instrans/ BMC/ Plasto Fab/ Secure/ Elmeasure/ Kappa/ AE/ GUPTA or equivalent) (Push Bottom & Indication Led Make- ESBEE (L&T)/ Siemens/ Stronger/ Jigo/ BCH or equivalent) (Selector Switch- Kaycee/ L&T/ Rishav/ Siemens or equivalent). (Analyse Rate).
1
100838
-
SITC of Premium quality LED PARCAN Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Single COB LED Source
• Power Factor : 0.95 @ 230V AC 50Hz
• Color Temperature : 3200K with CRI & TLCI Value 90
• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1/2 DMX-512 Channel Modes
• Beam angle: 9°/15°/20°/25°/30° Manually Selectable • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run • Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.
• LUX @ 2m: 40,000 @ 9° Beam Angle
• Flickering Rate : more than 10000 FPS • Dimming: 0 - 100% Electronic Dimming . • Function: Strobe, Dimming • Housing : Spun Aluminium Housing with black epoxy polyster powder coated finish.
• Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected. • Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 5 Pin XLR connectors • Certification: CE / BIS. Make : Canara Lighting / Shenoy Lighting / Phillips / Elation
10
32519
-
SITC of CE Certified LED RGBW Cyclorama Wash Light with RDM protocol and Laser cut aluminium body duly epoxy polyester powder coated in black matt texture finish with following specifications -
• LED : 480x0.5W RGBW LED (120R + 120G + 120B+ 120W) Nichia or Lumiled Make LED • Beam Angle : 96°
• Detachable Assymmetric reflector with 64°, 62° for uniform wash. • Light Out put : 3000 Lux at 1 Mtrs without assymmetric reflector. • User Interface : 4 Nos High Precision Tactile type selector switch with Seven Segment Display • Fully RDM Compliant when in DMX mode • Dimming : 0 to 100% 8 Bit Linear Dimming • DMX data IN / OUT: 5 pin locking XLR • Natural Cooling System. No fan, No noise.
• 2.5 m Power In + 0.5 m Power out or 3 Mtr 3 core 1 mm² FRLS & ISI mark cable with 3pin IEC Male Plug • 3 mtr DMX loop cable with cable mount 5 pin locking XLR • CE Certificate should be enclosed to ensure the required quality and safety of the products. Make : Canara Lighting / Shenoy Lighting / Phillips / Elation.
4
59640
-
SITC of Premium quality LED Blinder Effect Light with latest RDM technology for user friendly operation with below specifications: ● Light Source : Quad LED COB Source
• Power Factor : 0.95 @ 230V AC 50Hz
• Color Temerature : 3200K, CRI & TLCI Value 95
• R9 Value 94
• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 4/8 DMX-512 Channel Modes
• Beam Angle : 40°
• Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run
• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.
• Lux output at 2 Mtr : 4,000 Lux @ 40°
• Flickering Rate : more than 10000 FPS • Dimming: 0 - 100% Electronic Dimming
• Power and DMX: Loop in and loop out compulsary
• DMX in & Out Through : 5 Pin XLR connectors
• Certification: CE / BIS. Make : Canara Lighting / Shenoy Lighting / Phillips / Elation.
8
40362
-
SITC of Premium quality LED PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color RGBW Color Mixing
• LED Configuration : Multiple Nos Individual RGBW LED Configuartion
• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 8 DMX-512 • CRI : 90
• Beam angle: 15° • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run, Sound Active
• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.
• LUX @ 2m: 10,500 @ 15° Beam Angle
• Dimming: 0 - 100% Electronic Dimming
• Function: strobe, dimming, sound active and Master slave.
• Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish.
• Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected.
• Power and DMX: Loop in and loop out compulsary
• DMX in & Out Through : 5 Pin XLR connectors
• Certification: CE / BIS. Make : Canara Lighting / Shenoy Lighting / Phillips / Elation.
