Municipal Affairs Department Tender

Single Brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. SOR, PWD (BUILDING), 3RD CORRIGENDA, PAGE NO:-1, ITEM NO :- 1

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety SOR, PWD (BUILDING), 3RD CORRIGENDA, PAGE NO:-24, ITEM NO :- 4

Artificial stone in floor, dado, staircase etc with cementconcrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and applicationof cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. Using grey cement,SOR, PWD (BUILDING), 3RD CORRIGENDA, PAGE NO:-48 ITEM NO :- 6.

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth B.S. ITEM NO -08, Page- 15

Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure, ground floor B.S. ITEM NO -08, Page- 15

Plaster (to wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface including throating nosing and drip course where necessy. (i) With 1:4 cement mortar. 15 mm thick plaster. In Ground Floor RATE ANALYSIS ENCLOSED

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. B.S. ITEM NO -15, Page- 192

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (f) 25 mm to 30 mm shuttering without staging in foundation SOR, PWD (BUILDING), PAGE NO:-42, ITEM NO :- 36(a)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. i) Pakur Variety Rate Analysis Enclosed SOR, PWD (BUILDING), PAGE NO:-26, ITEM NO :- 10 Rate Analysis Enclosed

Reinforcenment for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite lenght, hooking and bending to correct shape, plicing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. I. SAIL/ TATA/RINL B.S. ITEM NO -40, Page- 43, 10 TH CORR. SOR, PWD (BUILDING), PAGE NO:-43, ITEM NO :- 36(f)

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m SOR, PWD (BUILDING), PAGE:- 200 , ITEM :- 1

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete ncluding cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using lectrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plantsand labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in elevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of inished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. i) For roof truss works a) Span up to 12 Mtr SOR, PWD (BUILDING), PAGE:- 101 , ITEM :- 2A ,3RD CORRI.

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in…. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. B.S. ITEM NO -13, Page- 104,

Supplying, fitting & fixing polycarbonate sheet of approved make & brand conforming to IS: 14443-1997 and having 50 micron UV protection layer under co-extrusion technology, Fire rating being B-s1 as per EN13501-1 certification, fitted and fixed with 60mm wide aluminium channel section top and bottom member in dry-glaze sandwitch system, (unit wt. of top and bottom members: 0.375 kg/m & 0.69 kg/m) of approved brand and profile, EPDM quality rubber gaskets, anti dust tape, end closer "C" channel and 75 mm long Self tapping screw being drilled through the centre leg of the bottom section with nuts placed at 300 mm apart without anyway puncturing the polycarbonate sheet, EPDM Washer 16 mm dia & 3 mm thick washer etc complete strictly as per manufacturers specification and direction of Engineer-inCharge. (Payment to be made on area of finished work) . In Roof:- Natural/ Blue/Green/Bronze/Opal/Metallic grey colour. A0WITH 2 WALL 6MM OVER ALL THICKNESS SOR PWD (BUILDING), PAGE:- 86 ,ITEM 22(A)

Priming one coat on steel or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. SOR, PWD (BUILDING), PAGE:- 200 , ITEM :- 1

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on steel surface ii) Two Coats (except white in shade) SOR, PWD (BUILDING), PAGE:- 200 , ITEM :- 2

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats, i) Water based interior grade Acrylic Primer, B.S P-195, IT -07

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats), ii) Luxury Quality B.S P-201, IT -4

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamp nails, including Making holes in walls, floor etc. cutting trenches in any soil through Masonry concrete structures etc if necessary and mending good damages including joining with jointing Materials (Spun Yarn, Valamoid/bitumen/MSeal etc) complete. UPVC Pipes: 110 mm. Dia B.S. ITEM NO -21, Page- 212

B) UPVC Fittings: a) Plain Tee, (ii) 110 mm. Dia.

B) UPVC Fittings: a) Plain Tee, (i) 75 mm. Dia.

B) UPVC Fittings: c) Bend 87.5 degree (ii) 110 mm. Dia.

B) UPVC Fittings: c) Bend 87.5 degree, (i) 75 mm. Dia.

B) UPVC Fittings: d) Shoe (ii) 110 mm. Dia.

B) UPVC Fittings:, d) Shoe (i) 75 mm. Dia.

GST @18%

Cess @1%