Municipal Affairs Department Tender

Average run 1.5 mtr

Average run 3.0 mtr

Average run 7.5 mtr

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light point with 2 no. 2 way Modular type switch (Brand approved by EIC) with Modular GI switch board & top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment flushed in wall incl. mending good damages to original finish. [PVC casingcapping on surface and Switch board concealed] Average run 12 mtr

Supplying and fixing PVC casing-capping [Precision Make] on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building works 20x10mm Size

25x10mm Size

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 20mm size

25mm size

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) 13mm dia 3mm thick Polythene Pipe

19mm dia 3mm thick Polythene Pipe

25mm dia 3mm thick Polythene Pipe

Cutting Channel by Electric operated cutting machine Cutting Channel of size (31 mm x 31 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 13 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles 13 mm dia 3 mm thick polythene pipe without earth continuity wire

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles 25 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and Drawing 1.1 KV single core stranded "FR" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. Connection as required. 3 X 22/0.3 (1.5 sqmm)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

4x84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC

2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC

4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.

Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit / in polythene pipe embeded in wall.

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 4 Module

6 Module

8 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 2 Module

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V 16 A Modular type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing RJ45 suitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Supply & Fixing Modular type RJ45 suitable for CAT6 cable (Brand approved by EIC) on existing GI / PVC board and top cover plate on wall and making necessary connections as required

Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) on existing GI Modular board having top cover plate and making necessary connections as required

Supply & fixing modular type Blank Plate on existing GI / PVC modular switch board with modular cover plate.

Supply of Modular TV socket (RG6 TV antenna socket)

DB, MCB, Main Switch, Cable Tray etc. Distribution Boards Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Legrand 2+4 way Enclosure (607710)

2+12 way Enclosure (607712)

2+16 way Enclosure (607713)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Legrand 4 way Enclosure (607715)

Legrand 6 way Enclosure (607716)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Legrand (40-63)A, 415V, FP MCB

Legrand (6-32)A, 415V, FP MCB

Legrand (40-63)A, 415V, TP MCB

Legrand (40-63)A, 240V, DP MCB

Legrand (6-32)A, 240V, DP MCB

Legrand (40-63)A, 240V, SP MCB

Legrand (6-32)A, 240V, SP MCB

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. Legrand 32A, 240V, DP

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection. Legrand 250A, FP

Supplying and fixing MCCB SS enclosure with IP-20/30 protection, pwder coated provision for housing Four pole (4P) MCCB, concealed in wall after cutting the wall & mending good the damages to original finish / on flat iron frame incl. painting, connection & provision for earthing attachment Legrand

Cable & Termination Laying on Wall / surface with Saddles / clamps Laying of cable upto 2 core 25 sqmm on wall / surface incl. S & FMS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable above 3½ core 95 sqmm and upto 3½ core 150 sqmm / 185 sqmm on wall / surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Laying through RCC / Hume / GI Pipe Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core

Laying through Underground Trench Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.

Compression Glands Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE / PVC armoured cables as below : For 2 core upto 4 sqmm

For 2 core upto 10 sqmm

For 3½ core upto 185 sqmm

Finishing cable ends Finishing the end of following XLPE / PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : Set comprises of all leads of the cable 2 core 4 sqmm cable

2 core 10 sqmm cable

3½ core 185 sqmm cable

Fixing of Light / Fan Fittings etc. Fixing only starters (for motor control) on flat iron frame / angle iron frame on wall Direct on Line starter for motor (upto 5 HP) On flat iron frame

Fixing only lamp.

Fixing only bulk head ceiling fitting on wall / ceiling by screws etc.

Fixing only single / twin fluorescent light fitting complete with all accessories directly on wall / ceiling by screws etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire.

Fixing only fan clamp for RC ceiling as per specification after cutting the ceiling & binding with reinforcement and mending good the damages.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12")

Supply & Fixing EI danger board on wall : 20 cm x 30 cm (8"x12")

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/ providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Earthing Installation – with Pipe Electrode : Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below : By TATA-Medium GI pipe

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts For Sub-station Neutral / Equipment / DG Body earthing

Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode For Sub-station Neutral / Equipment / DG Neutral earthing

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe

Earth Busbar Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Earth Continuity Conductor Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall / floor with staples buried inside wall / floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid GI wire No. 8 SWG

Earth Continuity Strip Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall / floor with GI saddles as required and connection to quipments incl. drilling holes, with bolts, nuts, washers etc.

Connecting the equipments to earth busbar including S & F 25 mm x 6 mm Galvanised (Hot Dip) MS Flat on wall / floor with GI saddles as required and connection to equipments with incl. drilling holes, bolts, nuts, washers etc.

Extra for connecting the neutral of Transformer / Earth busbar to earth electrode including S & F 50 mm x 6 mm Galvanized (Hot Dip) steel strip on wall/floor with GI saddles & insulating the same by one layer of PVC strip over one layer of ampere tape

Fixing of Light / Fan Fittings etc. Fixing only reccess type light fitting with lamp(s) as practicable as possible and providing necy. length of PVC insulated wire and making connection complete. Cutting of false ceiling shall be done by civil / other respective vendor but marking of the same shall be done by electrical vendor.

