Municipal Affairs Department Tender

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.(M1)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto PL. levelof ground floor). (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.(M1)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety AS PER P.W.D. SCHEDULE OF 2017,(M1) ITEM NO.4(a),PAGE NO.-24

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge.(White cement, synthetic adhesive and grout material to be supplied by the contra conc. (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour Page no --66 (Item no - 36/1/b) (A1)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative Page no -64 (Item no - 35/B/a/i) (A1)

(ii) With 1:4 cement mortar c) 10 mm thick plaster

Dismantling Indian W.C. including taking out baseconcrete as necessary. AS PER P.W.D. SCHEDULE OF 2017,(M1) PAGE NO.-85. ITEM NO.2.

Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excludingcost of concrete for fixing).AS PER P.W.D.SCHEDULE OF 2017,(M1) b) With 'S' trap (with vent) PAGE NO.-79. ITEM NO.3(b) .

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. AS PER P.W.D. SCHEDULE OF 2017,(M1) PAGE NO.-80. ITEM NO. 6(ii)

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately)AS PER P.W.D. SCHEDULE OF 2017,(M1) PAGE NO.-80. ITEM NO. 7(i) .

Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th.......AS PER P.W.D. SCHEDULE OF 2017,(M6) PAGE NO.-26.ITEM NO. 10 .

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6m height for external wall) (i) 4 mm thick (weighing 7.4 kg/Sq.m) AS PER P.W.D. SCHEDULE OF 2017, (M4) PAGE NO.-205.ITEM NO. 1 .

Brick work with 1st class bricks in cement mortar (1:6). (a) In foundation and plinth. Area : Kolkata / 24 Pgs (N & S) /Area of Kalyani Sub Div. Page no -15(Item no - 8/a) (E7)

Cement concrete ( 3:1.5:1 ) with graded stone chips ( 20mm. size ) excluding shuttering and reinforcement, if any. AS PER P.W.D. SCHEDULE OF 2017, (M7) PAGE NO.-26. ITEM NO.10 .

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. AS PER P.W.D.SCHEDULE OF 2017 (M7) PAGE NO.-43,44. ITEM NO.40(a)(i)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and (M7) PAGE NO.-89. ITEM NO.4 Other than SAIL/TATA/RINL) materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers ncluding locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.In ground floor. (M7)

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket,handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.In Ground floor (M7) (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] (M7)

(vi) steel peg stay 300 mm long including fitting and fixing.

(viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.

(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.(M7)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(M7)

(vii) 3 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size Cover: 450 mm X 50 mm Frame: 540 mm X 100 mm opening: 370mm Weight: 46 kg (approx)(M7) PAGE NO.-92. ITEM NO.8/vii

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work (Dia) 20 mm(i) 450 mm dia. AS PER P.W.D. SCHEDULE OF 2017(E5) PAGE NO.-12. ITEM NO.19I

Supplying, fitting and fixing pillar cock of approved make. P: 45, It: 19/a/i(E5)

Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).AS PER P.W.D. SCHEDULE OF 2017 (M1) PAGE NO.-80.ITEM NO.8(i)(b)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat Area : Kolkata / 24 Pgs (N & S) /Area of Kalyani Sub Div. Page no -196 (Item no - 8/a)(A1)

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion Area : Kolkata / 24 Pgs (N & S) /Area of Kalyani Sub Div. Page no -197 (Item no - 17/a)(A1)

Supplying, fitting and fixing beveled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm P: 81, It: 15(ii)(E2)

Signage for public toilet(E8)

Glow sing board name & contact details of the following are displayed prominently - toilet identification number , name of UlB under whoe jurisdiction toilet is covered , ward no and maintanence athority prominently displayed for each toilet block supervisor ,supervisors agency and area sanitary inspector (D3)

Standard Plastic (12L) Dustbin(E3)

Harpic (Blue 500 ml) (E4)

Harpic (Red 500 ml) (E4)

Odonil toilet air freshner (D5)

upplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads & lift, carriage, handling, manuring, applying presticide and fertilizer etc ) Furcaria veriegated 10-12 leaves in height 20-30cm in earthen pots of size 25cm.P: 261, It: 09(i) Plants, Plant pots(A3)

Maintanance of trees for one year (Avenue Plants) including watering, trimming, anuring, spraying insecticide and guarding as required. This includes supply of labour, tools & plants including materials. P: 260, It: 08 Plants, Plant pots (A3)

Supplying, fitting and fixing bib cock of approved make. P: 45, It: 19/a/i(E5)

Paper Napkin(A5)

ICT based feedback system(A9)

add 18% GST

add 1% GST