Municipal Affairs Department Tender

Supplying and Drawing 1.1KV single core stranded 'FR' PVC insulated & unscheated single core stranded copper wire (brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire amd making necessary connections as required. 3x22/0.3 (1.5 sqmm)

Supply and Fixing Pierce Connector ABC(50-70) sqmm. (WBSEDCL)

Supply and installation of Feeder Pillar Box of size 600 x 600 x 300 mm, having separate compartment at one side for metering arrangement on wooden board, made of 4 mm thick CRCA steel sheet, outdoor type with top canopy, sides having louvers for vetilation, double door, weather proof powder coating and would have 400 mm long 40 x 40 x 6 mm, 4 nos angle iron leg with 5 mm plate at their bottom end painted, complete with copper bus bar & extra locking arrangement as per direction of Engineer-in-Charge (Consisting the following items in the feeder pillar): i) 40 Amp, 230 Volt 4 Pole MCB 10ka Breaking Capacity (L & T) - 1 Set ii) 240V 40 Amp Air Break 3P AC Coil Contactor (L & T) - 1 No. iii) 230V, 24 Hrs. Time switch (G/C or similar make) - 1 No. iv) 5-10 Amp SPMCB (L & T / Havells) -6 Nos. (C - Series) v) Indicating lamp (LED) (Emco) - 3 Nos. vi) Cubical illu, Lamp & Limit Switch - 1 Set vii) Power terminal (ACDC) - 2 Sets viii) Amp Meter with C.T. (L&T) - 1 Set Installation of the Feeder to be done by earth cutting, brick soiling and C.C. foundation as required & sand filling, ramming and muffing around the Feeder Pillar Box by brick and cement mortar work as per the direction of the Engineer-in-Charge.

PWD (Elect.) G-I 2 (a) Earthing with 50 mm dia GI Pipe 3.64 mm thick x 3 mts. Long and 1 x 4 SWG GI wire (4 mtrs long) 13 mm dia x 80 mm long GI bolts double nuts, double washers including S & F 15 mm dia GI Pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.65 mts. below the ground level & restoring the surface duly rammed. (TATA)

PWD (Elect.) G-3 3 (a) Extra for providing masonary enclosure on the top of the earth electrode of overall size 86.36 cm. x 86.36 cm. x 46 cm. deep (below ground level) complete with cemented brick work (1:6) of 25 cm duly plastered with cement mortar inside. C.I. Hinged civer if 36.56 cm x 36.56 cm with seeking arrangements G.I. reducer including drilling of 46 nos. 12 mm dia holes on the G.I. Pipe.

PWD (Elect.) G-3 6 (b) Supply & laying / fixing of 25 x 6 mm G.I. Strip from earth electrode to feeder / sub-feeder pillar box as per direction of the Engineer-in-Charge.

Add GST 18%

Add Cess 1%