12
14590
-
SITC of Premium quality LED Profile Spot Light with latest RDM technology for user friendly operation with below specifications: ● Light Source : Single LED COB Source
• Power Factor : 0.95 @ 230V AC 50Hz
• Color Temerature : 3200K, CRI & TLCI Value 95
• R9 Value 94
• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1/2/3 DMX-512 Channel Modes
• Beam Angle : 19° or 15°
• Control mode: RDM, DMX512 & Manual, Master/ Slave, Auto run
• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.
• Lux output at 2 Mtr : 20,000 Lux @ 19° or 15°
• Flickering Rate : more than 10000 FPS • Dimming: 0 - 100% Electronic Dimming
• 4 Beam shaping shutters
• Accessory slot for Gobo and gobo holder, Iris & Color Frame should be available or else fixture will be rejected.
• Housing: Metal Housing with black epoxy polyster powder coated finish or PVC Body with matt black finish
• Power and DMX: Loop in and loop out compulsary
• DMX in & Out Through : 5 Pin XLR connectors
• Certification: CE / BIS. Make : Canara Lighting / Shenoy Lighting / Phillips / Elation.
2
83742
-
SITC of Premium quality LED PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color 3200K Color Mixing
• LED Configuration : Multiple Nos Individual 3200K LED Configuartion
• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1 DMX-512 • Beam angle: 15° • Control mode: RDM, DMX512 & Manual
• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.
• LUX @ 2m: 7,500 @ 15° Beam Angle
• Dimming: 0 - 100% Electronic Dimming
• Function: strobe, dimming, sound active and Master slave.
• Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish.
• Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected.
• Power and DMX: Loop in and loop out compulsary
• DMX in & Out Through : 5 Pin XLR connectors
• Certification: CE / BIS. Make-Canara Lighting / Shenoy Lighting / Phillips / Elation.
6
14453
-
SITC of 150W LED Beam, Spot, Wash MOVING Light with RDM protocol and Hi grade plastic body black color with following specifications - • LED : 150W • Beam Angle : 3°~7° , Zoom Angle : 7°~21° • Power Consumption : 150W ± 10% • Light Out put : 19,000-20,000 Lux at 2 Mtrs • Color Wheel : Minimum 7 Colors and open or More • Fixed Gobo Wheel : Minimum 10 Fixed Gobos or More • Rotating Gobo wheel : Minimum 6 Rotating Gobos or More • User Interface : 4 Nos High Precision Membrane type selector switch with LCD Display • Fully RDM Compliant when in DMX mode • Dimming : 0 to 100% 16 Bit Linear Dimming • DMX data IN / OUT: 5 pin locking XLR • Cooling system with low noise fan for forced ventilation • 3 Mtr 3 core 1 mm² FRLS & ISI mark cable with 3pin IEC Male Plug with proper earthing • 3 mtr DMX loop cable with cable mount 5 pin locking XLR. Make: Canara Lighting / Shenoy Lighting / Phillips / Elation.
2
95358
-
SITC of Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications.
• Lock - MS threaded Galvanized lock key, • Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot. • Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. • Self-weight - 0.54 Kg. Make: Canara Lighting / Shenoy Lighting / Phillips / Elation.
46
1052
-
Safety bond with lock clip 1.5 Mtr Long made with twisted pair of GI wire rope, 2mm or 3mm Thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly. SWL 150Kgs. Make: Canara Lighting / Shenoy Lighting / Phillips / Elation.
46
340
-
79mm Round Identification name plate duly epoxy polyester powder coated in matt texture finish. Make: Canara Lighting / Shenoy Lighting / Phillips / Elation.
46
200
-
MS Pipe of Class ‘B‘ 48mm OD to be used for making 1x1mtr square matrix grid used for suspending Lighting fixtures and other equipment for fulfilling all the requirement for Studio Lighting. Make : Shenoy Lighting /Canara lighting/ Jindal /Tata
180
723
-
Customized MS Suspenders made up of • MS fish plate 150 x 150 x 6 mm with hardware’s if required as per site condition
• MS Angle 40 x 40 x 5 mm or higher size required length as per site condition to Hold the "C" track rigidly held With SWL of 200kg. (As per site requirement).