DB, MCB, Main Switch, Cable Tray etc. Supply & fixing MCB module Blank Plate on existing DB / enclosure as required.

Supplying and fixing double door Verticall TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 6 way Enclosure

Internal Wiring etc. Fixing Modular TV socket (RG6 TV antenna socket) in existing GI board and top cover plate on wall and making necessary connections & testing as required

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit / polythene pipe as required.

Supplying and fixing modular type call bell / buzzer and making connection complete as required.

Supplying and fixing modular type key-card switch with key fob and making connection complete as required.

Supplying and fixing following way TV spliter unit with required size of junction box, surfaced / concealed on/in wall as required to complete in all respect. 4 way

6 way

Supply & fixing heavy duty rigid PVC outdoor type junction box of 6" x 4" size with available depth.

Earthing Installation etc. Earth Continuity Strip Extra for connecting the neutral of Transformer / Earth busbar to earth electrode including S & F 50 mm x 6 mm Cu strip on wall / floor with GI saddles & insulating the same by one layer of PVC strip over one layer of ampere tape

L.T. Panel etc. Supply installation, testing and commissioning of Low voltage switchgears, free standing, extensible type, compartmentalised cubicle type, bottom entry panel made of 14 SWG (2.03 mm) CRCA MS sheet suitable for 415V, 50 HZ, AC, 3 phase and neutral system having the following features : Panel shall be designed to ensure that the weight of the components is adequately supported without deformation or loss in allignment. The doors of the cubicle shall be fitted with neoprene gaskets with fastner's for proper compression of the gaskets. Panel shall be multitier compatmentalised cubicle type, extensible on either side and shall be treated with all anticorrosive process before painting with two coats of zinc chromate printer and final approved shade of enamel paint. Busbars shall be of continuous rated electrolytic grade aluminiumr adequate for specified rated continuous and short circuit current covered by proper graded heat shrinkable PVC sleeves (colour coded). Busbars shall be supported by suitable DMC/SMC or compatable insulator supports. High tensile bolts and springs washers are to be provided on all busbars and suitable drilled holes for connection joints. The busbars shall have a through fault withstand capacity of 50kA RMS symmetrical for one second. The interconnections between the busbars and circuit breakers shall be made by continuous rated aluminium strips suitably covered by proper graded heat shrinkable colour coded PVC sleeves. The earth busbar shall run through the length of the panel and terminated at two ends. All the MCCBs shall be provided with extended rotary operated mechanism, Safety interlocks are to be provided to prevent the doors of the compartmants housing the MCCBs to prevent the doors to open when the MCCBs are in 'ON' position. All control wiring in the panel shall be carried out with 1.1 KV grade single core PVC insulated copper conductors of minimum 2.5 sq mm cross-section for potential circuits and CT circuits, Wiring should be neatly bunched, adequately supported, properly routed and finally crimped. Wires are to be identified by numbered ferules at either end. Terminal blocks used are of clamp type with barriered terminals and are to be numbered. Adequate cabling space should be available in the panel with cable supports, cable alleys, etc. Provision for top entry and termination of required number of A2XFY cable shall be provided. The position of control switches, push buttons, levers, etc requiring manual operation shall be at a height not excedding 1850 mm from the finished floor level. The rate shall also include providing and fixing space heater with thermostat control tempearature controler including connecting the same with the system with all other accessories viz sockets, ets required. The panel shall also be provided with cubicle illumination lamps as per requirment including connecting the same within the panel with all other accessories required. Note : All MCCBs/ACBs should have microprocessor based releases unless otherwise mentioned. Main LT Panel Incoming Provision : 2 nos. 250A, 415V, FP, 25KA, TM release MCCB 1 no.250A, 415V, FP, Auto Source Transfer Switch 2 set of 0-250A Ammeter, Accuracy Class 1.0 with 3 nos. 250/5A CTs and Ammeter selector switch.. 2 Set - ON,OFF,Trip, indication LED lamps with protection fuse 2 Set - R,Y,B Phase indication LED lamp with protection fuse Busbars-1 1 set 300A, 415V, 50 HZ, aluminium busbars mounted on suitbale hylam/DMC/SMC insulators/supports with proper graded colour coded heat shrinkable PVC sleeves. Outgoing Provision from Bus-1 : 1 no. 125A, 415V, FP, 25KA, TM release MCCB 1 set of 0-250A Ammeter, Accuracy Class 1.0 with 3 nos. 250/5A CTs and Ammeter selector switch 1 Set - ON,OFF,Trip, indication LED lamps with protection fuse 1 Set - R,Y,B Phase indication LED lamp with protection fuse 3 no. (40-63)A, 415V, FP, MCB 5 no. (6-32)A, 415V, FP, MCB 6 no. (6-32)A, 240V, DP, MCB Complete Board as stated above.

Cable etc. Supply of following size L.T. cable, working voltage 1.1 KV grade, heavy duty XLPE insulated, armoured, screened, stranded, Al distribution power conductor cable. 2C, 4 sqmm.

