Municipal Affairs Department Tender

Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. (iii) 125 mm diameter

(i) 100mm diameter

Coal tarring on wooden surfaces including cost of materials (b) Single coat

Supplying empty Cement bags in good condition.

Filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags.

Labour for fitting and fixing 10 cm. to 13 cm. diameter Sal-bullah/Eucalyptus-bullah as ties and runners including necessary nails, bolts and nuts.

(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as …. ramming complete including the cost of supply of sand. Do by fine sand

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. i) pakur variety

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of ... fitting, fixing and striking out after completion of works (f) 25 mm to 30 mm shuttering without staging in foundation

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Supplying and laying in the specified pattern of interlocking concrete block pavement (ICBP) with concrete blocks (with concrete grade as specified as per table 1of IS 15658: 2006) manufactured from BIS licensee manufacturer, with spacer nib ( small protruding profiles on the vertical face of a paver block used as a deviced for keeping minimum joint gap in between the paving blocks, as per Cl. No.3.26 of IS 15658) and of specified size and shape with aspect ratio (the ratio of lenght to thickness of a paver block, as per CL. No 3.3 of IS 15658) as per table 2 of IS 15658 with flexural strength/ breaking loads as per Annexture G of IS 15658 on the prepared base course of specified CBR as per table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick ( grading of the bedding sand as per Cl. 6.5.1 of IRC SP-63) and filling up the gaps in between paver blocks with joints filling sand(the grading of the joint filling sand will be as per Cl. 6.5.2 of IRC SP-63) and completing the edges with cut blocks as per CL. No. 8.7 of IRC SP-63(2018) with proper confinement of bedding and joint filling sand , compaction, levelling and filling up of the edge gap. 50 mm Thick (ii) Coloured Decorative

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth

Plaster (to wall, floor, ceiling etc.) with composite mortar of sand, lime and cement including round off or chamfering corners as directed and raking out joints and ..... nosing and drip course where necessary (Ground floor) (ii) With 1:4 cement mortar (b) 20 mm thick plaster

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface …. complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification a…. the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor. i) pakur variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, ... per drawing and direction. (i) Tor steel/Mild Steel B. SRMB, ELEGANT STEEL, CAPTAIN, BALAJI SHAKTI, HEXA, RUNGTA STEEL, ADHUNIK, SUPER SHAKTI, SALUJA GOLD, RASHMI TMT, SEL, SEL TIGER.

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) .... be supplied by the contrr]e) I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colou

Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 ( 8 parts of stacked volume of earth after reduction by 20%, one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary watering and finally fine dressing, levelling etc., including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50m lift upto 1.5m complete. This includes supply of labour, tools & plants including materials. Planting hedge plants in two rows at 30cm apart

Maintenance of hedge for one year including application of necessary pesticide, farm yard manure, replacement of damaged hedge plant by new one complete in all respect as per instruction of Engineer-in-charge. This includes supply of labour, tools & plants including materials.

Supplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads & lift, carriage, handling, manuring, applying presticide and fertilizer etc. i) Rangon chineese of size not less than 20cm

ii) China palm of leaves 4-5 in earthen pots size 25cm

iii) Ficus bengalensis (variegated) of height 60-75cm in earthen pots size 30cm

iv) Ficus elastica Decora ( Rubber plant ) of height 90cm-60cm in each earthen pot of size 25cm.

v) Bougainvillea (name variety, bushy plants, full bloom) of height 90cm-60cm in cement pots of size 30cm.

vi) Croton (broad leaves) 3-5 branches of height 90cm-120cm in cement pots of size 30cm.

vii) Hibiscus Rosa Sinensis of height 60 cm to 75 cm in earthen pots of size 35 cm.

viii) Areca Palm 4 - 5 suckers of height 120 cm to 135 cm in earthen pots of size 25 cm.

ix) Dracaena (Mahatma) of height 30 cm to 90 cm in earthen pots of size 20 cm.

Sub Total

GST 18%

CESS 1%