• Height adjustable M12 stud of suitable length as per site requirement along with suitable hardware’s with pipe coupler clamp. (As per site requirement).
• All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. Make - Shenoy Lighting /Canara lighting/ Jindal / Tata.
35
2018
-
Front of Stage Light Bar, length 8 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications:
• Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch. Make- Shenoy Lighting /Canara lighting/ Jindal / Tata
1
27594
-
MS Side Lighting Ladder of suitable length and Width (Min 1800 mm Height & 600 mm Width)
• Made using 40NB, 48MM OD, 2mm thickness MS Pipe • Suitable suspender and clamps made with MS Angle of size 40x40x5 mm thick or higher size
• Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp, • Heavy duty Ladder Track to be laid throughout the depth of the stage.
• 360° Rotatable and can move in unidirectional
• All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. Make : Shenoy Lighting /Canara lighting /Jindal / Tata
4
15933
-
MS Fabricated 4 way 10A, 250V A.C, IEC, Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures with Pipe clamp arrangement for fixing on pipe grid or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish. Make : Canara Lighting / Shenoy Lighting / Nutrik / Amphenol / ABB / Havels / L&T
15
719
-
MS Fabricated 2 way 10A, 250V A.C, IEC, Junction box made up of 22SWG CRCA with rocker switch to power up splitter and console with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish. Make : Canara Lighting / Shenoy Lighting / Nutrik / Amphenol / ABB / Havels / L&T.
3
599
-
MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. Make : Canara Lighting / Shenoy Lighting / Nutrik / Amphenol / ABB / Havels / L&T
1
851
-
MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX female socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. Make : Canara Lighting / Shenoy Lighting / Nutrik / Amphenol / ABB / Havels / L&T
8
851
-
Fabricated 5 pin DMX Signal loop Junction box fitted with 5 pin DMX Male & Female socket with 0.3 Mtr DMX Loop cable fitted with 5 pin DMX cable mount plug, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. Make : Canara Lighting / Shenoy Lighting / Nutrik / Amphenol / ABB / Havels / L&T.
1
2324
-
Well designed 15 Way Direct Lighting Distribution Board made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt texture finish consists of R, Y, B Indicator lamp, 32A TPN incomer, SP Mcb's and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete. Make : Canara Lighting / Shenoy Lighting / / ABB / Havels / L&T
1
59746
-
Auxiliary marshalling box for power and signal cable termination in grid level and in Motorised Light bar
• CE Marked FC/PG cable entry gland required Nos as per cable entry.
• MS channel arranging to fix terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. • Grey terminal connector with each line having P, N, E Indication for each line incoming and out going cable connectors.
• Box door must be made with Hingeable door with screw lock. • Made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. Make- Canara Lighting / Shenoy Lighting / / ABB / Havels / L&T
1
7304
-
Motor Cable Termination box for power cable termination at grid level.
• CE certified FC/PG 11 & 13.5 cable entry gland required Nos as per cable entry.
• MS channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. • Grey terminal connector with each line having L1, L2, L3, E, 6 , 2 , 4 Indication for each line incoming and outgoing cable connectors (L1, L2, L3, E for Power supply & 6 , 2 , 4 for Limit Switch connection)
• Box door must be made with Hingeable door with screw lock. • Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing
• MS Boxe made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. Make : Canara Lighting / Shenoy Lighting / / ABB / Havels / L&T.
2
1064
-
MS Fabricated Combined 2 Way Motor Control Center panel cum Remote Control panel for Curtain & Light bar system made up of 14SWG / 16SWG / 18 SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt seaman’s grey texture finish with following specifications.