2C, 10 sqmm.

3.5C, 185 sqmm.

Supply of Fittings & Fixtures etc. Supply of following light, fan, pole fittings & fixtures : Fan Fittings : Providing double ball bearing capacitor start 1200 mm sweep ceiling fan with complete without regulator and including other accessories as required. Similar to : Crompton Greaves Avancer Prime Decorative Ceiling Fan with Anti Dust Technology (Honey Wood, 1200 mm) Or any such similar type fittings of reputed make (prior to Engineer's / Client's / Architect's approval). As required to complete set.

Providing of 250/300 mm sweep 900/1400 RPM single phase ISI marked Exhaust fan, including other accessories as required. Similar to : Crompton Brisk Air 250 mm (10 inch) Exhaust Fan Or any such similar type fittings of reputed make (prior to Engineer's / Client's / Architect's approval). As required to complete set.

Indoor Light Fittings : Similar to (LED Recess Downlight) Philips make : GreenPerform Sleek Cat No. : DN296B LED12S-6500 PSU WH - as required to complete set.

Indoor Light Fittings : Similar to (LED Recess Downlight) Philips make : GreenPerform Sleek Cat No. : DN295B LED6S-6500 PSU WH - as required to complete set.

Indoor Light Fittings : PHILIPS Sigma model Decorative Indoor Wall Light with B22 Base Lamp

Indoor Light Fittings : Similar to PHILIPS 3 Watt Aluminium Bedside Light, Warm White

Indoor Light Fittings : Similar to Philips Mirror LED Light 31167

Indoor Light Fittings : Similar to (LED Panel Light) Philips make : FullGlow G5 (2' x 2') Cat No. : RC380B LED25S-6500 G5 L60W60 PSU OD - as required to complete set.

Indoor Light Fittings : Similar to (LED Surface Downlight) Philips make : Sleek Surface Downlight Cat No. : SM250C LED7S- 6500 PSU WH - as required to complete set.

Indoor Light Fittings : Similar to (LED Batten Light) Philips make : SmartBright Cat No. : BN021C LED22S PSU CW GR - as required to complete set.

Indoor Light Fittings : 9W LED Bulb Philips make

Outdoor Light Fittings : Similar to (LED Bulkhead Light) Philips make : EnduraLED Bulkhead Cat No. : WT202W LED6S CW or NW PSU S2 PC - as required to complete set.

Outdoor Light Fittings : Similar to (LED Outdoor Street Light) Philips make : SmartBright Street Cat No. : BRP042 P LED25 CW SLE S1 PSU GR P4210 - as required to complete set.

Supply & Installation of D.G. Set etc. Supplying installation, testing and commissioning of 1 no. Diesel Generating Set of capacity 160 KVA at 0.8 P.F., 415 Volt, 3-phase, 4-wire, 50Hz complete with Air cooled radiator type 1500 RPM Diesel Engine in sound attenuated with acoustic weather proof enclosure conforming to present CPCB norms and certification, base frame, self starting devices, sealed maintenance free starting batteries, battery charger, Engine with local control panel with equipment and instruments mounted on the engine frame, Diesel fuel tank of required capacity inlet outlet and draining points with necessary piping, full tank fuel oil, level indicator, first fill of lube oil, silencer, top cover mounting stand complete, silencer, AVM rubber footings, self regulated and self excited brushless type of continuous output 160 KVA at 0.8 PF, 3 Phase 4 wire, 415 Volts 50 HZ at 1500 RPM with automatic regulator and speed control governor, AMF panel including supply & installation, inter connection cabling, earthing & accessories, required size & length exhaust piping works complete as well as obtaining necessary approval & clearances from various Statutory Authorities for running the above D.G. Set. The 160 KVA DG Set comprising of suitable engine developing required BHP coupled to 160 KVA, 415 V alternator mounted on a common base frame. Acoustic Enclosure suitable for 1 x 160 KVA DG set. Adopter box with AL extended bus bar Supply & Installation of AMF panel for 1x160 KVA DG Set. EXHUAST SYSTEM Required size MS Black Pipe Class B complete with Bends & Flanges etc. Required size & thick MS Vertical Exhaust pipe complete with bends and flanges etc. Thermal Insulation on horizontal & vertical pipe with Mineral Wool of required Thick wire mesh and required gauge aluminium cladding etc. MS Self Support structure Aluminium cladding of residential silencers SS Flexible Bellows. FUEL SYSTEM Supply and Installation of MS Class C Pipe with required dia with bends, flanges packing as required. Supply and fixing of set of Fuel Pipe fittings like valves, tee, elbows etc. CABLE & EARTHING SYSTEM Required size of power & control cable but the system earthing considering existing scope & site situation as required to complete in all respect. Complete D.G. set as stated above with DG base foundation.

Added extra as per PWD Schedule Preface clause no. A. ( i ), 2% additional charges on PWD-Scheduled-Items Total :

CGST @ 9%

SGST @ 9%

Cess @1%