• 16A TP or TPN Incomer. • Main Contactor of 9A 240V 4 pole contactor with 04 -06A Over Load relay for safety • 24V 4 pole Low Voltage Contactors • 240V / 24 V Step-down transformer for Low voltage Contactors • All the FRLS PVC ISI Marking cables inside the panel routed through PVC gray color cable trough. • Red Color Mushroom head push button for emergency stop • Yellow color reset push button • Master sector actuator switch with 3 Position UP, DOWN & OFF • Spring return selector switch for each hoist with UP & DOWN indication. • All the cables inside the panel routed through PVC gray color cable trough. • Panel Including wiring with proper earthing. Make : Canara Lighting / Shenoy Lighting / / ABB / Havels / L&T.
1
79660
-
RDM Compatible DMX Splitter unit with Minimum following specifications.
● 1 Nos 5 Pin DMX In socket and 8 Nos 5 Pin DMX Out socket
● In and out signal Optically Isolated
● Atleast 8 LED Indicator for check the signal flow in each output.
●Suitable for standard 19” cabinet
● Duly black epoxy polyester powder coated texture finish. Make : Avolites / Liteputer / Zero 88 / Canara Lighting / Chamsys
1
26554
-
SITC of RDM Compatible Digital Lighting console with Minimum following specifications.
● 1024 Channel, 2 Universe, ● 2 nos of DMX 5 Pin output.
● No. Of Direct Fixture Control : Atleast 120
● No. Of Faders : Atleast 20 ● No. Of Playback : Atleast 3
● Atleast 3 Encoder Wheels
● LCD Diplay for user interface
● Should support ART-NET Port ● Fully RDM Compiant in DMX Mode. Make : Avolites / Liteputer / Zero 88 / Canara Lighting / Chamsys
1
112850
-
5 pin XLR male / female connectors of made up of Extra high temperature resistant insulator material, Larger solder contacts for easier termination. Make : Canara Lighting / Nutrik / Amphenol / Litepute
12
321
-
5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister with 0.25Watt for signal termination. Make : Canara Lighting / Nutrik / Amphenol / Litepute
8
346
-
PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm.
650
134
-
FR Grade DMX Signal 4 core + Ground shielding Cable with CE mark for the Signal network. Make : Falcon / Deepcab / Beldon/ Polycab/ KEI
250
162
-
MS perforated tray of Size 40 x 75 x 40mm & 1.6 mm Thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement. Make : Ricco / Canara Lighting / Plico
75
864
-
Internal earthing copper bare conductor of size 14 SWG for power network related to work coming under our scope.
1
10954
-
Installation hardware’s such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work.
1
21908
-
Main Curtain track system 10.8 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. • 1.0 HP Motor, 3 Phase Motor. • GI wire ropes with steel core at center. • Curtain holding trollies placed uniformly at specific interval of 200mm /250 mm throughout the track. • Diverter pulley • MS yellow passivized Routing pulleys with ball bearing for smoother noiseless movement 165mm for outer diameter, 145mm diameter at groove base with 12mm pulley thickness. • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. (Make : Canara Lighting / Shenoy Lighting /Waagner Biro).
1
298624
-
Rear Curtain track system 10.8 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. • 1.0 HP Motor, 3 Phase Motor. • GI wire ropes with steel core at center. • Curtain holding trollies placed uniformly at specific interval of 200mm /250 mm throughout the track. • Diverter pulley • MS yellow passivized Routing pulleys with ball bearing for smoother noiseless movement 165mm for outer diameter, 145mm diameter at groove base with 12mm pulley thickness. • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. (Make : Canara Lighting / Shenoy Lighting /Waagner Biro).
1
298624
-
MS, Wing frame made out of 25X25mm or higher size made of MS square pipe with 2mm in thickness undergone through various chemical treatment to keep them rust free and duly powder coated in black matt texture finish with Below Specifications:
• Wing Frame Size 5.5 x 1.5 Mtr • 1.5meter wing track of 48x84mm with grid mount brackets made of 40X50X40mm C track,
• Pivotable 4 wheeled suspension trolley,
• Adjustable floor locking screw jacks with rubber grips, • Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp, • Heavy duty wing track to be laid for minimum length of 1.5mtr, along the width of the stage. • 360° Rotatable and can move in unidirectional • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. (Make : Canara Lighting / Shenoy Lighting /Waagner Biro).
6
33157
-
Cyclorama frame arrangement of size 9 Mtr x 5 Mtr undergone through various chemical treatment
to keep them rust free and duly powder coated in black matt texture finish with Below Specifications:
• Heavy duty Cyclorama 9Mtr Length duly epoxy polyester powder coated in black matt texture finish to use as straight cyclorama track
• MS fabricated Grid/wall mount bracket constructed of C track of dimension 40X50X40mm duly powder coated to hold the Cyclorama track,
• MS fabricated Tie down railing cut length 3 mtr duly powder coated to keep the cyclorama in drum
tight arrangement,
• 2 wheeler trolley placed uniformly at specific interval of 200mm/250mm throughout the track to hold the cyclorama screen
• MS powder coated Leading edge pipe of 25NB, 33.4MM OD, 2mm thickness to keep the cyclorama
in drum tight arrangement.
• All the MS materials under gone through 7 tank process with various chemical treatment to keep
them rust free with and duly epoxy polyester powder coated in black matt texture finish. (Make : Shenoy Lighting /Canara lighting /Jindal /Tata).
1
79258
-
Main Valance Bar, length 10.8 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders. (Make : Shenoy Lighting /Canara lighting /Jindal /Tata).
1
27471
-
Main Curtain Fabric : Fire retardant velvette fabric with lining 100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 300 GSM, duly stitched along with eyelets. (Make : Nexgen / Omphile / Mayur).
1
231216
-
Main Valance Fabric : Fire retardant velvette fabric 100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 300 GSM, duly stitched along with eyelets. (Make : Nexgen / Omphile / Mayur).
1
40224
-
Rear Curtain Fabric : Fire retardant cotton fabric 50% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. (Make : Nexgen / Omphile / Mayur).
1
119418
-
Frill Fabric : Fire retardant cotton fabric 50% gathering as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. (Make : Nexgen / Omphile / Mayur).
2
21935
-
Wing Fabric : Fire retardant cotton fabric 0% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. (Make : Nexgen / Omphile / Mayur).
6
22211
-
Perforated plastic Cyclorama screen with seam welded, off white, with eyelets along all four sides, perforated plastic screen with eyelets. (make : GTC / Canara Lighting / Showtex)
1
119875
-
PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 7cx1.5 sq mm. (Make : Walna /Polycab / KEI / SBEE)
60
283
-
PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 4cx 4 sq mm. (Make : Walna /Polycab / KEI / SBEE)
15
424
-
VRF /VRV Based ODU Supply of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling only, having all hermetically sealed inverter type Scroll Compressor(s), with motor having 6 pole, minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. with refrigerantcooled PCB for better performance complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads.The ODU shall have low noise condenser fans with external static pressure of the outdoor unit shall be more then 75 Pa to avoid hot air recirculation, auto address setting, auto check function for connection error and complete with indoor and outdoor units with individual controller and with fittings etc. The compressor and VRV/VRF Outdoor make should be same. The compressor motor pole should be more than 4 for enhanced energy savings. The unit shall also have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respect to load for better comfort and energy efficiency.The Unit should have free phase technology so that unit can work in case of phase reversal also without tripping of units. (Make-Hitachi, Daikin, Voltas)
1
1273856
-
Air Handling Unit (AHU) Supply of Double skin AHU with Outer skin 1 mm Pre- coated G.I. Inner Skin 0.8 mm Plain G.I. Frame work, Thickness of insulated panels, 45 mm thick, CFC Free PUF injected (Density: 40 kg / Cu. m.) Material of Drain pan, SS 304-20 G Tray duly insulated with 13 mm closed cell Nitrile insulation. Unit Base G.S.S base channel.Cooling Coil 6 RD, Material Of Tube - Copper 12.7 mm dia, 1/2 " thickness, 10-13 FPI Aluminium, DIDW Backward curbed fan with TEFC Squirrel Cage IP 55 Protected. (Make-Hitachi, Daikin, Voltas). 45 TR, 18000 CFM, Static Pressure 100 mm
1
860847
-
AHU connecting kit
3
5000
-
AHU controller
3
25000
-
VRF Y JOINTS FOR BRANCH DISTRIBUTION REFRIGERENT PIPE JOINTS Outdoor branch joints
3
3000
-
Supply, installation, balancing and commintioning of fabricated at site GSS sheet metal rectangle/round ducting complete with neoprene gaskets, elbow, splitter damper, vanes, hangers, supports etc. As per approved drawings and specifications of following sheet thickness complete as required.Thickness 1.00 mm sheet
50
2000
-
Thickness 0.80 mm sheet
200
1500
-
Thickness 0.63 mm sheet
200
1000
-
Supplying and fixing thermal insulation 19 mm thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete per specifications and as required.Valves should have pressure rating of 25 Bar minimum.
450
950
-
Supplying, fixing, testing and commissioning of supply air diffusers of powder coated Grills
15
7000
-
Canvas Connection
2
5000
-
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required.6.4 mm dia (OD) (Soft drawn) 13 MM INSULATION
10
226
-
9.5 mm dia (OD) (Soft drawn) 13 MM INSULATION
15
356
-
12.7 mm dia (OD) (Soft drawn) 13 MM INSULATION
15
484
-
15.86 mm dia (OD) (Soft drawn) 13 MM INSULATION
15
756
-
19 mm dia (OD) (Hard drawn) 19 MM INSULATION
20
742
-
22.2 mm dia (OD) (Hard drawn) 19MM INSULATION
20
870
-
25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
25
1122
-
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
25
1402
-
31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
20
1714
-
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
40
2076
-
38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
40
2470
-
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
45
2898
-
Supply & fixing of control cum transmission wiring of Copper conductor cable along with PVC conduit for looping between indoor & outdoor VRF system.Supply & Laying of 2 C X 10 Sq. mm (Make-Polycab/ KEI/ Falcon/ Havells).
200
95
-
Additional Refrigerant charging
70
950
-
Supply & Installation of Outdoor structure
1
12000
-
Lifting & Shifting of outdoor units
1
18000
-
Supply, Installation & testing of 4P 80 A Thermal magnetic MCCB 25 kA with enclouser box (Panel Board).
1
20000
-
Supply & Laying of 4C X 25 Sqmm 'AL' Cable from Electrical Panel to HVAC panel
50
430
-
Inverter Split Airconditioning System Supply & Installation of 1.5 Tr Inverter Split AC (Make-Daikin/ Hitachi/ Voltas)
4
69850
-
Supply & Installation of Copper Refringent piping for Split. 20 ft per Machine. (Make-Daikin/ Hitachi/ Voltas).
80
290
-
Supply & Laying of Communication cable between Indoor and outdoor for Split. 20 ft per Machine. (Make-Polycab/ KEI/ Beldon/ Havells).
80
75
-
Supply & Installation of Water Drainage Pipe. 15 ft per Machine
60
35
-
Supply & fixing of MS ODU structure with proper grouting of ms channel inside wall & proper supporting angle, after fabrication duly paint with primer and weather proof enamel coating for Split unit.
4
989
-
Wireless Handheld Microphone Set:
SITC of wireless hand held microphone with cardiod polarity pattern, true diversity receiver, Frequency range: 470 - 516 MHz , 516 - 558 MHz , 734 - 776 MHz, THD, total harmonic distortion ≤ 0.9 % or better ; Signal-to-noise ratio ≥ 110 dBA or better ; Switching bandwidth up to 42 MHz or better; Max. 1600 or more receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels,
Approved Makes: Sennheiser, Clock Audio, Shure. Model No. SVX24/PG58
1
36164
-
Gooseneck Microphone with Base: SITC of pre-polarized condenser gooseneck microphone with overall length of 450mm or better, with XLR3M-type connector, shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 dBspl or better, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (100 ohms) with current consumption shall be 3 mA or better; should be supplied with base from same OEM
Approved Makes: Sennheiser, Clock Audio, Shure. Model No : MX418D/C
1
38116
-
Wired Handheld Microhone:
SITC of dynamic super-cardioid vocal microphone with frequency response of 40 Hz – 16,000 Hz or better and sensitivity of 1.8 mV/Pa at 1 kHz or better, nominal impedance of 50 Ohm or better and min. terminating impedance of 1 k Ohm or better. Approved Makes: Sennheiser, Clock Audio, Shure. Model No : SM48-LC
1
20129
-
24 channel Analog Audio Mixer:
SITC of Analog Audio Mixer with 20 line inputs ( 16 mono and 4 stereo ), 4 GROUP Buses + ST Bus, 6 AUX Sends + 2 FX Sends, 1 Matrix out, FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) on b-board processors; MIC: 24 (INPUTS HPF: 100Hz 12dB/oct), 48V phantom power per channel; LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo; Digital I/O: USB Device, iPod / iPhone
Approves Makes: Yamaha, PRESONUS, RCF, Dynacord
1
87366
-
12 x 8 Audio DSP:
Supply , installation , testing and comissioning of Digital Signal Processor with at least 12 Mic/Line inputs & 8 analog outputs, 24 Bit A-D and D-A Convertors; Sampling Rate : 48 kHz; THD : 0.002 % ; Channel Separation (Crosstalk) : 108 dB ; Frequency Response 20 Hz - 20 kHz ; Signal-to-Noise Ratio 90 dB ;Dynamic Range 115 dB; 5 Control Inputs and Outputs; RS-232 and Ethernet Port for third party Control and Monitoring; 64x64 Bidirectional DANTE Audio Networking ports, Shall include standard Connectivity features like VOIP, POTS, USB Audio etc. inbuilt DSP features like Conference room Routers, Input Equalizers, Router, Band Pass filter, Output Equalizer, Delay, Limiters, gates , Source selectors etc. Shall Support at least 15 remote Zone controllers.(Model No : EX1280, from Bose Professional price List 2022 1st September).
Approved Makes: Extron, ClearOne, Bose. Model No. Ex1280
1
372261
-
Right Cluster & Left Cluster Loudspeakers
Supply, installation, testing and commissioning of single 12-inch or better high SPL compact loudspeaker. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 60Hz - 20 kHz or better; Nominal Dispersion : 110°H x 60°V or better; Power handling of 300W or more; Sensitivity : 96 dB or better and the Max SPL : 121dB Peak or more with a Nominal impedence of 8 ohms.(Model No : AMM112, from Bose Professional price List 2022 1st September). Approved Makes: L -ACOUSTIC/D&B AUDIOTECHNIK/BOSE. Model No. AMM112
2
331114
-
Array Frames:
Supply, installation, testing & Commissioning of OEM array frames/ Hanging/ Mounting arrangement for Suspension of upto 8-10 array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings alongwith OEM array frame pull back hardware for extreme pitch angles. (Model No :AMM112-U bracket from Bose Professional price List 2022 1st September). Approved Makes: L -ACOUSTIC/D&B AUDIOTECHNIK/BOSE, Model No. AMM112 U Bracket
2
23682
-
Subwoofer:
Supply, installation, testing & Commissioning of a single 15" subwoofer. The louspeaker shall meet the following criteria: usable Frequency Range (-10 dB) of 35Hz - 130Hz or better. It should have an axial Sensitivity of = 90dB (1W/1m) or more delivering a free field Max. Calculated SPL(peak) of =117 db or better. The loudspeaker should have a nominal impedance: 8ohm or more and continuous Power Handling of 500W or more; Complete with installation as per the site requirement. (Model No :AMS115 from Bose Professional price List 2022 1st September). Approved Makes: L -ACOUSTIC/D&B AUDIOTECHNIK/BOSE. Model No. AMS115.
2
281167
-
Delay Fills-
Supply, installation, testing & Commissioning of Low profile High SPL Delay Fills loudspeakers with single 8" LF Driver & 1.5" or better VC compression driver; Frequency Range of 80 Hz - 16 kHz or better; Nominal Dispersion : 120°H x 60°V; Long term Power handling of 200 W or better, Peak 800W or Better ; Sensitivity : 92 dB; Max SPL : 122dB Peak; Nominal Impedance : 8Ω; 18-gauge (1.2 mm) perforated steel; Powder-coated finish grille with Two-part spray polyurethane coating Enclosure. Shall include In-box 100W OEM Input transformer kit for Distributed system. (Model No :AMU108 from Bose Professional price List 2022 1st September). Approved Makes: L-Acoustics/EAW/Bose. Model No. AMU108
2
141162
-
Stage Monitors:
Supply, installation, testing and commissioning of a two-way Single 8-inch or better high SPL Powered Stage Monitor loudspeaker. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 70Hz - 18 kHz or better; Nominal Dispersion : 90°H x 60°V or better; Power handling of 1000W peak or more; Sensitivity : 93 dB or better; Max SPL : 120dB Peak or more with a Nominal impedence of 8 ohms. (Model No : S1 Pro from Bose Professional price List 2022 1st September). Approved Makes: L-Acoustics / EAW / Bose. Model S1 Pro
2
67991
-
Amplifiers for Main Arrays, Delay Fills :
Supply, installation, testing and commissioning of Four channel class D Power amplifier with a Max Output Power of 4x300W@8 ohms, or bridged mode output power of 2x 600W @ 8/4 ohms. 20Hz - 20 KHz, SNR of 102dB and THD + N of 0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot. Approved Makes: Lab Gruppen/Powersoft/Bose. Model No. P4300A
2
197374
-
Amplifiers for Subwoofer & Other Areas:
Supply, installation, testing and commissioning of Class D configurable amplifier with total 2 x 1000W output power or better across 2 outputs, 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ;THD 0.04% at rated output .Approved Makes: Lab Gruppen/Powersoft/Bose. Model No. P21000A
1
175084
-
Mic/Audio and Control Cable:
SITC of Single 20 AWG shielded twisted pair with drain wire high performance cable for serial control/audio signals, should be color-coded, tinned copper conductors wrapped in a foil shield, cable includes a tinned copper drain wire on the inside of the foil shield, which is bonded to the jacket for ease of stripping when used with automatic stripping equipment - single twisted pair only
Approved Makes: Liberty AV, Mescab, Belden
200
123
-
Speaker Cable:
SITC of 14 AWG ATC copper conductor Speaker Cable in the conduit i/c connection ,interconnection etc complete as required and as per attached specifications or better
(Makes:-Liberty AV ,Mescab,Belden)
400
126
-
Junction Box:
SITC of 16 channel Junction box with XLR, Male, Female & Speakon connectivity Approved Makes: Legrand, MX, K&M
4
7729
-
Supply , installation , testing and comissioningLight weight tripod alluminium Microphone stand with Long Arm, boom type & chrome plating
Approved Makes: K&M/ Samson/Aptron
2
9636
-
Bulk Connectors and accessories & System Programming Supply, Installtion, Testing & Commissioning of all the required XLR,Male,Female & Speakon connectors and other additional accessories including Array Speakers Connectivity & Complete Audio & Visual System Programming Approved Makes: Extron, MX, Neutric, Usha Martin
1
35022
-
Sub-Total
-
-
27404724.43
GST 18%
1
4932850
-
CESS 1%
1
323375
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%